2013 TOYOTA xD reset

10
10
XM
Satellite
Radio
broadcastSwitches
over to
the next
preset
channel.If you remove
your hand from
the button
for less than
1.5 seconds,
T YPE SEEK is
initiated.
When
the SEEK
function
is in
effect,
channels
that are
being
tuned
in can
continue
to be
listened
to. If you press
down on this
button for 1.5
seconds or
longer, the
SEEK function
continues
to be active
during the
time the
button is
pressed down.
When you
release your
hand from the
button, you
will continue
to receive the
channel that
was tuned in.AM Play is
switched
over to
the next
preset
channel.If you remove
your hand from
the button
for less than
1.5 seconds,
the system
searches for
stations where
reception is
possible in
ascending
order. When
such a station
is detected, it
is tuned in.
HD Radio
broadcastIf you press
this button
down on for
1.5 seconds or
longer, even
with frequency
loops, the
SEEK function
continues to
operate (Non-
stop SEEK
function).
If you release
the button
during
operations of
the non-stop
SEEK function,
this changes
to the SEEK
function.

11
11
FM
HD Radio
broadcastSwitches
over to
the next
preset
channel.If you remove
your hand from
the button
for less than
1.5 seconds,
the system
searches for
stations where
reception is
possible in
ascending
order. When
such a station
is detected,
it is tuned
in. The PT Y
select function
becomes
active when
the PT Y genre
is established.If you press
this button
down for 1.5
seconds or
longer, even
with frequency
loops, the
SEEK function
continues to
operate (Non-
stop SEEK
function).
If you release
the button
during
operations
of the non-
stop SEEK
function, this
will change
to the SEEK
function. The
PT Y selection
function is
canceled when
the non-stop
SEEK function
is in effect.3
[∨ ]
Source Actions
when
pressed
downActions when
the button is
kept pressed
down for 0.8
seconds or
longer
BeSpoke Nothing happens.Nothing
happens.
USB Playback is returned
to the
beginning
of the
file. If
you press
again, the
previous
file is
played
back.The first song
in the previous
folder is played
back.

1
1 
iPod Playback
is returned
to the
beginning
of the
file. If
you press
again, the
previous
file is
played
back.Nothing
happens.
Pandora Nothing happens.Nothing
happens.
CD Playback is returned
to the
beginning
of the
track. If
you press
again, the
previous
track is
played
back.Nothing
happens.MP3 Playback
is returned
to the
beginning
of the
file. If
you press
again, the
previous
file is
played
back.The first song
in the previous
folder is played
back.
WMA
Bluetooth
audioPlayback
is returned
to the
beginning
of the
track. If
you press
again, the
previous
track is
played
back. The first song
of the previous
album is played
back.
XM
Satellite
Radio
broadcast Playback
is
switched
over to
the next
preset
channel.If you release
your finger
from the button
for about one
second, T YPE
SEEK starts.
When
the SEEK
function is
in effect,
you can
continue
to listen to
channels
that are
being
tuned in.If you press
down and hold
this button
for over one
second, SEEK
continues to
operate during
the time the
button is
pressed down.
When you
release your
finger from the
button, you
will continue
to receive the
channel that
was tuned in.
AM Playback is
switched
over to the
previous
preset
channel.If you remove
your hand from
the button for
less than 1.5
seconds and
a station is
detected, it is
tuned in.
HD Radio
broadcast

13
13
If you press
down on this
button for 1.5
seconds or
longer, even
with frequency
loops, the
SEEK function
continues to
operate (Non-
stop SEEK
function). If
you release the
button during
operations of
the non-stop
SEEK function,
this will change
to the SEEK
function.
FM
HD Radio
broadcast Switches
over to the
previous
preset
channel.If you remove
your hand from
the button for
less than 1.5
seconds, the
station detected
is tuned in.
The PT Y select
function is
activated when
the PT Y genre
is established.If you press
and hold down
this button
longer than one
second, even
with frequency
loops, SEEK
continues to
operate (non-
stop SEEK). If
you release the
button during
the non-stop
SEEK, you will
be switched
over to SEEK.
PT Y selection is
canceled when
non-stop SEEK
is in effect.
4
[VOL]Press [+] to increase the volume and
press [–] to decrease the volume.
5 []/[]/[]Use these buttons with hands-free
phoning. Depending on the model,
some vehicles are not equipped with
these buttons.
Source Actions when pressed
down
( Talk Switch)Activate the voice
recognition mode.
(Off Hook)Press to answer
incoming phone calls.
When the phone is set
to Call Waiting and a
call comes in while you
are on the phone, use
this to toggle between
the calls.
(On Hook)Use to hang up without
answering the phone.
Press to hang up
during a call.

17
17
Changing the Frequency
Manually
Touch [] and then, after chang-
ing the MULTI KNOB to Tune/Scroll
mode, turn the MULTI KNOB to the
right to increase the frequency and
to the left to decrease the frequency.
• If the volume fluctuates, touch []
to change to the Tune/Scroll mode,
where you can change the frequency.
Searching for Frequencies That
Can Be Tuned In
Touch either [] or [] to search
in either ascending or descending
order for stations that can be tuned
in. When a station is detected, that
station will be tuned in.
If you press down on either of these
for 1.5 seconds or longer, even with
frequency loops, the SEEK function
continues to operate (Non-stop SEEK
function). If you release either during
operations of the Non-Stop SEEK
function, the SEEK function will take
over.
For FM, the PT Y select function is
activated when the PT Y genre is
established. However, when the
Non-Stop SEEK function is active,
the PT Y selection function is can-
celed.
•
• Listening to Preset Channels
Touch [Presets] to display the Preset
screen. Touch on any channel
from 1 to 6 on the Preset screen.
Frequencies recorded on the preset
channel will be tuned in.
Touch [>>] to switch the display to the
next preset page, and [<<] to switch
the display to the previous preset
page.
The pages change in the order of AM
d FM1
d FM2 d SAT1 d SAT2 d
SAT3 ( d Return to AM). (SAT is only
displayed when the SAT unit is con-
nected.)
Recording the current frequency
on the preset channel
Touch any channel from 1 to 6 on
the Preset screen, continuing to
touch the channel for 1.7 seconds or
longer.
NOTICE
You can store up to 6 stations
per band.
Temporarily Muting the Sound
Touch [] to temporarily mute the
sound. Touch [] to resume audio
output.
•
•
• Searching for Frequencies That
Can be Tuned In (Only for FM/
HD Radio / XM Satellite Radio)
Touch [SCAN] to search for frequen-
cies that can be tuned in. Audio
output will be produced in 5 -second
snippets for stations that have been
located. If you touch on [SCAN]
again during the time of the audio
output from the station you want to
listen to, that station will be tuned in.
When setting the PT Y genre, audio
from stations applicable to the PT Y
genre that has been set up is output
continuously in 5 -second snippets. If
you again touch [SCAN], the broad -
cast being output will continue to be
tuned in and you will be able to select
a PT Y genre. If you loop the search for
stations without touching [SCAN], a
beeping sound will be emitted and the
last radio station to be picked up will
be tuned in and then you will be able
to select a PT Y genre (Only for XM
Satellite Radio). Audio broadcasts cor-
responding to the current categories
are continuously output in 5 -second
snippets. If you touch [SCAN] again,
you will continue to receive the broad-
cast being output. If you loop the
detection of stations without touching
[SCAN], you will hear a beeping sound
and the last station to be received will
be tuned in.
•

31
31
Connecting the iPod
(iPhone)
Connect the USB connector.
Connect the iPod as indicated in
the figure below using an optional
cable.
Push the Dock connector into the
Dock connector port until you
hear a click to connect firmly. If it
does not go in smoothly, it may be
upside down so do not force it in
as this may result in damage.
To the vehicle's
connector
*3
*1
USB port
*2Jack port
Dock
connector iPod (iPhone) with Dock
connector port
When connecting the iPod, remove
a headphone cable from the iPod.
When connecting the iPod, it is
recommended to use a separately
purchased car kit.
*1
It is recommended to use a USB
cable which satisfies USB 2.0
standards.
(Measurements should satisfy USB
2.0 standards.)
*2 Fo

r United States model only.
Vehicle AUX jack will not function
as a AUX input.
*3 Co

nnection location differs depend -
ing on the vehicle.
Vehicle
type Connection location
tC Connect to the connector near the shift knob.
xB Connect to the connector near the parking brake.
xD Connect to the connector near the cup holder.
iQ Connect to the connector near the shift knob.
FR-S Connect to the connector near the shift knob.
As soon as the iPod is connected, its
power is automatically turned on.
While the iPod is connected to this
unit, indicates that an accessory
has been connected to the iPod. When the ignition switch is set
to ACC or ON, the iPod’s battery
is charged while the iPod is
connected to this unit.
You cannot use the iPod’s remote
control at the same time.
You may hear noise if you
disconnect during iPod playback.
NOTICE
To resolve most problems
when using your iPod with
the Scion Audio system,
disconnect your iPod from the
vehicle iPod connection and
reset it.
For instructions on how to
reset your iPod, refer to the
User Guide of your iPod.
Connect the Dock connector
directly to the iPod with
Dock connector port. Do not
connect it via the iPod Dock or
other connection.
When the iPod is connected
to this unit, sound will also be
heard from the headphone of
the iPod.
Disconnect the headphone
from the iPod before use.
•
•
•
•
•
•
•
•

3
3
NOTICE
If you install an audio system
other than a Scion Genuine
Audio, you will not be able to
use the USB connector.
If the iPod does not operate
with Scion Audio system,
disconnect the connector from
the iPod and reconnect again.
When you are using iPhone by
the multitasking, according to
the application under use, it
might not be able to charge a
battery.
When connecting a Bluetooth
enabled iPod via the Dock
connector, the iPod or
Pandora
® may not produce
any sound on this unit. If
this happens, turn the iPod
Bluetooth function off.
•
•
•
•
NOTICE
If this product does not recognize
or otherwise behaves erratically
when an iPod/iPhone that has
been updated with the latest
software/firmware (iTunes) is
connected, follow the steps
below.
1. Disconnect the iPod/iPhone cable and then reconnect it.
2. Turn the iPod/iPhone off and then turn the device back on
again.
3. Disconnect the cable from the iPod/iPhone and reset them.
After starting up the iPod/
iPhone, connect the product
using a cable.
Disconnecting the iPod
(iPhone)
Remove the connector.
When disconnecting the iPod
connector, grasp the connector
firmly and pull it towards you.

51
51
Formatting/not formatting personal
data recorded on the system
After touching [Delete Personal
Data], touch either [Delete] or [Do
Not Delete].
[Delete]Deletes personal data
that has been recorded in
the system as following:
- Th e s

ource type that
was last played back
- Th e l

ast volume setting
used
- Ea c

h setting value for
the radio source
- Th e p

reset content of
the radio source
- Ea c

h setting value for
the sound settings
- Ea c

h setting value for
the system settings
- Ea c

h setting value
for the contrast &
brightness
- Ea c

h setting value for
the Bluetooth settings
- Th e c

ontacts, speed
dials and call history for
hands-free phoning
[Do Not
Delete]Returns to the General
Settings menu without
deleting personal data
that has been recorded in
the system.
Setting Up Voice Guidance
(For Phone)
Touch on [Voice] on the Setup menu
to display the Voice Settings menu.
Next touch on the settings that fol-
low to establish them.
You can set this item, when the
microphone is connected.
Changing the voice output level
Touch one of the following.
[1] -[7] Establishes the voice output level of Voice
Guidance. The lower
the setting number,
the lower the voice
output level and the
higher the setting
number, the higher the
voice output level
Setting up/not setting up voice
guidance
After touching [Voice Recognition
Prompts], touch either [ON] or [OFF].
[ON] With this setting, Voice Guidance is activated.
[OFF] With this setting, Voice Guidance is not
activated.
Returning the Voice Guidance
v oi c

e output level to Level 
Touch [Default].
• Setting Up Bluetooth
Touch on [Bluetooth] on the Setup
menu to display the Bluetooth
Settings menu. Next touch on the
settings that follow to set them up.
Connecting/disconnecting
registered Bluetooth devices
Touch on [Registered Bluetooth
Device] to display a list of the
Bluetooth devices that have been
registered. Touch one of the follow-
ing.
[Add New] Registers the
Bluetooth device.
[Remove] Excludes the selected Bluetooth device from
the list.
[Detail] With this setting, information regarding
the selected Bluetooth
device is displayed.
•