2013 TOYOTA iQ EV tow

16
ELECTRIC VEHICLE SYSTEM
Start time vs. Finish time setting
Either start or finish time can be scheduled (they cannot be scheduled
simultaneously).
Start time setting
mode
Finish time setting
mode
Timer charging finishes when the traction battery is fully charged.
Charging starts at an unspecified time so that the battery will be fully charged
at approximately the scheduled finish time.
Cancelling the charging timer
If the charging timer switch is pressed while the charging timer indicator is
illuminated or flashing, the charging timer function will be canceled. However,
if the charging cable has already been connected to the vehicle, charging will
commence immediately.
The charging timer indicator will
turn off if the schedule is canceled.
Step 1 Pull the charging connector toward you while pressing the latch release button.
Step 2 Attach the charging connector cap.
Step 3 Close the charging inlet cap, and then close the recharge inlet door.
Step 4 Remove the plug from the outlet when the charging equipment will not be used for a long period of time.
After charging
2013Scion-iQ-EV.indd 161/14/13 6:49 PM

17
OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURESStart time vs. Finish time setting
Either start or finish time can be scheduled (they cannot be scheduled
simultaneously).
Start time setting
mode
Finish time setting
mode
Timer charging finishes when the traction battery is fully charged.
Charging starts at an unspecified time so that the battery will be fully charged
at approximately the scheduled finish time.
Cancelling the charging timer
If the charging timer switch is pressed while the charging timer indicator is
illuminated or flashing, the charging timer function will be canceled. However,
if the charging cable has already been connected to the vehicle, charging will
commence immediately.
The charging timer indicator will
turn off if the schedule is canceled.
Step 1 Pull the charging connector toward you while pressing the latch release button.
Step 2 Attach the charging connector cap.
Step 3 Close the charging inlet cap, and then close the recharge inlet door.
- Hold the body of the plug while removing.
- Make sure to put the cable away immediately after disconnecting.
- When leaving the plug inserted, check the plug and connector once a month
for accumulation of dirt or dust.
Step 4 Remove the plug from the outlet when the charging equipment will not be
used for a long period of time.
After charging
2013Scion-iQ-EV.indd 171/14/13 6:49 PM

Windshield wipers & washers
Front
Rear
Lights & turn signals
Turn signals
Headlights
Headlights
Parking lights
22
FEATURES/OPERATIONS
Seat adjustments-Front
Seat position (forward/backward)
Seatback angle
Seat-Folding down rear seat
(2) Push
Passenger
seat only
(1) Stow the seat belt buckles(3) Remove (4) Fold down
2013Scion-iQ-EV.indd 221/14/13 6:49 PM

31
OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
Emergency tire puncture repair kit
Refer to the Owner’s Manual for more details.
If tire pressure indicator is on, check/adjust each tire.
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or replaced, turn
the power switch to the “ON” mode and press and hold the “
SET” button until
indicator blinks three times. Let the vehicle sit for a few minutes to allow
initialization to complete.
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota or Scion dealer.
NOTE: The warning light may come on due to temperature changes or changes in
tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the light.
Towing eyeletEmergency tire
puncture repair kitIf belt is fully extended, then retracted even slightly, it cannot be re-extended
beyond that point, unless fully retracted again. This feature is used to help hold
child restraint systems securely.
To find more information about seat belts, and how to install a child restraint
system, refer to the Owner’s Manual.
Take up slack
SAFETY AND EMERGENCY FEATURES
2013Scion-iQ-EV.indd 311/14/13 6:50 PM