2013 TOYOTA YARIS HYBRID child restraint

190 1-8. Safety information
YARIS_F (including HV)_WE_52D27E
CAUTION
When children are in the vehicle
Do not allow children to play with the seat belt. If the seat belt becomes
twisted around a child’s neck, it may lead to choking or other serious injuries
that may result in death.
If this occurs and the buckle cannot be unfastened, scissors should be used
to cut the belt.
When the child restraint system is not in use
Keep the child restraint system properly secured on the seat even if it is
not in use. Do not store the child restraint system unsecured in the pas-
senger compartment.
If it is necessary to detach the child restraint system, remove it from the
vehicle or store it securely in the luggage compartment. This will prevent it
from injuring passengers in the event of a sudden stop, sudden swerve or
accident.

191
1
1-8. Safety information
Before driving
YARIS_F (including HV)_WE_52D27E
Installing child restraints
Follow the child restraint system manufacturer’s instructions. Firmly
secure child restraints to the seats using a seat belt or ISOFIX rigid
anchors. Attach the top strap when installing a child restraint.
Seat belts (An ELR belt
requires a locking clip.)
Vehicles with rear seats:
ISOFIX rigid anchors
(ISOFIX child restraint sys-
tem)
Lower anchors are provided for
outside rear seats. (Tags dis-
playing the location of the
anchors are attached to the
seats.)
Vehicles with rear seats:
Anchor brackets (for the top
strap)
Anchor brackets are provided
for outside rear seats.

192 1-8. Safety information
YARIS_F (including HV)_WE_52D27E
Installing child restraints using a seat belt
Rear facing Baby seat/child seat
Place the child restraint system
on the rear seat facing the rear
of the vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Install a locking clip near the tab
of the lap and shoulder belt by
inserting the lap and shoulder
webbing through the recesses of
the locking clip. Buckle the belt
again. If the belt has any slack,
release the buckle and reinstall
the locking clip.

193 1-8. Safety information
1
Before driving
YARIS_F (including HV)_WE_52D27EForward facing Child seat
Remove the head restraint. (P. 131)
Place the child restraint system
on the seat facing the front of the
vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Install a locking clip near the tab
of the lap and shoulder belt by
inserting the lap and shoulder
webbing through the recesses of
the locking clip. Buckle the belt
again. If the belt has any slack,
release the buckle and reinstall
the locking clip.

194 1-8. Safety information
YARIS_F (including HV)_WE_52D27EJunior seat
Place the child restraint system
on the seat facing the front of the
vehicle.
Sit the child in the child restraint
system. Fit the seat belt to the
child restraint system according
to the manufacturer’s instruc-
tions and insert the plate into the
buckle. Make sure that the belt is
not twisted.
Check that the shoulder belt is
correctly positioned over the
child’s shoulder and that the lap
belt is as low as possible.
(P. 133)
Removing a child restraint installed with a seat belt
Push the buckle release button
and fully retract the seat belt.

195 1-8. Safety information
1
Before driving
YARIS_F (including HV)_WE_52D27E
Installation with ISOFIX rigid anchors (ISOFIX child restraint
system) (vehicles with rear seats)
Widen the gap between
the seat cushion and
seatback slightly.
Latch the buckles onto
the anchors.
If the child restraint has a
top strap, the top strap
should be latched onto the
anchor bracket.

196 1-8. Safety information
YARIS_F (including HV)_WE_52D27E
Child restraint systems with a top strap (vehicles with rear seats)
Vehicles with a luggage cover: Remove the luggage cover.
(P. 441)
Remove the head restraint. (P. 131)
Secure the child restraint system using a seat belt or ISOFIX
rigid anchors.
Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top strap.
Make sure the top strap is
securely latched.
Vehicles with a luggage cover: Reinstall the luggage cover.
When installing a child restraint system using a seat belt
You need a locking clip to install the child restraint system using a seat belt.
Follow the instructions provided by the manufacturer of the system. If your
child restraint system does not provide a locking clip, you can purchase the
following item from any authorized Toyota dealer or repairer, or another duly
qualified and equipped professional:
Locking clip for child restraint system
(Part No. 73119-22010)

197 1-8. Safety information
1
Before driving
YARIS_F (including HV)_WE_52D27E
CAUTION
When installing a child restraint system
Follow the directions given in the child restraint system installation manual
and fix the child restraint system securely in place.
If the child restraint system is not correctly fixed in place, the child or other
passengers may be seriously injured or even killed in the event of sudden
braking, sudden swerving or an accident.
If the driver’s seat interferes with the
child restraint system and prevents it
from being attached correctly, attach
the child restraint system to the right-
hand rear seat (left-hand drive vehicles)
or the left-hand rear seat (right-hand
drive vehicles).
Adjust the front passenger seat so that
it does not interfere with the child
restraint system.
When installing a forward-facing child
restraint system on the front passenger
seat, move the seat as far back as pos-
sible.
Failure to do so may result in death or
serious injury if the airbags deploy
(inflate).