TP 14946 (Usa & Canada) a T 1220. Printed in s weden, göteborg 2012, Copyright © 2000-2012 v olvo Car Corporation
enterIng the rear seat
MaNUal seaT
moving the seat forward
1. remove the seat belt from the guide (a).
2. Pull up the handle (b) and fold the backrest
forward until it locks in position.
3. Move the seat forward (C).
m oving the seat rearward
1. Move the seat rearward until it reaches the
desired position (d).
2. Pull up the handle (e) and return the back-
rest to the upright position.
3. Put the seat belt back into the guide (F).
PoWer seaT*
m oving the seat forward
1. remove the seat belt from the guide (a).
2. Pull up the handle (b) and fold the backrest
forward until it locks in position.
3. Press and hold in the front section of the
button (g).
m oving the seat rearward
1. Press and hold in the rear section of the
button (g).
2. Pull up the handle (e) and return the back-
rest to the upright position.
3. Put the seat belt back into the guide (F).
note
When putting on the seat belt, it is easiest
to reach for the lower section of the belt,
near the guide, instead of reaching over
your shoulder.
adjustIng the Front seat
1
lumbar support.
2 head restraint height adjustment.
3 access to rear seat.
4 backrest tilt.
5 raise/lower the seat.
6 raise/lower the front edge of the seat
cushion.
7 Forward/rearward.
r emote key and the power seat
each of the remote keys can be used by
different drivers to store the driver’s seat posi-
tion in the following way:
• adjust the seat to your preferences.
• lock the vehicle by pressing the lock but-
ton on the remote key that you normally
use. This stores the seat’s current position
in that remote key’s memory
a.
• Unlock the vehicle (by pressing the unlock
button on the same remote key) and open
the driver’s door. The driver’s seat will
automatically move to the position stored
in the remote key (if the seat has been
moved since you left it).
a. This setting does not affect the separate power seat mem-
ory. Consult your owner’s manual for detailed information.
