
 
not always be able to help you master situations where there is a sudden change in the coefficient of 
friction of the road surface. When there is a section of dry road that is suddenly covered with water, 
slush or snow, ESC cannot perform the same way it would on a dry surface. If the vehicle 
“hydroplanes” (rides on a cushion of water instead of the road surface), ESC will not be able to help 
you steer the vehicle because contact with the pavement has been interrupted and the vehicle cannot 
be braked or steered. During fast cornering, particularly on winding roads, ESC cannot always deal as 
effectively with difficult driving situations as it can at lower speeds. When towing a trailer, ESC is not 
able to help you regain control as it would if you were not towing a trailer. 
Always adjust your speed and driving style to visibility, road, traffic, and weather conditions. ESC 
cannot override the vehicle's physical limits, increase the available traction, or keep a vehicle on the 
road if road departure is a result of driver inattention. Instead, ESC improves the possibility of keeping 
the vehicle under control and on the road during extreme maneuvers by using the driver's steering 
inputs to help keep the vehicle going in the intended direction. If you are traveling at a speed that 
causes you to run off the road before ESC can provide any assistance, you may not experience the 
benefits of ESC. 
ESC includes and/or works together with the ABS, BAS, ASR, EDL, and XDL systems (see below). 
ESC is switched on all the time and cannot be switched off. 
Anti-Lock Brake System (ABS) 
ABS helps to keep the wheels from locking up and helps to maintain the driver's ability to steer and 
control the vehicle. This means the vehicle is less likely to skid, even during hard braking: 
 x Push the brake pedal down hard and hold it there. Don't take your foot off the pedal or reduce the 
force on the pedal! 
 x Do not “pump” the brake pedal or let up on it! 
 x Steer the vehicle while pushing down hard on the brake pedal. 
 x ABS stops working if you release or let up on the brake. 
When ABS is doing its job, you will notice a slight vibration through the brake pedal and hear a 
noise. ABS cannot shorten the stopping distance under all conditions. The stopping distance may 
even be longer, for instance, when driving on gravel or on newly fallen snow covering an icy or 
slippery surface. 
Brake Assist (BAS) 
The Brake Assist System can help to reduce stopping distances. If you press the brake pedal very 
quickly, BAS detects an emergency situation. It then very quickly builds up full brake system pressure, 
maximizing braking power and reducing the stopping distance. This way, ABS can be activated more 
quickly and efficiently. 
Do not reduce pressure on the brake pedal! BAS switches off automatically as soon as you release or 
let up on the brake. 
Anti-Slip Regulation (ASR) 
ASR reduces engine power directed to spinning wheels and adjusts power to the road conditions. 
Even under poor road conditions, ASR can make it easier to get moving, accelerate, and climb hills. 
ESC and ASR can help when driving on loose surfaces (such as gravel) and in deep snow. If you get 
stuck in deep snow, you may be able to get going again by “rocking” the vehicle back and forth. ESC 
and ASR recognize this special driving situation and automatically increase the speed of the front 
wheels. Keep pressing the accelerator and let ESC increase the speed of the front wheels to help you 
keep moving or get moving again. 
Electronic Differential Lock (EDL and XDL) 
EDL is applied during regular straight-line acceleration. EDL gently brakes a drive wheel that has lost 
traction (spinning) and redirects the drive force to other drive wheels. In extreme cases, EDL 
automatically switches off to keep the brake from overheating. As soon as the brake has cooled down, 
EDL automatically switches on again.  

 
On some vehicles, engine components block the view of the brake fluid reservoir and make it 
impossible to see the brake fluid level. If you cannot clearly see the brake fluid level in the brake fluid 
reservoir, please see an authorized Volkswagen dealer or authorized Volkswagen Service Facility. 
The brake fluid level drops slightly when the vehicle is being used as the brake pads wear and the 
brakes are automatically adjusted. 
Changing brake fluid 
Brake fluid must be changed according to the service schedule in your ⇒ Booklet Warranty and 
Maintenance. Have the brake fluid checked by an authorized Volkswagen dealer or an authorized 
Volkswagen Service Facility. Refill only with new brake fluid that meets the standards listed above. 
  WARNING 
Brake failure and reduced brake performance can be caused by not having enough brake 
fluid in the reservoir or by old or incorrect brake fluid. 
 x Check the brake system and brake fluid level regularly. 
 x Always change the brake fluid according to the service schedule in your 
⇒ Booklet Warranty and Maintenance. 
 x Hard braking with old brake fluid may cause vapor lock. Vapor lock reduces braking 
performance, increases stopping distances and can even cause total brake failure. 
 x Always make sure that only the correct brake fluid is used. Only use brake fluid that 
expressly conforms to VW standard 501 14 or if it is not available, only use a high-quality 
brake fluid that conforms to U.S. Standard FMVSS 116 DOT 4 requirements. 
 x Using another brake fluid, or one that is not of high quality, can impair the function of the 
brake system and reduce its effectiveness. If the container does not say that the brake fluid 
complies with VW Standard 501 14, or U.S. Standard FMVSS 116 DOT 4, do not use it. 
 x The brake fluid must be new.  
  WARNING 
Brake fluid is poisonous. 
 x To reduce the risk of poisoning, never use food, beverage or other non-original containers 
to store brake fluid. Someone might be misled by the original label on the container, or by the 
shape of the container, and drink the brake fluid. This could occur even if you relabel the 
container as “brake fluid.” 
 x Only store brake fluid in the closed, original container and keep it out of the reach of 
children.  
  NOTICE 
Brake fluid will damage vehicle paint, plastic parts and tires. Wipe any brake fluid off vehicle 
paint and other vehicle parts immediately. 
  Brake fluid can pollute the environment. Brake fluid that has leaked out must be collected and 
disposed of properly, following all applicable environmental regulations.  

 
To help make it more difficult to steal your vehicle, you should always make sure the steering column 
is locked before leaving the vehicle. 
Electronic steering column lock 
Vehicles with Keyless Access: The steering column is locked if the driver door is opened with the 
ignition switched off. The vehicle must be standing still and the transmission must be in Park (P) on an 
automatic transmission vehicle. 
If the driver door is opened before the ignition is switched off, the electronic steering column lock is 
activated only after the vehicle has been locked with the vehicle key or via the sensor in the door 
handle. 
Mechanical steering column lock 
Vehicles without Keyless Access: The steering column is locked if the vehicle is stationary and the 
vehicle key is removed from the ignition switch. 
 
Engaging the steering column 
lock 
Disengaging the steering column 
lock 
Parking the vehicle.  Turn the steering wheel slightly to 
take pressure off the steering 
column lock. 
Remove the vehicle key.  Insert the vehicle key into the 
ignition switch. 
Turn the steering wheel slightly until 
you hear the steering column lock 
engage. 
Hold the steering wheel in this 
position and turn the ignition switch. 
 
Power steering 
Power steering automatically adjusts to driving speed, steering torque, and the steering angle of the 
wheels. Power steering works only when the engine is running. 
If power steering is reduced or lost completely, it will be much harder to steer and control the vehicle. 
Counter-steering assistance 
Counter-steering assistance is part of Electronic Stability Control (ESC). This feature makes it easier 
for the driver to control the vehicle in difficult situations. For example, if you have to brake hard on a 
surface that provides uneven traction, the vehicle could pull to the right or left. ESC detects this 
situation and helps the driver counter-steer with additional steering power ⇒ . 
  WARNING 
The counter-steering assistance in ESC can do no more than help the driver steer in difficult 
situations. The driver must still control the vehicle. The vehicle does not steer by itself with 
this feature!  
  NOTICE 
If the ignition is off, the steering column lock will engage and the vehicle cannot be steered. 
For this reason, you must leave the ignition on when going through an automatic car wash, for 
example, so that the wheels will still steer.