2014.5 Citroen C ZERO bulb

.
.
Direction indicators 56
Automatic operation of brake lamps
5
6
Hazard warning lamps

5
6
Horn

5
7
Emergency or assistance call

5
7
Under-inflation detection
5

8
Braking assistance systems

6
2
Trajectory control systems

6
4
Front seat belts

6
5
Airbags
6

8
Safety
Child seats 72
Deactivating the passenger's front airbag
7
5
ISOFIX child seats

8
1
Child lock

8
4
Child safety
Charging the main battery 8 5
Ancillaries battery
9
3
Temporary puncture
repair kit

9
7
Changing a wheel

1
01
Snow chains

1
05
Changing a bulb

1
06
Changing a fuse

1
14
Changing a wiper blade

1
19
Towing the vehicle

1
19
Precautions for washing

1
20
Accessories
1

20
Practical information
Bonnet 123
Front compartment
1
24
Rear compartment

1
25
Checking levels

1
26
Chec ks
12

8
Checks
Motor and main battery 129
Weights
13
0
Dimensions
1

31
Identification markings
1

32
Technical data
Emergency or assistance 133
Audio system / Bluetooth
1
35
Audio and telematics
Visual search
Alphabetical index
Contents

53
Daytime running lamps
Special daytime lighting so that the vehicle can
be seen more easily.
The daytime running lamps come on
automatically when starting the motor, if no
other lighting is on.
They cannot be deactivated.Automatic illumination of headlamps
With the main lighting control ring in the AUTO
position, the sidelamps and dipped beam headlamps
come on automatically, without any action by the
driver, when a low level of ambient light is detected.
When the light returns to a sufficient level or the
wipers are switched off, the lighting is switched off
automatically.
The sensor is located at the base of the windscreen.
Automatic illumination of
headlamps
Automatic lighting off
When the lighting stalk is in the
"AUTO" position, if the ignition switch is in
the "LOCK" or "ACC" position or if the key
has been removed, the lighting switches off
automatically when the driver's door is
opened . The initial setting is position "0"
.
Headlamp
adjustment
To avoid causing a nuisance to other road
users, the height of the halogen headlamps
should be adjusted according to the load in
the
vehicle.
0.
D

river only or driver + 1 front passenger.
1 or 2.

4 p
eople (including the driver).
3.
4 p

eople (including the driver) + maximum
authorised load.
4.
D

river + maximum authorised load.
Although these lamps are located in
the same unit as the front foglamp, they
operate with a specific bulb.
Their use is covered by road vehicle
lighting regulations.
In foggy weather or in snow, the
sunshine sensor may detect sufficient
light. The lighting will not come on
automatically.
do n

ot cover the sunshine sensor, the
associated functions will no longer be
controlled.
5
Visibility

106
Changing a bulb
1. Direction indicators (W21W - 21 W).
2. S idelamps (W5W - 5 W).
3.
M

ain beam headlamps (HB3 - 60 W).
4.
D

ipped beam headlamps (H11 - 55 W) .
The headlamps are fitted with
polycarbonate glass with a protective
coating:
F

d

o not clean them using a dr y
or abrasive cloth, nor with a
detergent or solvent product,
F

u

se a sponge and soapy water or a
pH neutral product,
F

w

hen using a high pressure washer
on persistent marks, do not keep
the lance directed towards the
lamps or their edges for too long,
so as not to damage their protective
coating and seals.
Changing a bulb should only be done
after the headlamp has been switched
off for several minutes (risk of serious
burns).
F

D

o not touch the bulb directly with
your fingers, use a lint-free cloth.
It is imperative to use only anti-
ultraviolet (UV) type bulbs to avoid
damaging the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specification.
Front lamps
5. Front foglamps (H8 - 35 W).
6. D aytime running lamps
(P13W - 13 W).
Practical information

107
F Lift the cover B, using a screwdriver
protected by a cloth.
F

S
lacken fixing screw C until the head of the
screw touches the trim. F
R emove the bumper retaining clips, using
a screwdriver.
F

C
arefully lift the bumper.
To replace a failed bulb, you must first remove
the lamp.
To remove the lamp:
F

O

pen the bonnet.
F

P

ress tab A to release the connector.
Access to bulbs
8
Practical information

109
Changing sidelamp bulbs
F Turn the bulb holder to the left and pull it out.
F

P
ull the bulb out and and change it.
To reassemble, carry out these operations in
reverse order.
Changing main beam headlamp
bulbs
F Turn the bulb holder to the left and pull it out.
F

R
emove the bulb by pressing on the tongue.
F

C
hange the bulb.
For reassembly, carry out these operations in
reverse order.
Changing direction indicator
bulbs
F Turn the bulb holder to the left and pull it out.
F

P
ull the bulb out and change it.
To refit, carry out these operations in reverse
o r d e r.
Amber coloured bulbs must be replaced
with bulbs of identical specifications
and colour.
8
Practical information

110
Changing dipped beam headlamp
bulbs
F Turn the bulb holder to the left and pull it out.
F

R
emove the bulb by pressing on the tongue.
F

C
hange the bulb.
To refit, carry out these operations in reverse
o r d e r.
Changing front foglamp bulbs /
daytime running lamp bulbs
F Put the front wheels onto full lock, to facilitate access.
F

R
emove the clips securing the protective
covers on the bulb holders.
F

M
ove the cover aside. F
T urn the bulb holder (A for the front fog
lamp, B for the daytime running lamp) to
the left and pull it out.
F

P
ull the bulb out and change it.
To reassemble, carry out these operations in
reverse order.
Practical information

111
1. Brake lamps / Sidelamps
(21 W / 15 W or LEDs).
2.
D

irection indicators (W Y21W - 21 W).
3.
R

eversing lamps (W21W - 21 W).
Rear lamps
Amber coloured bulbs, such as the
direction indicators, must be replaced
with bulbs of identical specification and
c o l o u r.
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal sur face of the
glass of the headlamps and rear lamps
is normal; it disappears after the lamps
have been on for a few minutes.
Changing integrated direction
indicator side repeater bulbs
(WY5W - 5
W)
F Push the repeater towards the rear and disengage it.
F

T
urn the bulb holder to the left and pull it
out.
F

P
ull the bulb out and change it.
To reassemble, carry out these operations in
reverse order.
Access to bulbs
F Remove the two screws.
F Disengage the lamp unit by pulling it towards you.
8
Practical information

112
Changing a direction indicator
bulb
Changing brake lamp

/ sidelamp
LEDs
All work on the LED lamps must be carried out
by a CITROËN dealer or qualified workshop.
Changing a reversing lamp bulb
Changing brake lamp

/ sidelamp
bulbs (21 W

/ 15 W)
F Turn the bulb holder to the left and pull it
out.
F

P
ull out the bulb and change it.
To refit, carry out these operations in reverse
o r d e r. F
T urn the bulb holder to the left and pull it
out.
F

P
ull the bulb out and replace it.
To refit, carry out these operations in reverse
o r d e r. F
T urn the bulb holder to the left and pull it
out.
F

P
ull the bulb out and replace it.
To refit, carry out these operations in reverse
o r d e r.
Practical information