Technical data
Checks
Practical
i
nformation
Driving recommendations 1 59
Starting-switching off the engine
with
the key
1
60
Starting-switching
off the engine with the
"
Keyless Entry and Starting" system
1
63
Electric
parking brake
1
67
Manual
par
king
b
rake
1
74
Manual
g
earbox
1
75
Electronic
gearbox
1
76
Automatic
gearbox
1
80
Hill
start assist
1
85
Gear
ef ficiency indicator
1
86
Tyre
under-inflation detection
1
87
Stop
& Start
1
89
Blind
spot sensors
1
92
Memorising
speeds
1
95
Speed
limiter
1
97
Cruise
control
1
99
Parking
sensors
2
01
Driving
Emergency or assistance 283
7-inch touch screen tablet 2 85
Audio
system
3
55
Audio and telematics
Alphabetical
in
dex
Fuel tank 2 04
Misfuel prevention (Diesel) 2 06
Running
out of fuel (Diesel)
2
07
Bonnet
20
8
Petrol
engines
2
09
Diesel
engines
2
10
Checking
levels
2
11
Checks
2
15
AdBlue
® additive and SCR system (
BlueHDi Diesel) 2 17
Temporary
puncture repair kit
2
25
Changing
a wheel
2
30
Snow
chains
2
37
Changing
a bulb
2
38
Changing
a fuse
2
47
12
V
battery
2
52
Energy
economy mode
2
56
Changing
a wiper blade
2
57
Fitting
roof bars
2
58
Very
cold climate screen
2
58
Towing
the vehicle
2
59
Towing
a trailer
2
61
Towbar
with quickly detachable towball
2
63
Audio
pre-equipment
2
68
Accessories
2
69Petrol
engines
2
71
Petrol weights
2
73
Diesel engines
2
75
Diesel weights
2
77
Dimensions
2
80
Identification
ma
rkings
2
81
Contents
122
To avoid causing a nuisance to other road users, the height of the halogen headlamps
s
hould be adjusted according to the load in the
v
ehicle.
0.
1
or 2 people in the front seats.
-.
3
people.
1.
5
people.
-.
I
ntermediate
s
etting.
2.
5
people + maximum authorised load.
-.
I
ntermediate
s
etting.
3.
D
river + maximum authorised load.
Manual adjustment
o
f halogen
h
eadlamps Automatic
a djustment of xenon
h
eadlamps
This system adjusts the height of the xenon headlamp beams automatically and when s
tationary, according to the load in the vehicle, so
a
s to avoid causing a nuisance to other road user.
If
a malfunction occurs, this warning
l
amp is displayed in the instrument
p
anel, accompanied by an audible
s
ignal and a message in the screen.
The
system then places your
h
eadlamps in the lowest position.
Do
not touch the xenon bulbs.
Contact
a CITROËN dealer or a
q
ualified
w
orkshop.
The
initial
setting
is
position
"0" .
Visibility
238
Changing a bulb
The headlamps are fitted with polycarbonate glass with a protective
c
oating:
F
d
o not clean them using a dr y
or abrasive cloth, nor with a
detergent or solvent product,
F
u
se a sponge and soapy water or a
p
H neutral product,
F
w
hen using a high pressure washer
o
n persistent marks, do not keep
t
he lance directed towards the
l
amps or their edges for too long,
s
o as not to damage their protective
c
oating
a
nd
sea
ls.
Changing
a bulb should only be done
a
fter the headlamp has been switched
o
ff for several minutes (risk of serious
b
urns).
F
D
o not touch the bulb directly with
y
our fingers, use a lint-free cloth.
It
is imperative to use only anti-
ultraviolet
(UV) type bulbs to avoid
d
amaging
t
he
h
eadlamp.
Always
replace a failed bulb with a
n
ew bulb with the same type and
s
pecification.Front lamps
Model with xenon and directional
headlamps
1. Directional dipped / main beam headlamps (D1S).
2.
D
irection indicators (PY21W amber).
3.
D
aytime running lamps / sidelamps
(P21/5W XL).
4.
F
o g l a m p s ( H11) .
Risk of electrocution
Xenon bulbs (D1S) must be replaced by a CITROËN dealer or a qualified
w
orkshop.
Practical information
239
F Remove the air deflector by unclipping e
ach of its three attachment points.
F
U
nclip the bonnet release cable at its
two
fixings.
F
M
ove the cable down.
After
changing the failed bulb, remember to
p
ut everything back in place (cable and air
d
eflector).
Depending
on the engine and only on the left
h
and side, you must first carry out the following
o
perations for access to the protective covers
on the bulbs.
Access to bulbs
Model with halogen headlamps
and LED light signature* (type 2)
1. Direction indicators (LEDs).
2. Daytime running lamps / sidelamps (LEDs).3. Dipped beam headlamps (H7).
4. M
ain beam headlamps (H7).
5.
F
o g l a m p s ( H11) .
Bulbs
with lugs, type H1, H7... take care
t
o position them correctly to ensure the
b
est
l
ighting.
Model with halogen headlamps
(t y p e 1)
1. Direction indicators (H21 clear).
2. Dipped beam headlamps (H7).
3.
M
ain beam headlamps (H1).
4.
D
aytime running lamps / sidelamps
(P21/5W XL).
5.
F
o g l a m p s ( H11) .Bulbs
with lugs, type H1, H7... take care
t
o position them correctly to ensure the
b
est
l
ighting.
*
LED: light emitting diodes.
11
Practical information
240
Changing direction indicator
bulbs
Model with halogen headlamps (type 1)
F T urn the bulb holder a quarter of a turn and
p
ull it out.
F
P
ull the bulb out and change it.
To
reassemble, carry out these operations in
r
everse
o
rder. Model with Xenon headlamps
F
R
emove the protective cover by pulling its
t
ongue.
F
T
urn the bulb holder a quarter of a turn and
p
ull it out.
F T urn the bulb a quarter of a turn and c
hange it .
To
reassemble, carry out these operations in
r
everse
o
rder.
Amber
coloured bulbs, such as the
d
irection indicators, must be replaced
w
ith bulbs of identical specifications
a
nd colour.
Rapid
flashing of the direction indicator
w
arning lamp (right or left) indicates the
f
ailure of a bulb on that side.
Model with halogen headlamps (type 2)
For the replacement of this type of LED lamp,
c
ontact a CITROËN dealer or a qualified
w
orkshop.
Practical information
241
Changing main beam headlamp
bulbs (on models with
type
1
halogen headlamps)
F Remove the protective cover by pulling the t
ab.
F
D
isconnect the connector.
F
S
queeze the springs to release the bulb.
F
P
ull the bulb out and change it.
To
reassemble, carry out these operations in
r
everse
o
rder.
Changing main beam headlamp
bulbs (on models with
type
2
halogen headlamps)
F Remove the protective cover by pulling the t
ab.
F
D
isconnect the connector.
F
P
ull the bulb out and change it.
To
reassemble, carry out these operations in
r
everse
o
rder.
Changing dipped beam headlamp
bulbs (on models with halogen
headlamps)
F Remove the protective cover by pulling the t
ab.
F
D
isconnect the connector.
F
S
pread the springs to release the bulb.
F
P
ull the bulb out and change it.
To
reassemble, carry out these operations in
r
everse
o
rder.
When
refitting, close the protective
c
over carefully to preserve the sealing
o
f the headlamp.
11
Practical information
242
Changing daytime running lamp /
s idelamp bulbs (on models
with xenon or type 1 halogen
headlamps)
F Remove the protective cover by pulling the t
ab.
F
D
isconnect the bulb connector.
F
T
urn the bulb holder a quarter of a turn and
p
ull it out
F
P
ull the bulb out and change it.
To refit, carry out these operations in reverse
o r d e r.
Changing daytime running
lamps / sidelamps (on models
with type
2 halogen headlamps)
For the replacement of this type of LED lamp, contact a CITROËN dealer or a qualified
w
orkshop.
Practical information
243
Changing foglamp bulbs
F Introduce a flat screwdriver in the hole in t
he f inisher.
F
P
ull and lever to unclip the bumper finisher
(
the parking sensor stays with the finisher).
F
R
emove the two module fixing screws and
r
emove it from its housing.
F
D
isconnect the bulb holder connector.
F
T
urn the bulb holder a quarter of a turn and
e
xtract it.
F
P
ull the bulb and change it.
To refit, carry out these operations in reverse
o r d e r.
To
replace these bulbs you may also contact a
C
ITROËN dealer or a qualified workshop.
Changing the side spotlamps
(LEDs)
For the replacement of this type of light emitting diode lamp, contact a CITROËN dealer or a
q
ualified
w
orkshop.
Changing integrated direction
indicator side repeaters
F Insert a flat screwdriver towards the centre o
f the repeater between the repeater and
t
he base of the mirror.
F
T
ilt the flat screwdriver to extract the
r
epeater and remove it.
F
D
isconnect the repeater connector.
To
reassemble, carry out these operations in
r
everse
o
rder.
Contact
a CITROËN dealer or a qualified
w
orkshop to obtain replacement repeaters.
11
Practical information