2013 TOYOTA PRIUS PLUS light

242 2-2. Instrument cluster
PRIUS +_OM_OM47841E_(EE)
*1: These lights turn on when the “POWER” switch is turned to the ON
mode to indicate that a system check is being performed. They will
turn off after the hybrid system is on, or after a few seconds. There
may be a malfunction in a system if a light does not come on, or if the
lights do not turn off. Have the vehicle inspected by any authorized
Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional.
*2: The light flashes to indicate that the system is operating.
*3: The light comes on when the system is turned off. The light flashes
faster than usual to indicate that the system is operating.
Eco Driving Indicator
Light (P. 235)
(if equipped)
“PCS” warning
(P. 301)
EV drive mode indica-
tor (P. 213)
SRS airbag on-off
indicator (P. 1 6 6 )
Shift position indicators
(P. 216)
*1*1, 3

243 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47841E_(EE)
Warning lights
Warning lights inform the driver of malfunctions in any of the
vehicle’s systems. (P. 463)
*1: These lights turn on when the “POWER” switch is turned to ON
mode to indicate that a system check is being performed. They will
turn off after the hybrid system is on, or after a few seconds. There
may be a malfunction in a system if a light does not come on, or if
the lights do not turn off. Have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and
equipped professional.
*2: The light flashes to indicate a malfunction.
(red)
(yellow)(if equipped)(if equipped)
(if equipped)(if equipped)(yellow)(if equipped)(yellow)
*1*1*1*1*1*1*1
*1*1*1*1*1*1*1
*1*1, 2*1*1

244 2-2. Instrument cluster
PRIUS +_OM_OM47841E_(EE)
CAUTION
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS airbag warning light
not come on when you start the hybrid system, this could mean that these
systems are not available to help protect you in an accident, which could
result in death or serious injury. Have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional immediately if this occurs.

246 2-2. Instrument cluster
PRIUS +_OM_OM47841E_(EE)
Switching the head-up display
On/off
When on, the indicator light on
the “HUD” switch comes on.
Head-up display contents
Speedometer
Displays the vehicle speed.
Touch tracer display
The steering switches operation status is displayed for confirmation
purposes. (P. 247)
Turn-by-turn navigation*
Displays a notification of upcoming intersections during navigation
system route guidance. (P. 248)
Dynamic radar cruise control*
Displays the approach warning. (P. 272)
PCS (Pre-Crash Safety System)*
Indicates that there is a possibility of collision. (P. 300)
*: If equipped

247 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47841E_(EE)
Touch tracer display
When the audio control switches,
climate control switches, “DISP”
button or “TRIP” button of the
steering wheel are touched, the
touch tracer display will appear
in front of the display, with the
touched button highlighted to
allow the driver to identify the
button that is being operated.
The button can then be operated
by further presses.
If an audio/navigation system is
used that is not compatible with
the steering switches in this vehi-
cle, the audio switch display may
not operate correctly.

253
2
When driving
PRIUS +_OM_OM47841E_(EE)
2-3. Operating the lights and windshield wipers
Headlight switch
The headlights can be operated manually or automatically.
Turning the end of the lever turns on the lights as follows:
The daytime running
lights turn on.
The front position
lights, tail, license
plate and instrument
panel lights turn on.
The headlights and
all the lights listed
above turn on.
The headlights, front
position lights, and
so on turn on and off
automatically (when
the “POWER” switch
is in ON mode).
(if equipped)

254 2-3. Operating the lights and windshield wipers
PRIUS +_OM_OM47841E_(EE)
Turning on the high beam headlights
With the headlights on, push
the lever away from you to
turn on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams
with the headlights on or off.
Manual headlight leveling dial (if equipped)
The level of the headlights can be adjusted according to the number
of passengers and the loading condition of the vehicle.
Raises the level of the head-
lights
Lowers the level of the head-
lights

255 2-3. Operating the lights and windshield wipers
2
When driving
PRIUS +_OM_OM47841E_(EE)Guide to dial settings
Occupancy and luggage load conditionsDial positionOccupantsLuggage load
Driver None 0
Driver and front
passengerNone 0
All seats occupied None 3
All seats occupied Full luggage loading 4
Driver Full luggage loading 5
Driver and front
passenger.
And all passenger in the
rear seats farthest to the
rear.None 1.5
Daytime running light system
To make your vehicle more visible to other drivers, the daytime running lights
turn on automatically whenever the hybrid system is started and the parking
brake is released.