2014.5 Citroen C4 height

91
Front seats
Manual adjustments
Forwards-backwardsSeat heightSeat backrest angle
F Raise  the   control   and   slide   the   seat  f
or wards   or   backwards.
F
 
R
elease   the   control   to   lock   the   position.F
 P ull   the   control   upwards   to   raise   or   push  i
t   downwards   to   lower,   as   many   times   as  
n

ecessary,   to   obtain   the   position   required.F
 T urn   the   control   knob   to   adjust   the   seat  b
ackrest   angle.
As
  a   safety   measure,   seat   adjustments  
s

hould   only   be   done   when   stationary.
Before   moving   the   seat   backwards,   ensure   that   there   is   nothing   that   might   prevent   the   full  
t

ravel   of   the   seat,   so   as   to   avoid   the   risk   of   of   jamming   the   seat   caused   by   the   presence   of  
o

bjects   on   the   floor   behind   the   seat   or   rear   passengers.   If   the   seat   jams,   stop   the   movement  
i

mmediately.
4
Comfort

92
Driver's seat electric adjustments
Forwards-backwards
F Tilt  the   rear   part   of   the   control   upwards   or  d
ownwards   to   obtain   the   required   height.
F
 
T
ilt   the   front   part   of   the   control   upwards   or  
d

ownwards   to   obtain   the   required   angle.
Cushion height and angle
F Tilt  the   control   for wards   or   rear wards   to  a
djust   the   angle   of   the   seat   backrest.
Seat backrest angle
F Push  the   control   for wards   or   rear wards   to  s
lide   the   seat. Before
  moving   the   seat   backwards,   ensure   that   there   is   nothing   that   might   prevent   the   full  
t

ravel   of   the   seat,   so   as   to   avoid   the   risk   of   of   jamming   the   seat   caused   by   the   presence   of  
o

bjects   on   the   floor   behind   the   seat   or   rear   passengers.   If   the   seat   jams,   stop   the   movement  
i

mmediately.
The   electrical   functions   of   the   driver's   seat
 a

re   deactivated   approximately   one   minute
 a

fter   the   ignition   is   switched   off.
To   reactivate   them,   switch   on   the   ignition.
Comfort

93
Additional adjustments
Head restraint height and angle
F To  raise   a   head   restraint,   pull   it   upwards.
F  T o   lower   the   head   restraint,   press   the   lug   A
and
  the   head   restraint   at   the   same   time.
F
 
T
o   adjust   the   angle   of   the   head   restraint,   tilt  
i

ts   lower   part   for wards   or   rear wards.
Heated seats control
With the engine running, the front seats can be heated s eparately.
F
 
U
se   the   adjustment   dial,   placed   on   the   side  
o

f   each   front   seat,   to   switch   on   and   select  
t

he   level   of   heating   required:
0: O

f f.
1:

 
L
ow.
2:

  Medium.
3:

 
Hig
h.
Removing a head restraint
F To  remove   the   head   restraint,   press   the  l
ug A   and   pull   the   head   restraint   upwards.
F
 
T
o   put   the   head   restraint   back   in   place,  
e

ngage   the   head   restraint   stems   in   the  
o

penings   keeping   them   in   line   with   the   seat  
b

ack   and   press   the   lug   A   at   the   same   time.
The
 
head
 
restraint
 
is
 
fitted
 
with
 
a
 
frame
 
w

ith
 
notches
 
which
 
prevents
 
it
 
from
 
l

owering;
 
this
 
is
 
a
 
safety
 
device
 
in
 
case
 
o

f
 
impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head. Never
  drive   with   the   head   restraints  
r

emoved;   they   must   be   in   place   and  
adj

usted
 c
orrectly.
4
Comfort

99
Automatic day/night model
By means of a sensor, which measures the light   from   the   rear   of   the   vehicle,   this   system  
a

utomatically   and   progressively   changes  
b

etween   the   day   and   night   uses.
Steering wheel adjustment
F When stationary , pull the control lever to
release   the   adjustment   mechanism.
F
 
A
djust   the   height   and   reach   to   suit   your  
d

riving   position.
F
 
P
ush   the   control   lever   to   lock   the  
a

djustment
 m
echanism.
Rear view mirror
Manual day/night model
Adjustment
F Adjust  the   mirror   so   that   the   glass   is  
directed   correctly   in   the   "day"   position.
Day/night position
F Pull  the   lever   to   change   to   the   "night"   anti-
dazzle   position.
F
 
P
ush   the   lever   to   change   to   the  
normal
  "day"   position.
as a s
afety precaution, these
operations   should   only   be   carried   out  
w

ith   the   vehicle   stationary.
In   order   to   ensure   optimum   visibility  d
uring   your   manoeuvres,   the   mirror  l
ightens   automatically   when   reverse  
g

ear
 i
s
 enga
ged.
Adjustable
  mirror   providing   a   central   rear ward   view.
Equipped   with   an   anti-dazzle   system,   which   darkens   the   mirror   glass   and   reduces   the   nuisance   to  
t

he   driver   caused   by   the   sun,   headlamps   from   other   vehicles...
4
Comfort

106
Front armrest
Comfort and storage system for the driver and front passenger.
T he   height   and   length   of   the   armrest   cover   can   be   adjusted.
Height adjustment
F Raise  the   cover   to   the   required   position  (
low,   intermediate   or   high).
F
 
I
f   you   raise   the   cover   slightly   beyond   the  
h

igh   position,   guide   it   when   lowering   it   to  
t

he   low   position.
Longitudinal adjustment
F Slide  the   cover   fully   for wards   or   rear wards.
Storage
A storage space is arranged below the armrest c
over.   It   houses   the   back-up   reader   for   the  
e

lectronic   key   of   the   "Keyless   Entry   and  
S

tarting"   system,   if   the   vehicle   is   so   equipped.
F
 
Ra
ise
 t
he
 l
ever.
F
 
R
aise   the   cover   fully.
Fittings

122
To avoid causing a nuisance to other road users,   the   height   of   the   halogen   headlamps  
s

hould   be   adjusted   according   to   the   load   in   the  
v

ehicle.
0.
 1

  or   2   people   in   the   front   seats.
-.
 3

  people.
1.
 5

  people.
-.
 I

ntermediate
 s
etting.
2.
 5

  people   +   maximum   authorised   load.
-.
 I

ntermediate
 s
etting.
3.
 D

river   +   maximum   authorised   load.
Manual adjustment 
o
f   halogen  
h

eadlamps Automatic 
a djustment   of   xenon  
h

eadlamps
This system adjusts the height of the xenon headlamp   beams   automatically   and   when s

tationary,   according   to   the   load   in   the   vehicle,   so
 a

s   to   avoid   causing   a   nuisance   to   other   road   user.
If
  a   malfunction   occurs,   this   warning
 l

amp   is   displayed   in   the   instrument
 p

anel,   accompanied   by   an   audible
 s

ignal   and   a   message   in   the   screen.
The
  system   then   places   your
 h

eadlamps   in   the   lowest   position.
Do
  not   touch   the   xenon   bulbs.
Contact
  a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
The
 
initial
 
setting
 
is
 
position
 
"0" .
Visibility

142
ISOFIX child seats recommended by CITROËN
CITROËN offers a range of ISOFIX child seats listed and type approved for your vehicle.
R efer   also   to   the   child   seat   manufacturer's   fitting   instructions   for   information   on   installing   and   removing   the   seat.
"RÖMER Baby- Safe Plus" and its ISOFIX base
(size
  category:   E)
Group 0+: from bir th to 13 kg
Installed
  rear ward   facing   using   an   ISOFIX   base   which   is   attached   to   the   rings   A.
The
  base   has   a   support   leg,   adjustable   for   height,   which   sits   on   the   vehicle's   floor.
This
  child   seat   can   also   be   secured   with   a   seat   belt.   In   this   case,   only   the   shell   is   used   and  
a

ttached   to   the   vehicle's   seat   by   the   three-point   seat   belt.
Baby P2C Mini and its ISOFIX bas e
(size
 c

ategories:
 C
, D, E)
Group 0+: from bir th to 13 kg
Installed
  rear ward   facing   using   an   ISOFIX   base   which   is   attached   to   the   anchorage   rings   A.
The
  base   has   a   support   leg,   adjustable   for   height,   which   sits   on   the   vehicle's   floor.
This
  seat   can   also   be   secured   with   a   seat   belt.  
In
  this   case   only   the   seat   shell   is   used.
Child safety

143
"RÖMER Duo Plus ISOFIX "
(size   category   B1)
Group 1: from 9 to 18 kg
Installed
  only   in   the   for ward   facing   position.
Attached
 
to
 
the   rings   A,
  as   well   as   the   ring   B,
  referred   to   as   the   TOP   TETHER,   using   an   upper   strap.
Three
  seat   body   angles:   sitting,   reclining,   lying.
This
 
child   seat   can   also   be   used   on   seats   which   are   not   fitted   with   ISOFIX   mountings.  
In
 
this   case,   it   must   be   attached   to   the   vehicle   seat   using   the   three   point   seat   belt.
Baby P2C Midi and its ISOFIX base (size
 c

ategories:
 D
, C, A, B, B1)
Group 1: from 9 to 18 kg
Installed
  rear ward   facing   using   an   ISOFIX   base   which   is   attached   to   the   rings   A.
The
 
base   includes   a   support   leg,   adjustable   for   height,   which   rests   on   the   vehicle's   floor.
This
  child   seat   can   also   be   used   for ward   facing.
This
  child   seat   can not
 

be   secured   with   a   seat   belt.
We
  recommend   that   it   be   used   rear ward   facing   up   to   3   years.
7
Child safety