2014.5 Citroen C4 pairing phone

08
342
Pairing a Bluetooth telephone
First connectionFor reasons of safety and because they require prolonged attention on  the   part   of   the   driver,   the   operations   for   pairing   the   Bluetooth  
mobile

  telephone   to   the   hands-free   system   of   the   audio   system   must  
be

  carried   out   with   the  
vehicle stationary
.
Select "Bluetooth Connection ".
Press on Telephone
 
to
 
display
 
the
 
primary
 
page

 
then
 
go
 
to
 
the
 
secondary
 
page. Select Search.
The
  list   of   telephones   detected   is   displayed.
Activate
 
the
 
telephone's
 
Bluetooth
 
function
 
and

 
ensure
 
that
 
it
 
is
 
"visible
 
to
 
all"
 
(telephone
 
configuration). Procedure (short) from the telephone
In

 
the
 
Bluetooth
 
menu
 
of
 
your
 
device,
 
select
 
the
 
system

 
name
 
in
 
the
 
list
 
of
 
devices
 
detected.
Enter
 
a
 
code
 
of
 
at
 
least
 
4
 
figures
 
in
 
the
 
device
 
and

 
confirm.
Enter
 
this
 
same
 
code
 
in
 
the
 
system,
 
select
 
"OK"
and
 
confirm.
Procedure from the system
The
  system   offers   to   connect   the   telephone:
-
 
in
  "Telephone"   (hands-free   kit,   telephone   only),
-
 
in
  "Audio streaming"   (streaming:   wireless   playing   of   audio   files  
from

  the   telephone),
-
 
in
  "Internet"   (internet   browsing,   only   if   your   telephone   is  
compatible

  with   the   "DUN"   Dial-Up   Networking   Bluetooth  
standard).
Select

  one   or   more   profiles   and   Confirm.
Select
  the   name   of   the   desired   peripheral   from  
the

  list   and   Confirm.
BLUETOOTH
If the telephone is not detected, it is recommended that you switch the  Bluetooth   function   on   your   telephone   off   and   then   on   again.
Enter
  a   code   of   at   least   4   figures   for   the  
connection then "Confirm

".
Enter
  this   same   code   in   the   telephone   then  
accept

  the   connection.

08
343
Depending
 
on
 
your
 
telephone,
 
you
 
may
 
be
 
asked
 
to
 
accept
 
automatic

 
connection
 
every
 
time
 
the
 
ignition
 
is
 
switched
 
on.
Depending
 
on
 
the
 
type
 
of
 
telephone,
 
the
 
system
 
will

 
ask
 
you
 
to
 
accept
 
or
 
not
 
the
 
transfer
 
of
 
your
 
contacts. The

 
services
 
available
 
depend
 
on
 
the
 
network,
 
the
 
SIM
 
card
 
and
 
the
 
compatibility

 
of
 
the
 
Bluetooth
 
telephone
 
used.
 
Check
 
the
 
telephone
 
manual

 
and
 
with
 
your
 
network
 
provider
 
for
 
details
 
of
 
the
 
services
 
available

 
to
 
you.
On
 
return
 
to
 
the
 
vehicle,
 
the
 
last
 
telephone
 
connected
 
automatically
 
reconnects,

 
within
 
around
 
30
 
seconds
 
after
 
switching
 
on
 
the
 
ignition
 
(Bluetooth

 
activated).
To
 
modify
 
the
 
automatic
 
connection
 
mode,
 
select
 
the
 
telephone
 
in
 
the

 
list
 
then
 
select
 
the
 
desired
 
profile.
The
 
telephone
 
is
 
added
 
to
 
the
 
list.
BLUETOOTH
If not, select "
Update".
The   ability   of   the   system   to   connect   with   only   one   profile   depends   on  
the

  telephone.  
The
  two   profiles   may   both   connect   by   default.
Visit   www.citroen.co.uk   for   more   information   (compatibility,   additional  
help,

  ...).
Automatic reconnection
Connecting a Bluetooth peripheral
On switching on the ignition, the telephone connected when the ignition
  was   last   switched   off   is   automatically   reconnected,   if   this  
connection

  mode   had   been   activated   during   the   pairing   procedure.
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.
Press on Telephone
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
Manual connection
Select "Bluetooth"
  to   display   the   list   of   paired  
peripherals.
Select

  the   peripheral   to   connect.
Press on "Search".
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.

08
Receiving a call
An incoming call is announced by a ring and a superimposed display in  the   screen.
Make
  a   short   press   on   the   steering   mounted  
TEL

  button   to   accept   an   incoming   call.
Make
  a   long   press   on   the   steering   mounted  
TEL

  button   to   reject   the   call.
or
Select "End call".
Managing paired telephones
Press on Telephone to display the primary page   then   go   to   the   secondary   page.
Select "Bluetooth"
  to   display   the   list   of   paired  
peripheral

  devices.
Select
  the   peripheral   in   the   list.
Select:
-
 
"
Search" or "Disconnect" to connect or
disconnect
  the   Bluetooth   connection   with  
the

  peripheral   selected.
-
 
"
Delete"   to   remove   the   pairing.
BLUETOOTH
344This   function   allows   the   connection   or   disconnection   of   a   peripheral  
device

  as   well   as   the   deletion   of   a   pairing.

05
371
USING THE TELEPHONE
Pairing a telephone
First connection
The services offered depend on the network, the SIM card and the compatibility of the Bluetooth telephone used.
Consult   your   telephone's   manual   and   your   operator   to   find   out   which   services   are   available   to   you.
Activate
  the   telephone's   Bluetooth   function   and  
ensure that

it is "visible to all" (refer to the telephone
user
  guide). Press MENU. A
 

window   is   displayed   "Search in progress…".
Select
  the   telephone   to   be   connected  
from

  the   list.   Only   one   telephone   can  
be

  connected   at   a   time.
Select "Search for a device".
For
  safety   reasons   and   because   they   require   prolonged   attention   on   the   part   of   the   driver,   the   operations   for   pairing   of   the   Bluetooth   mobile  
telephone

  with   the   Bluetooth   hands-free   system   of   your   audio   system   must   be   carried   out   with   the  
vehicle stationary
  and   the   ignition   on.
Visit
  www.citroen.co.uk   for   more   information   (compatibility,   additional   help,   ...).
Select "Bluetooth connection "
  and  
confirm.

05
Saisir code authentification
01
OK Del 23456789
_
372
USING THE TELEPHONE
A 
virtual   keypad   is   displayed   on   the  screen:
  enter   a   code   with   at   least  
4 digits

  and   conform   with  
OK
.
A
 

message
 
is   displayed   on   the   screen   of   the  
telephone:

 
enter   the   same   code   and   confirm. A
 

message   appears   in   the   screen   to   confirm   the   result   of   the  
connection.
Pairing

  can   also   be   initiated   from   the   telephone   by   searching   for  
detected

  Bluetooth   devices.
Accept
  the   connection   to   the   telephone.
If
 
pairing
 
fails,   try   again;   the   number   of   attempts   is   not   limited.The
  directory   and   the   calls   list   can   be   accessed   after   the  
synchronisation

  period   (if   the   telephone   is   compatible).
Automatic
  connection   must   be   configured   in   the   telephone   to   allow  
the

  connection   each   time   the   vehicle   is   started.
In
 
some
 
cases,   the   reference   number   of   the   telephone   or   the  
Bluetooth

 
address   may   appear   instead   of   the   name   of   the   telephone.
Pair/connect   the   telephone   then   listen:   see   the  
AUDIO
  section.
Streaming - Playing audio files via
Bluetooth

05
373
USING THE TELEPHONE
The telephone connection automatically includes hands free operation and  audio   streaming.
The
  ability   of   the   system   to   connect   to   just   one   profile   depends   on   the  
telephone.

  Both   profiles   may   connect   by   default.
Press MENU.
Select "Bluetooth connection "
  and  
confirm. Indicates

  connection   of   the   audio   steaming   profile.
Managing connections
Select "Connections management"
and  confirm.  The   list   of   paired  
telephones

  is   displayed. Select
  a   telephone   and   confirm.
Indicates   connection   of   the   hands-free   profile.
Then   select   and   confirm:
-  
"
Connect telephone
"   /   "
Disconnect
telephone":   to   connect   /   disconnect  
the

  telephone   or   the   hands-free  
connection

  only.
-  
"
Connect media player"   /  
"

Disconnect media player":   to  
connect

  /   disconnect   only   streaming.
-  " Connect telephone + media
player"   /   "Disconnect telephone +
media player":   to   connect   /  
disconnect

  the   telephone   (hands-free  
and

  streaming).
-
 
"
Delete connection":   to   delete   the  
pairing.
Indicates

  that   a   device   is   connected.

Audio and Telematics
72
Pairing a Bluetooth ® Pairing a Bluetooth ® Pairing a Bluetooth
telephone
For reasons of safety and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the audio system must be carried out with the vehicle stationary . stationary . stationary
Procedure (short) from the telephone
In the Bluetooth menu of your device, select the system name in the list of devices detected.
Enter a code of at least 4 figures in the device and confirm.
Enter this same code in the system, select " OK " and confirm.
Procedure from the system
Activate the telephone's Bluetooth function and ensure that it is "visible to all" (telephone configuration).
Press on Telephone to display the primary page.
Press on the secondary page.
Select " Bluetooth connection ".
Select Search . The list of telephones detected is displayed.
If the telephone is not detected, it is recommended that you switch the Bluetooth function on your telephone off and then on again.
Select the name of the desired peripheral from the list and " Confirm ".
Enter a code of at least 4 figures for the connection then " Confirm ".
Enter this same code in the telephone then accept the connection.
The system offers to connect the telephone: - in " Telephone " (hands-free kit, telephone only),
- in " Audio streaming " (streaming: wireless playing of audio files from the telephone), - in " Internet " (internet browsing, only if your telephone is compatible with the "DUN" Dial-Up Networking Bluetooth standard). Select one or more profiles and confirm.

.
Audio and Telematics 73
The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you.
The ability of the system to connect with only one profile depends on the telephone. The two profiles may both connect by default.
Visit www.citroen.co.uk for more information (compatibility, additional help, ...).
The recognised telephone appears in the list.
Depending on your telephone, you may be asked to accept automatic connection every time the ignition is switched on.
On return to the vehicle, if the last telephone connected is present again, it is reconnected automatically and within around 30 seconds after switching on the ignition the pairing is done without any action on your part, with (Bluetooth activated). To modify the automatic connection mode, select the telephone in the list then select the desired profile.
Depending on the type of telephone, the system will ask you to accept or not the transfer of your contacts.
If not, select " Update ".
Connecting a Bluetooth ® Connecting a Bluetooth ® Connecting a Bluetooth
peripheral device
Automatic reconnection
On switching on the ignition, the telephone connected when the ignition was last switched off is automatically reconnected, if this connection mode had been activated during the pairing procedure.
The connection is confirmed by the display of a message and the name of the telephone.
Manual connection
Press on Telephone to display the primary page.
Press on the secondary page.
Select " Bluetooth " to display the list of paired peripherals.
Select the peripheral to connect.
Press on " Search ".
The connection is confirmed by the display of a message and the name of the telephone.