Page 377 of 572

377 4-1. Maintenance and care
4
Maintenance and care
PRIUS +_OM_OM47841E_(EE)
Note for a smart entry & start system
If the door handle becomes wet while the electronic key is within the effec-
tive range, the door may lock and unlock repeatedly. Place the key in a posi-
tion 2 m (6 ft.) or more separate from the vehicle while the vehicle is being
washed. (Take care to ensure that the key is not stolen.)
Aluminum wheels
Remove any dirt immediately by using a neutral detergent. Do not use
hard brushes or abrasive cleaners. Do not use strong or harsh chemical
cleaners.
Use the same mild detergent and wax as used on the paint.
Do not use detergent on the wheels when they are hot, for example after
driving for long distance in the hot weather.
Wash detergent from the wheels immediately after use.
Bumpers
Do not scrub with abrasive cleaners.
Front side windows water-repellent coating (if equipped)
The following precautions can extend the effectiveness of the water-
repellent coating.
• Remove any dirt etc. from the front side windows regularly.
• Do not allow dirt and dust to accumulate on the windows for a long
period. Clean the windows with a soft and damp cloth as soon as pos-
sible.
• Do not use wax or glass cleaners that contain abrasives when cleaning
the windows.
• Do not use any metallic objects to remove condensation build up.
When the water-repellent performance has become insufficient, the coat-
ing can be repaired. Contact any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
Page 409 of 572

409 4-3. Do-it-yourself maintenance
4
Maintenance and care
PRIUS +_OM_OM47841E_(EE)
Before recharging
When recharging, the 12-volt battery produces hydrogen gas which is flam-
mable and explosive. Therefore, observe the following precautions before
recharging:
If recharging with the 12-volt battery installed on the vehicle, be sure to
disconnect the ground cable.
Make sure the power switch on the charger is off when connecting and
disconnecting the charger cables to the 12-volt battery.
After recharging/reconnecting the 12-volt battery
Unlocking the doors using the smart entry & start system may not be
possible immediately after reconnecting the 12-volt battery. If this hap-
pens, use the wireless remote control or the mechanical key to lock/
unlock the doors.
Start the hybrid system with the “POWER” switch in ACCESSORY mode.
The hybrid system may not start with the “POWER” switch turned off.
However, the hybrid system will operate normally from the second
attempt.
The “POWER” switch mode is recorded by the vehicle. If the 12-volt bat-
tery is reconnected, the vehicle will return the “POWER” switch mode to
the status it was in before the 12-volt battery was disconnected. Make
sure to turn off the power before disconnect the 12-volt battery. Take
extra care when connecting the 12-volt battery if the “POWER” switch
mode prior to discharge is unknown.
Restart the hybrid system, depress the brake pedal, and confirm that it is
possible to shift into each shift position.
If the system will not start even after multiple attempts at all methods above,
contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.
Page 424 of 572
424
4-3. Do-it-yourself maintenance
PRIUS +_OM_OM47841E_(EE)
Electronic key batter y
Replace the battery with a new one if it is depleted.
You will need the following items:
Flathead screwdriver
Lithium battery CR1632
Replacing the battery
Take out the mechanical key.
Remove the cover.
To prevent damage, cover the
tip of the screwdriver with a
rag.
STEP 1
STEP 2
Page 425 of 572
425 4-3. Do-it-yourself maintenance
4
Maintenance and care
PRIUS +_OM_OM47841E_(EE)
Use a CR1632 lithium battery
Batteries can be purchased at any authorized Toyota dealer or repairer,
or another duly qualified and equipped professional, local electrical appli-
ance shops or camera stores.
Replace only with the same or equivalent type recommended by the
manufacturer.
Dispose of used batteries according to local laws.
If the electronic key battery is depleted
The following symptoms may occur:
The smart entry & start system and wireless remote control will not func-
tion properly.
The operational range will be reduced.
Remove the depleted battery.
Insert a new battery with the
“+” terminal facing up.
When installing, reverse the steps listed.
ITO43P194
STEP 3
STEP 4
Page 453 of 572
5When trouble arises
453
PRIUS +_OM_OM47841E_(EE)
5-1. Essential information
Emergency flashers .......... 454
If your vehicle needs to
be towed ......................... 455
If you think something is
wrong .............................. 462
5-2. Steps to take in an
emergency
If a warning light turns on
or a warning buzzer
sounds ............................ 463
If you have a flat tire
(vehicles with spare
tire) ................................. 476
If you have a flat tire
(vehicles without a
spare tire) ....................... 488
If the hybrid system
will not start..................... 510
If you lose your keys ......... 512
If the electronic key does
not operate properly ....... 513
If the 12-volt battery is
discharged ...................... 516
If your vehicle
overheats ........................ 522
If the vehicle becomes
stuck ............................... 528
If your vehicle has to
be stopped in an
emergency ...................... 530
Page 473 of 572
5
473 5-2. Steps to take in an emergency
When trouble arises
PRIUS +_OM_OM47841E_(EE)
Follow the correction procedures.
After taking the specified steps to correct the suspected problem,
check that the warning light turn off.
Interior
buzzerExterior
buzzerWarning
lightDetailsCorrection procedure
Once
The electronic key
is not detected
when an attempt
is made to start
the hybrid system.
Start the hybrid sys-
tem with the electronic
key present.
The “POWER”
switch has been
pressed while the
electronic key
was not detected
inside the vehicle.
Confirm the location
of the electronic key.
(P. 67, 74)
If the warning light
does not extinguish
even though the elec-
tronic key is within
operating range,
touch the electronic
key to the “POWER”
switch while depress-
ing the brake pedal
(P. 514)
Transmission
between the elec-
tronic key and the
vehicle is being
blocked, or the bat-
tery in the electronic
key has been
depleted.
Page 474 of 572
474 5-2. Steps to take in an emergency
PRIUS +_OM_OM47841E_(EE)
Interior
buzzerExterior
buzzerWarning
lightDetailsCorrection
procedure
Once
Driving has been
started without the
correct electronic
key inside the
vehicle.
Confirm the location
of the electronic key.
Once3 times
The electronic key
was carried out-
side the vehicle
and a door other
than the driver’s
door was opened
and closed while
the “POWER”
switch was in a
mode other than
off.
Bring the electronic
key back into the vehi-
cle.
The electronic key
was carried out-
side the vehicle
and the driver’s
door was opened
and closed while
the shift position P
was selected
without turning off
the “POWER”
switch.
Turn the “POWER”
switch off or bring the
electronic key back
into the vehicle.
Page 475 of 572
5
475 5-2. Steps to take in an emergency
When trouble arises
PRIUS +_OM_OM47841E_(EE)
Interior
buzzerExterior
buzzerWarning
lightDetailsCorrection
procedure
Contin-
uous
An attempt was
made to exit the
vehicle with the
electronic key and
lock the doors
without first turn-
ing the “POWER”
switch off.
Turn the “POWER”
switch off and lock the
doors again.
Contin-
uousContin-
uous
The electronic key
was carried out-
side the vehicle
and the driver’s
door was opened
and closed while
any shift position
other than P was
selected without
turning off the
“POWER” switch.
• Shift the shift position
to P.
• Bring the electronic
key back into the vehi-
cle.