2013 VOLKSWAGEN BEETLE CONVERTIBLE instrument cluster

Convenience features
To use the convenience closing feature to close all power windows, hold your finger on the lock sensor
surface on the outside of the door handle for a few seconds until the windows close.
Remove your finger from the lock sensor surface ⇒ fig. 25 (B) to stop the function. If you touch the
unlock sensor surface (A) on the inside of the door handle immediately after releasing the lock sensor
surface (B) (arrow), all of the windows will open (safety function).
Pinch protection is active during convenience closing of the windows.
NOTICE
The door handle sensor surfaces can be activated by a strong stream of water or steam if a
valid vehicle key is within range of the vehicle.
x All windows may open if you turn the spray of water or steam away from and then back onto
the door handle sensor surface in quick succession. If at least one power window is opened
and the sensor is continuously activated, convenience closing is started.
The door may not open if the outside and inside door handles are used at the same time.
If the vehicle battery or the battery in the remote control vehicle key is weak or dead, it might not
be possible to unlock and lock the vehicle using Keyless Access. The vehicle can still be manually
locked or unlocked with the key bit 266.
The driver message Key not in range appears in the instrument cluster display if there is no
remote control vehicle key inside the vehicle or if the system does not recognize the remote control
vehicle key. The key may not be recognized, for example, if it is covered by something that interferes
with the signal (such as a briefcase), or if the remote control vehicle key battery is weak. Electronic
devices such as cell phones can also interfere with the signal.
Dirt on the door handles that contains a lot of salt (especially in winter) can affect the way the
door handle sensors work. Cleaning the door handles can help with this problem.
If the automatic transmission is not in Park (P) position, the electronic steering column lock will
not lock and the vehicle will not lock via sensors in the front door handles or the remote control vehicle
key.
Anti-theft alarm system
Please first read and note the introductory information and heed the WARNINGS
Your vehicle is either equipped with an anti-theft alarm system or pre-equipped for anti-theft alarm
system installation. If the vehicle is pre-equipped for installation of the anti-theft alarm system, the
alarm system can be retrofitted by an authorized Volkswagen dealer or an authorized Volkswagen
Service Facility.
The anti-theft alarm system makes it more difficult for someone to break into or steal the vehicle.
The anti-theft alarm system is automatically activated when the vehicle is locked by pressing the lock
button on the remote control vehicle key.

Messages in the instrument cluster display
When the ignition is switched on, the indicator lights come on briefly for a function check. They go out
after a few seconds.

Display text Proper response
Speed too high!
Reduce your speed. You can only operate the convertible top at speeds
up to about 30 mph (50 km/h) . If the convertible top has already begun
opening or closing, it will stop if you drive faster. You can only continue
opening or closing the convertible top once the vehicle speed drops
below about 30 mph (50 km/h).
Decrease speed!
Reduce your speed. At 28 mph (45 km/h), the system warns the driver
not to exceed the maximum speed for opening or closing. If the opening
or closing process has already started, it will not stop.
Convert. top:
Release cover!
Convertible top cover (boot) is still installed. Roof operation is not possi-
ble. Remove the convertible top cover.
Error:
Convertible top
Service!
See an authorized Volkswagen dealer or authorized Volkswagen Service
Facility. You cannot operate the convertible top if a system component
malfunctions. Use the emergency procedure to close the open converti-
ble top if necessary
Error:
Open convertible
top!
Open the convertible top
Error:
Close convertible
top!
Have the system checked by an authorized Volkswagen dealer or an
authorized Volkswagen Service Facility. There is a malfunction in a
control module. It is not possible to open or close the convertible top.
Use the emergency procedure to close the convertible top .
Low voltage:
Please start en-
gine!
The vehicle battery is drained to the point that it cannot provide the
power needed to completely open or close the convertible top. Start the
engine by jump-starting if necessary. Open or close the convertible top
while the engine is running. Volkswagen recommends taking a longer
drive afterward to help recharge the vehicle battery.
Convertible
top open
This message and a chime confirm that the convertible top is completely
open or closed.
Convertible
top closed
Convertible top
not functional.
Owner's manual!
Outside temperature too low. You can still close the convertible top, if
necessary.
Have the system checked by an authorized Volkswagen dealer or an
authorized Volkswagen Service Facility. There is a malfunction in a
control module. It is not possible to open or close the convertible top.
Use the emergency procedure to close an open convertible top if neces-
sary .
Continue
convertible
top operation
The opening or closing process was interrupted. Press the button
⇒ fig. 30 (A) again until the opening or closing process has finished.
Convertible
top operation
This text message indicates the convertible top is currently opening or
closing. Press and hold the button ⇒ fig. 30 (A) again until the opening or
closing process has finished.

The instrument cluster displays and their arrangement may vary depending on the vehicle model
and engine. For displays without warning and information messages, malfunctions are only signaled
with indicator lights.
General information
Checklist
Perform the following preliminary requirements each time before opening or closing the con-
vertible top:
1. Park the vehicle a safe distance from moving traffic.
2. Park the vehicle so that it is as level as possible. The vehicle must not be on a hoist, it must not
have one side parked on a curb, and it must not be raised on a vehicle jack.
3. Remove all objects from the convertible top.
4. Remove all objects from the area of the convertible top compartment.
5. Remove ice and snow from the convertible top before opening.
6. Do not operate the convertible top in temperatures below 15 °F (-10 °C).
7. Allow the convertible top to dry completely before opening.
Checklist
The following technical requirements must be met to open or close the convertible top:
¥ The ignition must be switched on
¥ The vehicle speed must be no more than 30 mph (50 km/h).
¥ The outside temperature must be above 15 °F (-10 °C).
¥ The battery must have enough charge.
If any changes have been made in the operation of the convertible top compared with its original
factory condition, Volkswagen strongly urges you to take the vehicle to an authorized Volkswagen
dealer or other authorized Volkswagen Service Facility to have the top restored to its original condi-
tion. Mechanical changes and changes to the vehicle software must be entered in the
⇒ Booklet Warranty and Maintenance.
WARNING
Disregarding the safety-related checklist may lead to accidents and serious personal injuries.
x Always review and follow the checklist. Follow accepted safety practices and use common
sense.

Opening and closing the convertible top

Fig. 30 In the roof console: convertible top button.
You can open or close the convertible top at speeds up to 30 mph (50 km/h). If the convertible top has
already begun opening or closing, it will stop if you exceed that speed. You can only continue opening
or closing the convertible top once the vehicle speed drops below about 30 mph (50 km/h).
For safety reasons, Volkswagen recommends opening or closing the convertible top only when the
vehicle is stationary and parked at a safe distance from moving traffic ⇒ .
Opening the convertible top
x Please note and follow the steps described in the checklists
x Switch on the ignition, if necessary
x Press and hold the button ⇒ fig. 30 in the roof console until all windows go down and the convert-
ible top is completely open ⇒ . A chime sounds and the indicator light in the instrument cluster
goes out when the process is complete. A message may also appear in the instrument cluster display.
x Secure the convertible top cover (boot), if necessary
Closing the convertible top
x Please note and follow the steps described in the checklists
x Switch on the ignition, if necessary
x Remove the convertible top cover (boot), if necessary
x Pull and hold the button until the convertible top and all windows close completely ⇒ : a chime
sounds and the indicator light in the instrument cluster goes out. A message may also appear in the
instrument cluster display.
Interrupting convertible top operation
Releasing the button interrupts convertible top operation ⇒ .

WARNING
Uncontrolled or unintentional opening and closing of the convertible top can cause accidents
and serious injuries.
x Never open or close the convertible top unless the vehicle is parked and at a safe distance
from traffic.
x Do not open or close the convertible top unless you have made sure that nobody is in the
way of the luggage compartment lid, the convertible top supports, and other moving parts.
x Make sure the closed convertible top is latched securely.
x If convertible top operation is interrupted:
– The convertible top may not stop moving immediately. Gravity may cause the converti-
ble top to continue moving.
– If you cannot close the convertible top “normally,” use the emergency closing proce-
dure to latch it, if necessary.
– Note the messages in the instrument cluster that indicate if the convertible top has
closed and latched correctly.
NOTICE
Frequent opening and closing of the convertible top drains the vehicle battery. To help prevent
the battery from draining, leave the engine running if opening and closing the roof frequently.
NOTICE
If the convertible top is open, rain could enter the vehicle and wet the interior, causing vehicle
damage.
x Always close the convertible top and lock the doors and the luggage compartment before
leaving the vehicle.
NOTICE
The height of the vehicle changes when the convertible top is opening or closing. When there
is not enough room above the vehicle, for example in a garage, the convertible could hit some-
thing and be damaged.
x Only open or close the convertible top when there is enough room above the vehicle to do
so.
If you park vehicle with the convertible top down, the passenger compartment can be damaged
by rain or snow, and it is also open to unauthorized persons. Volkswagen recommends closing the
convertible top before you leave the vehicle. If you must leave things in the vehicle when the top is
down, you should lock them in the luggage compartment.

The convertible top button does not work when the convertible top cover is installed. If the button
is pressed anyway, the convertible top indicator light will blink as long as the button is pressed.
What to do if the convertible top will not move

Description Possible solution
The convertible top
will not open or close.
– Check to make sure all the preliminary requirements for convertible top
operation are met
– If the convertible top still will not operate, use the emergency procedure to
close the convertible top, if necessary
– Have the system checked by an authorized Volkswagen dealer or an
authorized Volkswagen Service Facility.
The convertible top
stops when opening
or closing.
– Check the instrument cluster display for information on what to do ⇒ table.
– Pull the button ⇒ fig. 30 to completely close and latch the convertible top.
– If the convertible top does not close completely and latch, try to close and
latch it using the emergency closing procedure
– Get professional help if necessary and have the system checked by an
authorized Volkswagen dealer, an authorized Volkswagen Service Facility,
or another qualified workshop.

Automatic Rollover Support System

Fig. 35 Behind the rear bench seat backrest: Automatic Rollover Support System.
The Automatic Rollover Support System® works with the reinforced windshield frame, properly worn
safety belts, and the airbag system, to help protect vehicle occupants in a rollover accident.
If the Automatic Rollover Support System is triggered, 2 supports behind the rear seat backrest deploy
upwards in a fraction of a second.
The Automatic Rollover Support System works only when the ignition is switched on. It deploys when
the convertible top is open as well as when it is closed.
The Automatic Rollover Support System is electronically controlled together with the airbag system. A
malfunction in the rollover support system is indicated by the airbag indicator light t in the instrument
cluster

WARNING
Damage to safety belts reduces their overall effectiveness and increases the risk of serious
personal injury and death whenever the vehicle is being used.
x Never let safety belts become damaged by being caught in the door or seat hardware.
x Torn or frayed safety belts can tear, and damaged safety belt hardware can break in an
accident.
x Inspect belts regularly for damage. If webbing, bindings, buckles, or retractors are dam-
aged, have the belts replaced immediately with the correct replacement belts approved by
Volkswagen for your vehicle, model, and model year.
x Safety belts that were subject to stress in an accident and stretched must be replaced with
a correct, new safety belt, preferably by an authorized Volkswagen dealer or authorized
Volkswagen Service Facility.
x Replacement after a crash may be necessary even if a safety belt shows no visible dam-
age. Anchorages that have been loaded must also be inspected.
x Damaged safety belts must be replaced; they cannot be repaired.
x Never try to repair a damaged safety belt yourself. Never remove or modify the safety belts
in any way.
x Have safety belts, bindings, retractors and buckles replaced by an authorized Volkswagen
dealer or authorized Volkswagen Service Facility.
x Always keep the belts clean. Dirty belts may not work correctly and can impair the func-
tion of the inertia reel.
Warning light

Fig. 45 Warning light in the instrument cluster.

Lights
up Possible cause Proper response
 One or more driving lights not working.
Replace burned out bulb , or
If all light bulbs are OK, see an authorized
Volkswagen dealer or authorized
Volkswagen Service Facility.

Fog lights switched on (indicator light on
the headlight switch or the instrument
cluster).




Left or right turn signal.
The indicator light blinks twice as fast if a
turn signal is not working on the vehicle.
Check the turn signals on the vehicle.
 High beams switched on or headlight
flashers in use.

When the ignition is switched on, several warning and indicator lights come on briefly for a function
check. They go out after a few seconds.
WARNING
Failure to heed warning lights and instrument cluster text messages can cause the vehicle to
break down in traffic and result in a collision and serious personal injury.
x Never ignore warning lights or text WARNINGS.
x Always stop the vehicle as soon as it is safe to do so.
x Whenever stalled or stopped for repair, move the vehicle a safe distance off the road, stop
the engine, turn on the emergency flashers, and use other warning devices to warn
approaching traffic.
x Never park the vehicle in areas where the hot catalytic converter and exhaust system can
come into contact with dry grass, brush, spilled fuel, oil, or other material that can catch fire.
x A broken down vehicle presents a high accident risk for itself and others. Switch on
emergency flashers and set up a warning triangle to warn oncoming traffic.
NOTICE
Failure to heed warning lights or text WARNINGS can result in vehicle damage.
High Intensity Discharge (HID) headlights provide bright, uniform lighting to help you see and be
seen. The light comes from an electric arc between two electrodes in the gas-filled bulb. Over time, the
electrodes can wear down and the gap between them will get wider. The HID lamp’s control unit then
increases the voltage to keep the arc’s brightness constant. However, the commonly called “Xenon”
bulbs will also ultimately burn out. Before they burn out, HID lamps can flicker. A message will then
appear in the MFI. This is your reminder to see an authorized Volkswagen dealer or an authorized
Volkswagen Service facility to check the headlights.