2013 VOLKSWAGEN PASSAT CC hood release

Front view

Fig. 2 Vehicle front overview.
Key to ⇒ fig. 2:
(1) Windshield
(2) Windshield wipers
(3) Engine hood
(4) Engine hood release
(5) Headlights
(6) Headlight washers
(7) Fog lights/static cornering lights
(8) Park Distance Control (PDC) sensors (if applicable)
(9) Front license plate bracket
(10) Threaded hole for the front towing eye (behind cover)
(11) Sensor on mirror base for:
– Rain sensor
– Low-light sensor

Driver door overview

Fig. 4 Overview of controls in the driver door.
Key to fig. 4:
(1) Door handle
(2) Power locking button for locking and unlocking the vehicle 0 – 1
(3) Indicator light for anti-theft alarm system
(4) Fuel filler flap release 
(5) Lever for releasing the engine hood
(6) Key switch for locking the luggage compartment lid .
(7) Luggage compartment release switch q
(8) Switch for adjusting the outside mirror
– Adjusting outside mirrors ,

Opening and closing the engine compartment

Fig. 141 In the footwell on the driver side: Inside engine hood release lever.

Fig. 142 Above the radiator grille: Outside engine hood release.

WARNING
If the hood is not closed properly, it could fly up and block your view while you are driving.
This can lead to a crash and serious personal injuries.
x After closing the engine hood, check that the hood release lever is properly latched into
the hood latch. The engine hood must be flush with the surrounding auto body parts.
x If you ever notice that the hood latch is not properly secured when the vehicle is moving,
stop at once and close it.
x Never let anyone get in the way of the hood when closing it.
NOTICE
x Make sure the windshield wiper arms are resting on the windshield before you open the
hood. Otherwise, the windshield wipers and the hood may be damaged.
x Always put the windshield wiper arms down against the windshield before driving the
vehicle.
NOTICE
Before opening or closing the engine hood, make sure there is enough room to do so, for
example when the vehicle is in a garage.

x If vehicle components bearing safety certificates, stickers, or labels are replaced, make certain that
the firm doing the work attaches new conforming certificates, stickers, or labels to the same part of the
new components.
Safety Compliance Certification Label
A safety certificate affixed to the door jamb in the driver door confirms that at time of production all
necessary safety standards and requirements of the traffic safety agency of the respective country
were met. The month and year of production as well as the vehicle identification number may be listed
as well.
Radiator fan and high voltage warning sticker
A warning sticker about the radiator fan and the high voltage of the electrical system is located in the
engine compartment next to the engine hood release. The vehicle ignition system complies with the
Canadian standard ICES-002.
Operating your vehicle outside of the United States and Canada