2014.5 Citroen C4 CACTUS RHD cooling

17
Warning lamps
When the engine is running or the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires action on the   part   of   the   driver.
Any
  fault   resulting   in   the   illumination   of   a   warning   lamp   must   be   investigated   further   using   the   associated   message.
If
  you   encounter   any   problems,   contact   a   CITROËN   dealer   or   a   qualified   workshop.
STOP fixed,
  associated   with  
a

nother   warning   lamp,  
a

ccompanied   by   an  
a

udible   signal   and  
a m

essage.Illumination
  of   this   warning   lamp   is  
r

elated   to   a   serious   fault   detected  
w

ith   the   braking   or   power   steering  
s

ystems,   the   electrical   system,   or  
w

ith   engine   lubrication   or   cooling   or  
a pu

ncture.Stop
  as   soon   as   it   is   safe   to   do   so   as   the   engine   may  
c

ut   out.
Park,
  switch   off   the   ignition   and   call   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Warning / indicator lamp
StateCause Action / Observations
Service on
  temporarily,  
a

ccompanied   by  
a m

essage.One
  or   more   minor   faults   for   which  
t

here   is   no   specific   warning   lamp  
h

ave   been   detected.Identify
  the   cause   of   the   fault   using   the   message  
d

isplayed   in   the   screen.
You
  can   deal   with   some   problems   yourself,   such   as   a  
d

oor   open   or   the   start   of   saturation   of   the   particle   filter  
(

as   soon   as   the   traffic   conditions   allow,   regenerate  
t

he   filter   by   driving   at   a   speed   of   at   least   40   mph  
(

60 km/h),   until   the   warning   lamp   goes   off).
For
  any   other   problems,   such   as   a   fault   with   the   tyre  
u

nder   inflation   detection   system,   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop.
fixed,
  accompanied   by  
a

  message.One
  or   more   major   faults   for   which  
t

here   is   no   specific   warning   lamp  
h

ave   been   detected.Identify
  the   cause   of   the   fault   using   the   message  
d

isplayed   in   the   screen;   you   must   then   contact  
a C

ITROËN   dealer   or   a   qualified   workshop.
fixed, associated with the flashing   and   then   fixed d

isplay   of   the   service
 in

dicator
 span
ner.The servicing interval has been exceeded. Only
  on   BlueHDi   Diesel   versions.
Your   vehicle   must   be   serviced   as   soon   as   possible.
1
Monitoring

22
Engine oil
pressurefixed.
There   is   a   fault   with   the   engine  l
ubrication   system.You
  must   stop   as   soon   it   is   safe   to   do   so.
Park,   switch   off   the   ignition   and   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Battery charge
fixed. The   battery   charging   circuit   has   a  
f

ault   (dirty   or   loose   terminals,   slack   or  
c

ut   alternator   belt,   ...).
The   warning   lamp   should   go   off   when   the   engine   is  
s

tarted.
If   it   does   not   go   off,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Maximum
coolant
temperature fixed.
The   temperature   of   the   cooling  
s

ystem   is   too   high.
Stop   as   soon   as   it   is   safe   to   do   so.
Wait   until   the   engine   has   cooled   down   before   topping  
u

p   the   level,   if   necessary.
If   the   problem   persists,   contact   a   CITROËN   dealer   or  
q

ualified
 w
orkshop.
Warning / indicator lamp
StateCause Action / Observations
Monitoring

57
Ventilation
Air intake
The air circulating in the passenger compartment   is   filtered   and   originates   either  
f

rom   the   outside   via   the   grille   located   at   the  
b

ase   of   the   windscreen   or   from   the   inside   in   air  
re

circulation
 m
ode.
Air treatment
The incoming air follows various routes depending   on   the   controls   selected   by   the  
d

river:
-
 
d
irect   arrival   in   the   passenger  
c

ompartment   (air   intake),
-
 
p
assage   through   a   heating   circuit   (heating),
-
 
p
assage   through   a   cooling   circuit   (air  
c

onditioning).
Control panel
1. Windscreen d emisting-defrosting v ents.
2. F ront   side   window   demisting/defrosting  
ve

nts.
3.
 A

djustable   side   air   vent   (driver   only).4. C
entral   adjustable   air   vents.
5. A ir   outlets   for   the   front   footwells.
6.
 A

ir   outlets   for   the   rear   footwells.
Air distribution
The controls of this system are accessible in the " Air conditioning "
menu
  of   the   touch   screen   tablet   A.
The
 
demisting/defrosting   controls   for   the  
w

indscreen   and   rear   screen   are   located   below  
t

he
 
touch
 
screen   tablet.
3
Comfort

66
Avoid the prolonged use of interior air   recirculation   (risk   of   misting   and  
d

eterioration   of   air   quality).
It
 
allows
 
you:
-
 
i

n
 
summer,
 
to
 
lower
 
the
 
temperature,
-
 
i

n
 
winter,
 
above
 
3
 
°C,
 
to
 
improve
 
demisting.
F
 P
ress
 
this
 
button
 
again
 
to
 
switch
 
o

ff
 
the
 
air
 
conditioning.
F

P

ress this button to switch on the
air
 c

onditioning.
Air conditioning On/Off
The air conditioning is designed to operate e
fficiently   in   all   seasons,   with   the   windows  
c

losed. The
  intake   of   exterior   air   avoids   and   eliminated  m
isting   of   the   windscreen   and   side   windows.
Air intake/Air recirculation
The recirculation of interior air prevents exterior o
dours   and   smoke   from   entering   the   passenger  
c

ompartment.
F

P
ress this button to recirculate
the
  interior   air.
F
 
P
ress   this   button   again   to   allow  
t

he   intake   of   exterior   air.
The
 
air
 
conditioning
 
cannot
 
operate
 
w

hen
 
the
 
air
 
flow
 
is
 
set
 
to
 
off. This
  function   also   allows   faster   heating  
o

r   cooling   of   the   air   in   the   passenger  
c

ompartment.
Ventilation with "ignition on"
function
With the ignition on, you can use the ventilation   system   and   have   access   to   the  
"A

ir conditioning "
  menu   to   adjust   the   air
flow
 

and   air distribution
 
in   the   passenger  
c

ompartment.
This
  function   is   available   for   a   few   minutes,  
d

epending   on   the   state   of   charge   of   the   battery  
o

f   your   vehicle.
This
  function   does   not   activate   the   air  
c

onditioning.
You
  can   make   use   of   the   residual   heat   in   the  
e

ngine   to   warm   the   passenger   compartment  
u

sing   the   temperature   setting   buttons.
Switching on
Switching off
Comfort

196
Engine compartment fuses
Access to the fuses
F Unclip  the   cover.
F  C hange   the   fuse   (see   corresponding  
par

agraph).
F
 
W
hen   you   have   finished,   close   the   cover  
c

arefully   to   ensure   correct   sealing   of   the  
f

usebox. Fuse
N° Rating
(A) Functions
F1 40Air
 c
onditioning.
F2 30 / 40Stop   &   Start.
F3 30Passenger
 c
ompartment
 f
usebox.
F4 70Passenger
 c
ompartment
 f
usebox.
F5 70Built-in   Systems   Inter face   (BSI).
F6 60Cooling   fan   assembly.
F7 80Built-in   Systems   Inter face   (BSI).
F8 15Engine
  management,   petrol   pump.
F9 15Engine
 m

anagement.
F10 15Engine
 m

anagement.
F11 20Engine
 m

anagement.
F12 5Cooling
  fan   assembly.
F13 5Built-in
  Systems   Inter face   (BSI).
F14 5Battery
  charge   unit   (non   Stop   &   Start   engine).
F15 5Stop
  &   Start.
F17 5Built-in
  Systems   Inter face   (BSI).
F18 10Right
  hand   main   beam   headlamp.
The
  fusebox   is   placed   in   the   engine  
c

ompartment   near   the   battery.
Practical information

207
Driving advice
Distribution of loads
F Distribute  the   load   in   the   trailer   so   that  t
he heaviest   items   are   as   close   as  
p

ossible   to   the   axle   and   the   nose   weight  
a

pproaches   the   maximum   permitted  
w

ithout   exceeding   it.
Air
  density   decreases   with   altitude,   thus  
r

educing   engine   per formance.   Above  
1 0

00 metres,   the   maximum   towed   load   must  
b

e   reduced   by   10 %   for   every   1 000   metres   of  
al

titude.
Side wind
F Take   into   account   the   increased   sensitivity  t
o   side   wind.
Cooling
Towing a trailer on a slope increases the temperature   of   the   coolant.
As
  the   fan   is   electrically   controlled,   its   cooling  
c

apacity   is   not   dependent   on   the   engine   speed.
F
 
T
o   lower   the   engine   speed,   reduce   your  
s

peed.
The
  maximum   towed   load   on   a   long   incline  
d

epends   on   the   gradient   and   the   ambient  
t

emperature.
In
  all   cases,   keep   a   check   on   the   coolant  
t

emperature. F
 
I
f   the   warning   lamp   and   the  
S

TOP
 
warning   lamp   come   on,  
s

top   the   vehicle   and   switch   off  
t

he   engine   as   soon   as   possible.
Braking
Towing a trailer increases the braking distance.
T o   avoid   overheating   of   the   brakes   on   a   long  
m

ountain   type   of   descent,   the   use   of   engine  
b

raking   is   recommended.
Ty r e s
F Check   the   tyre   pressures   of   the   towing  v
ehicle   and   of   the   trailer,   observing   the  
re

commended
 p
ressures.
Lighting
F Check  the   electrical   lighting   and   signalling  o
n   the   trailer.
Refer
 
to
 
the
 
"Technical
 
data"
 
section
 
for
 
details
 
o

f
 
the
 
weights
 
and
 
towed
 
loads
 
which
 
apply
 
to
 
y

our
 
vehicle.
When
 
not
 
towing
 
a
 
trailer,
 
remove
 
the
 
q

uickly-detachable
 
tow
 
ball
 
before
 
d

riving. The
  rear   parking   sensors   will   be  
d

eactivated   automatically   if   a   genuine  
C

ITROËN   towbar   is   used.
9
Practical information

210
Very cold climate screens
Removable protective screens which prevents the accumulation of snow at the radiator cooling fan.
F  
O
ffer   up   the   corresponding   screen   to   the  
f

ront   bumper   upper   grille.
F
 
P
ress   on   the   edge   to   engage   its   fixing   clips  
i

n   turn.
Proceed
  in   the   same   way   for   the   screen   on   the  
l

ower   grille.F
 
U
sing   a   screwdriver,   lever   in   turn   on   the  
f

ixings   of   each   screen   to   unclip   them.
Do
  not   forget   to   remove   the   very   cold  
c

limate   screens   when:
-
 
t
he   ambient   temperature   exceeds  
1

0°   C,
-
 tow

ing,
-
 a

t   speeds   above   75   mph   (120   km/h).
Removal
Fitting
Before fitting or removing a screen, e
nsure   that   the   engine   is   off   and   the  
c

ooling   fan   has   stopped.
It
  is   recommended   that   the   screens  
b

e   fitted   and   removed   by   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Practical information

216
bonnet
F Open  the   left   hand   front   door. The location of the interior bonnet
release
  lever   prevents   opening   of   the  
b

onnet   when   the   left   hand   front   door  
i

s   shut.
When   the   engine   is   hot,   handle   the  
e

xterior   safety   catch   and   the   stay   with  
c

are   (risk   of   burns),   using   the   protected  
a

rea.
When   the   bonnet   is   open,   take   care   not  
t

o   damage   the   safety   catch.
F  
L
ift   the   safety   catch   and   raise   the   bonnet.F
 
U
nclip   the   stay   from   its   housing   and   place  i
t   in   the   support   slot   to   hold   the   bonnet  ope
n.
Opening
F Pull  the   release   lever,   located   at   the   bottom  o
f   the   door   aperture,   towards   you.
The cooling fan may star t after
switching off the engine: take care
with articles and clothing that might
be caught by the fan blades.
Do
  not   open   the   bonnet   under   very  
wi

ndy
 c
onditions.
Closing
F Take  the   stay   out   of   its   support   slot.
F  C lip   the   stay   back   into   its   housing.
F
 
L
ower   the   bonnet   and   release   it   at   the   end  
o

f   its   travel.
F
 
P
ull   on   the   bonnet   to   check   that   it   has  
l

atched   correctly.
be

cause of the presence of electrical
equipment
  under   the   bonnet,   it   is  
r

ecommended   that   exposure   to   water  
(

rain,   washing,   ...)   be   limited.
Before
  doing   anything   under   the  
b

onnet, switch off the Stop & Start
system   to   avoid   any   risk   of   injury  
r

esulting   from   an   automatic   change   to  S
TART   mode.
Checks