2-9
MAINTENANCE SPECIFICATIONS
CHASSISItem Standard Limit
Steering system: Steering bearing type Taper roller bearing ----
Front suspension: USA, CDN EUROPE, AUS, NZ, ZA Front fork travel 310 mm (12.2 in) ←----
Fork spring free length 470.0 mm (18.5 in) ←465.0 mm
(18.3 in)
Spring rate, STD K = 4.6 N/mm (0.469 kg/ mm, 26.3 lb/in)←
----
Optional spring Yes← ----
Oil capacity 551 cm
3 (19.4 lmp oz,
18.63 US oz) ←
----
Oil grade Suspension oil "S1"←----
Inner tube outer diameter 48 mm (1.89 in)← ----
Front fork top end 0 mm (0 in)←----
Rear suspension: USA, CDN EUROPE, AUS, NZ, ZA
Shock absorber travel 132.0 mm (5.20 in)←----
Spring free length 260.0 mm (10.24 in)←254.8 mm
(10.03 in)
Fitting length 250.0 mm (9.84 in) 246.0 mm (9.69 in) ----
Preload length
1.5–18 mm (0.06–0.71
in) ←
Spring rate, STD K = 56.0 N/mm (5.7 kg/
mm, 319.2 lb/in) K = 54.0 N/mm (5.5 kg/
mm, 308.0 lb/in)----
Optional spring Yes← ----
Enclosed gas pressure 1,000 kPa (10 kg/cm
2,
142 psi) ←
----
Swingarm: Swingarm free play limitEnd ---- 1.0 mm (0.04 in)
Wheel: Front wheel type Spoke wheel ----
Rear wheel type Spoke wheel ----
Front rim size/materia l 21 × 1.60/Aluminum ----
Rear rim size/materia l 19 × 2.15/Aluminum ----
Rim runout limit: Radial ---- 2.0 mm (0.08 in)
Lateral ---- 2.0 mm (0.08 in)
Drive chain: Type/manufacturer DID5 20DMA2 SDH/DAIDO ----
Number of links 113 links + joint ----
Chain slack 50–60 mm (2.0–2.4 in) ----
Chain length (15 links) ---- 242.9 mm (9.563 in)
