Page 246 of 346
REAR VIEW MONITOR SYSTEM
246
5. When the vehicle width extension lines
and the parking space side lines are paral-
lel, straighten the steering wheel (straight
backward position) and then carefully
back up until the entire vehicle is within the
parking space.
Even if the distance guide line and the
parking space rear edge appear to be par-
allel on the screen, in reality they may not
be parallel.
Example of how to use the system
when parking (perpendicular park-
ing)
The following example describes the pro-
cedure for pulling into a parking space on
the left. For pulling into a parking space on
the right, substitute right for left and vice
versa in all steps.
1. Put the shift lever in the “R” position. If
any other display mode is selected, switch
to guide line display mode.
2. While referring to the screen and mir-
rors, back into the parking space.
— Guide line display mode
Page 247 of 346
REAR VIEW MONITOR SYSTEM
247
3. Back up until the parking assist guide-
lines meet the left edge of the parking
space. Stop the vehicle, turn the steering
wheel all the way to the right, and back up
the vehicle to park.
The point at which you should turn the
steering wheel depends on the width of the
parking space.4. When the vehicle is in the parking
space, turn the steering wheel so that the
vehicle width extension guide lines and the
clearance to the left and right of the parking
space are about the same near the vehi-
cle. Back up slowly.
Page 248 of 346
REAR VIEW MONITOR SYSTEM
248
5. Turn the steering wheel so that the ve-
hicle width extension guide lines are paral-
lel with the parking space lines. When the
lines are parallel, straighten the steering
wheel and back up slowly.
Even if the distance guide line and the
parking space rear edge appear to be par-
allel on the screen, in reality they may not
be parallel.When there is only one line dividing the
spaces in a parking lot, even if the vehicle
width extension guide lines and the park-
ing space right side (left side) appear to be
parallel on the screen, in reality they may
not be parallel.
Page 249 of 346
REAR VIEW MONITOR SYSTEM
249
If the message “System initializing” will be
displayed on the screen, the help screen
appears when
is touched. Make a
correction using the following method in
accordance with the display.
When the vehicle is stopped, turn the
steering wheel all the way to the left, then
all the way to the right. (It does not matter
in which direction — right or left — you turn
first.)
When the screen returns to the original dis-
play, correction is complete.
If the above screen remains, have the ve-
hicle inspected at your Toyota dealer.
— If the message “System
initializing” will be displayed
Page:
< prev 1-8 9-16 17-24