2014.5 Citroen C4 PICASSO RHD ad blue

39
Warning / indicator lampState CauseAction / Observations
+
+ SCR emissions
control system

(BlueHDi Diesel) fixed,
  on   switching   on   the   ignition,  
a

ssociated   with   the   SERVICE   and  
e

ngine   diagnostic   warning   lamps,  
a

ccompanied
 b
y
 an a
udible
 s
ignal
 an
d
 a

  message   indicating   an   emissions  
c

ontrol   fault.A
  fault   with   the   SCR   emissions   control  
s

ystem   has   been   detected.This
  alert   disappears   once   the  
e

xhaust   emissions   return   to   normal  
l

evels.
flashing,
  on   switching   on   the   ignition,  
a

ssociated   with   the   SERVICE   and  
e

ngine   diagnostic   warning   lamps,  
a

ccompanied
 b
y
 an a
udible
 s
ignal
 an
d
 a

  message   indicating   the   remaining  
d

riving
 r
ange.The
  remaining   driving   range   is  
b

etween   0   and   650   miles   (1   100   km).Contact
  a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop
 w
ithout delay, to
avoid a breakdown .
flashing,
  on   switching   on   the   ignition,  
a

ssociated   with   the   SERVICE   and  
e

ngine   diagnostic   warning   lamps,  
a

ccompanied   by   an   audible   signal  
a

nd   a   message   indicating   that   starting  
i

s   prevented. You
  have   exceeded   the   authorised  
d

riving   limit:   the   starting   inhibition  
s

ystem   prevents   starting   of   the  
e

ngine.To
  be   able   to   start   the   engine,   you  
m

ust
 
call   on   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
1
Monitoring

40
Service indicator
System which informs the driver when the next   service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vicing
 s
chedule.
The
  point   at   which   the   service   is   due   is  
c

alculated   from   the   last   indicator   zero   reset,  
a

ccording   to   the   mileage   covered   and   the   time  
e

lapsed   since   the   last   service.
For
  BlueHDi   Diesel   versions,   depending   on   the  
c

ountry   of   sale,   the   degree   of   deterioration   of  
t

he   engine   oil   may   also   be   taken   into   account.
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service information   appears   in   the   screen.
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the spanner s ymbolising t he ser vice o perations c omes o

n.   The   distance   recorder   display   line   indicates   the
 d

istance   remaining   before   the   next   service   is   due.
Example:
 

1   700   miles   (2   800   km)   remain   before
 t

he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,   the
 s

creen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   and   trip   distances.5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on to
indicate
  that   a   service   must   be   carried   out  
s

oon.
Monitoring

41
Service overdue
For 5 seconds after the ignition is switched on, the spanner flashes  to   indicate   that   the   service m

ust   be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   186   miles
 (

300   km).
For
  5   seconds   after   the   ignition   is   switched   on,
 t

he   screen   indicates: Therefore,
  the   spanner   may   come   on  
i

f   you   have   exceeded   the   period   since  
t

he   last   service,   as   indicated   in   the  
ma

nufacturer's
 ser
vice
 s
chedule.
For
  BlueHDi   versions,   the   spanner   may  
a

lso   come   on   early,   according   to   the  
l

evel   of   deterioration   of   the   engine   oil,  
w

hich
 d
epends
 o
n
 t
he
 d
riving
 c
onditions
 i

n   which   the   vehicle   is   used.
5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on .
With
b
l
ueH
di
d
i
esel versions, the Service
warning
  lamp   also   comes   on   when   the   ignition  
i

s   switched   on.
1
Monitoring

96
Heating
Temperature adjustment
F Press one of these buttons, or   move   the   cursor   from   blue  
(

cold)   to   red   (hot)   to   adjust   the  
t

emperature   to   your   wishes.
Air flow adjustment
F Press one of these buttons to increase   or   decrease   the   speed  
o

f   the   booster   fan.
Air distribution adjustmentThe intake of exterior air prevents and eliminates   misting   of   the   windscreen   and   side  
w

indows.
The
  recirculation   of   interior   air   prevents   exterior  
o

dours   and   smoke   entering   the   passenger  
c

ompartment.
Windscreen.
Centre
 
and
 
side
 
vents.
Footwells. The
  air   distribution   can   be   varied   by   using   more  
t

han   one   button.
Each   press   of   a   button   activates   or   deactivates  
t

he   function.
The   indicator   lamp   is   on   when   the   button   is  
a

ctivated.   For   an   even   distribution   of   air   in   the  
p

assenger   compartment,   the   three   buttons   can  
b

e   activated   simultaneously.
Air intake / Air recirculation
F Press this button to recirculate
the   interior   air.   The   indicator  
l

amp   in   the   button   comes   on.
F
 
P
ress   the   button   again   to   allow  
t

he   intake   of   exterior   air.   This   is  
c

onfirmed   by   the   indicator   lamp  
g

oing   off.
Avoid
 
driving
 
for
 
too
 
long
 
without
 
v

entilation
 
(risk
 
of
 
misting
 
and
 
d

eterioration
 
of
 
air
 
quality).
The
 
heating
 
system
 
works
 
only
 
when
 
the
 
e

ngine
 
is
 
running.
Press the button for the " Air conditioning"
menu
 
to
 
display
 
the
 
page
 
for
 
the
 
system
 
c

ontrols.
The
 
symbol
 
for
 
air flow
 
(a
 
fan)
 
fills
 
progressively
 
a

ccording
 
to
 
the
 
air
 
flow
 
setting
 
made.
By
 
reducing
 
the
 
air
 
flow
 
to
 
the
 
minimum,
 
you
 
a

re
 
stopping
 
ventilation
 
of
 
the
 
passenger
 
c

ompartment.
Comfort

97
Dual-zone manual air conditioning with temperature regulation
The air conditioning system operates with the engine r unning.
The
  temperature   at   the   nozzles   and   vents  
i

s   regulated   by   the   system   according   to   the  
t

emperature   in   the   passenger   compartment  
a

nd   the   temperature   setting.
Press the button for the " Air conditioning"
menu
  to   display   the   system   controls   page.Temperature adjustment
F Press one of these buttons to reduce   (blue)   or   increase   (red)  
t

he   value.
Air flow adjustment
Press one of these buttons to
increase   or   decrease   the   speed   of  
t

he   air   booster   fan.
The
 
driver
 
and
 
front
 
passenger
 
can
 
each
 
adjust
 t
he t
emperature.
The value indicated corresponds to a level of c
omfort   and   not   to   a   temperature   in   degrees   Celsius o

r   Fahrenheit   (depending   on   the   unit   selected).
A setting of around 21 provides optimum comfort.   Depending   on   your   requirements,  
a
  setting   between   18   and   24   is   normal.
In
  addition,   it   is   recommended   that   a   difference  
b

etween   left   and   right   of   more   than   3   should   be  
av

oided. The
  air   flow   symbol   (a   fan)   fills   progressively  
a

ccording   to   the   quantity   of   air   wanted.
By   reducing   the   air   flow   to   minimum,   you   are  
s

topping
 v
entilation.
Avoid  
d
riving  
t
oo  
l
ong  
w
ithout  
v
entilation  
(

risk   of   misting   and   deterioration   of   air  
q

uality).
3
Comfort

150
Operation
Gear efficiency indicator
System which reduces fuel consumption by recommending the most suitable gear.
T he   system   adapts   its   gear   change  
r

ecommendation   according   to   the  
d

riving   conditions   (slope,   load, ...)   and  
t

he   demands   of   the   driver   (power,  
a

cceleration,   braking, ...).
The
  system   never   suggests:
-
 
e
ngaging   first   gear,
-
 enga

ging
 r
everse
 g
ear,
Example:
The
  information   appears   in   the   instrument  
p

anel   in   the   form   of   an   arrow.
On
  vehicles   with   manual   gearbox,   the   arrow  
c

an   be   accompanied   by   the   recommended  
g

e a r.
Depending
  on   the   driving   situation   and   your  
v

ehicle's   equipment,   the   system   may   advise  
y

ou   to   skip   one   or   more   gears.
You
  can   follow   this   instruction   without   going  
t

hrough   the   intermediate   gears.
The
  gear   engagement   recommendations   must  
n

ot   be   considered   compulsory.
This
  is   because   the   configuration   of   the   road,  
t

raffic   density   and   safety   remain   important  
f

actors   in   the   choice   of   the   best   gear.
So
  the   decision   to   follow   or   not   the   indications  
f

rom   the   system   remains   with   the   driver.-
 
Y
ou   are   in   third   gear.
-
 
Y
ou   press   the   accelerator   pedal.
-
 
T
he   system   may   suggest   that   you   engage  
a

  higher   gear.
With
  an   electronic   or   automatic   gearbox,   the   system   is   only   active   in   manual   mode.
On
  BlueHDi   135   and   150   versions   with   manual  
g

earbox,  
t
he  
s
ystem  
m
ay  
s
uggest  
c
hanging  
i
nto  
n

eutral   so   that   the   engine   can   go   into   standby  
(

Stop  
m
ode   with   Stop  
&
 
S
tart),  
i
n  
c
ertain   driving  
c

onditions. This
  function   cannot   be   deactivated.
Driving

151
Stop & Start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). 
T he   engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Operation
Going into engine STOP
mode
The "ECO" warning   lamp   comes   on   in   the  i
nstrument   panel   and   the   engine   goes   into  
s

tandby
 a
utomatically:
-
 
w
ith a manual gearbox,   at   speeds   below  
1

2   mph   (20   km/h),   or   vehicle   stationary  
(

with   e-THP   130   and   165   petrol   versions  
a

nd   BlueHDi   100,   115   and   120   versions),  
w

hen   you   place   the   gear   lever   in   neutral,  
a

nd   you   release   the   clutch   pedal,
-
 
w
ith an electronic gearbox,   at   speeds  
b

elow   5   mph   (8   km/h),   when   you   press   the  
b

rake   pedal   or   place   the   gear   selector   lever  
i

n position N ,
-
 
w
ith an automatic gearbox, with the
vehicle stationary, when you press the
brake
  pedal   or   place   the   gear   selector   lever  
i

n position N . Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   START/STOP   button.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
STOP
  mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Special cases: STOP mode not
available
STOP mode is not invoked when:
-  t he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   using  
t

he   START/STOP   button,
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes   for   a   few   seconds   then   goes  
o

f f.
This operation is perfectly normal.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
If
 
your
 
vehicle
 
is
 
fitted
 
with
 
the
 
system,
 
a
 
time
 c
ounter
 
calculates
 
the
 
sum
 
of
 
the
 
periods
 
in
 
S

TOP
 
mode
 
during
 
a
 
journey.
 
It
 
resets
 
itself
 
to
 
z

ero
 
every
 
time
 
the
 
ignition
 
is
 
switched
 
on
 
with
 
t

he
 
START/STOP
 
button.
4
driving

152
Going into engine START mode
The "ECO" warning   lamp   goes   off  a
nd   the   engine   starts   automatically:
-
 
w

ith a manual gearbox , when you fully
depress
  the   clutch   pedal,
-
 
w

ith an electronic gearbox:
●
 
g

ear   selector   lever   in   position   A or M,
when
  you   release   the   brake   pedal,
●
 
o

r
 
gear   selector   lever   in   position   N
and
  the   brake   pedal   released,   when  
y

ou   place   the   gear   selector   lever   in  
p

osition

A or M ,
●
 
o

r
 
when   you   engage   reverse   gear.
-
 
w

ith an automatic gearbox:
●
 
g

ear   selector   in   position   D or M, when
you
  release   the   brake   pedal,
●
 
o

r
 
gear   selector   in   position   N   and   brake  
p

edal   released,   when   you   place   the   gear  
s

elector in position D or M ,
●
 
o

r
 
when   you   engage   reverse. START
  mode   is   invoked   automatically   when:
-  y ou   open   the   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   15   mph  
(

25   km/h)   with   a   manual   gearbox   (2 mph  
(

3   km/h)   with   e-THP   130   and   165   petrol  
v

ersions   and   BlueHDi   100,   115   and  
1

20   versions),   7   mph   (11   km/h)   with   an  
e

lectronic   gearbox   and   2   mph   (3   km/h)   with  
a

n   automatic   gearbox,
-
 
t
he   electric   parking   brake   is   being   applied,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   for   control   of   a   system.
Special cases: START invoked
automatically
If the system has been deactivated in   STOP   mode,   the   engine   restarts  
i

mmediately.
Deactivation
  of   Stop   &   Start   is   done   in   the  
"
D

riving assistance
"  menu.
Deactivation
In this case the "ECO" 
warning   lamp  f
lashes   for   a   few   seconds,   then   goes  
o

f f.
This operation is perfectly normal. Press
  this   button   to   deactivate   the  
s

ystem.
This   is   confirmed   by   the   indicator  
l

amp   in   the   button   and   this   symbol.
When   driving   on   a   flooded   road,   it   is  
r

ecommended   that   the   Stop   &   Start  
f

unction   be   deactivated   and   that   you  
d

rive   very   slowly.
Driving