2013 TOYOTA iQ EV display

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
15
Use of the charging timer can suppress deterioration of the hybrid battery
(traction battery) and off-peak electricity can be used effectively.
Setting the charging timer
Step 1 Stop the vehicle and press the charging timer switch.
Step 2 Press and hold the charging timer switch.
Step 3 Press the charging timer switch to select the setting mode.
Step 5 Press and hold the charging timer switch.
Step 4 Adjust the set time using the time adjustment button.
Push knob to adjust hours/minutes
Turn knob to switch between
hours/minutes
Once set, the time display will
change from flashing to solid.
Step 6 Turn the POWER switch off.
The charging timer indicator will start flashing.
Step 7 Connect the charging cable to the vehicle.
Check that the charging indicator has come on. It will turn off after several
seconds. If the indicator does not come on, re-insert the charging connector. If it
still does not come on, check the power source status using the power indicator on
the CCID (Charging Circuit Interrupting Device).
2013Scion-iQ-EV.indd 151/14/13 6:49 PM

18
ELECTRIC VEHICLE SYSTEM
Remaining charging time Charging information is displayed on the
Multi-Information Display.
If the POWER switch is turned to ON mode during charging, the estimated amount
of time needed for charge completion will be displayed.
After confirming, switch the POWER switch to OFF to turn off the display. The
POWER switch will turn off automatically after approximately two minutes.
Multi-Information Display-Charging
information
Charging information and warning messages The first time the POWER switch is
turned to ON mode after charging is completed, a message detailing the results
of the charge is shown. Also, if an operation that cannot be carried out during
charging was attempted, a warning message will be shown.
Remote Climate Control
While charging with an external power source, the heater or Air Conditioning
can be operated before getting in the vehicle. If the Air Conditioning system is
remotely activated while charging, charging will stop but resume when the Air
Conditioning system goes off.
Before leaving the vehicle
The Remote Climate Control will operate in accordance with the temperature
settings of the Air Conditioning system, so be sure to check the settings before
leaving the vehicle.
Activating the Remote Climate Control
- Press and hold the “” button.
- The system will shut off if a door is opened. The system can be stopped by
pressing the “
” button twice.
2013Scion-iQ-EV.indd 181/14/13 6:49 PM

19
OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
Remaining charging time Charging information is displayed on the
Multi-Information Display.
If the POWER switch is turned to ON mode during charging, the estimated amount
of time needed for charge completion will be displayed.
After confirming, switch the POWER switch to OFF to turn off the display. The
POWER switch will turn off automatically after approximately two minutes.
Multi-Information Display-Charging
information
Charging information and warning messages The first time the POWER switch is
turned to ON mode after charging is completed, a message detailing the results
of the charge is shown. Also, if an operation that cannot be carried out during
charging was attempted, a warning message will be shown.
While charging with an external power source, the heater or Air Conditioning
can be operated before getting in the vehicle. If the Air Conditioning system is
remotely activated while charging, charging will stop but resume when the Air
Conditioning system goes off.
The Remote Climate Control will operate in accordance with the temperature
settings of the Air Conditioning system, so be sure to check the settings before
leaving the vehicle.
- Press and hold the “
” button.
- The system will shut off if a door is opened. The system can be stopped by
pressing the “
” button twice.
2013Scion-iQ-EV.indd 191/14/13 6:49 PM

Hold wheel, push lever down, set angle and return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Tilt steering wheel
Seat heaters
Light control-Instrument panel
24
FEATURES/OPERATIONS
Windows
Automatic operation Push the switch completely down or pull it completely
up and release to fully open or close. To stop window partway, lightly push the
switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
UpDown
Driver side
Window lock switch
Multi-Information Display
Turn “DISP” to scroll through the following:
(1) Driving range
(2) Average power consumption/Current power consumption
(3) After charge
(4) Electric component usage status
(5) Driving range (highway/city)
(6) Average vehicle speed/Elapsed time
(7) Traction battery information
(8) Screen settings
(9) Timer charging set (start/finish) time
(1)
(5)
(3)
(7) (2)
(6) (4)
(8) (9)
2013Scion-iQ-EV.indd 241/14/13 6:49 PM

Audio
Turn to tune stations or
select channel, track or
chapter
Seek station or
channel, or select
track, file or chapter
Display radio control
screen
Display media control
screen
Refer to the “Navigation System Owner’s Manual” for instructions and more
information.
Steering wheel switches
“ ”
Use to search within the selected audio medium (radio, CD, iPod ®
, etc.).
“MODE PWR”
Push to turn audio ON and select an audio mode. Push and hold to mute/
unmute or pause/resume the current operation.
Refer to the “Navigation System Owner’s Manual” for more details.>
26
Air Conditioning/Heating
Recirculate cabin air (fresh air when OFF)
Air Conditioning ON/OFF
Use fresh air to quickly cool interior, then change to recirculate for
cooler air.
Windshield airflow/defogger
“MAX” mode
Use this mode for quick warming or cooling.
Airflow vent*
In “
” and “” mode, use fresh air (“” indicator “OFF”) to reduce
window fogging.
Control dial
Fan speed*
Temperature selector*
Climate control OFF
Automatic climate control ON
Adjusting the temperature setting will cause the airflow vents, air intake
and fan to adjust automatically.
* Press the button and turn the control dial.
Refer to the Owner’s Manual for more details.
FEATURES/OPERATIONS
HWD (Heated Windshield Defroster)
This feature is used to defog the windshield.
2013Scion-iQ-EV.indd 261/14/13 6:50 PM

27
OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURESAudio
Turn to tune stations or
select channel, track or
chapter
Eject disc
Turn
ON/OFFSeek station or
channel, or select
track, file or chapter
Display “Setup” screen
Display radio control
screen
Display media control
screen
Refer to the “Navigation System Owner’s Manual” for instructions and more
information.
Steering wheel switches
“ ”
Use to search within the selected audio medium (radio, CD, iPod ®
, etc.).
“MODE PWR”
Push to turn audio ON and select an audio mode. Push and hold to mute/
unmute or pause/resume the current operation.
Refer to the “Navigation System Owner’s Manual” for more details.>>
Volume control
Recirculate cabin air (fresh air when OFF)
Air Conditioning ON/OFF
Use fresh air to quickly cool interior, then change to recirculate for
cooler air.
Windshield airflow/defogger
“MAX” mode
Use this mode for quick warming or cooling.
Airflow vent*
In “
” and “” mode, use fresh air (“” indicator “OFF”) to reduce
window fogging.
Control dial
Fan speed*
Temperature selector*
Climate control OFF
Automatic climate control ON
Adjusting the temperature setting will cause the airflow vents, air intake
and fan to adjust automatically.
* Press the button and turn the control dial.
Refer to the Owner’s Manual for more details.
This feature is used to defog the windshield.
2013Scion-iQ-EV.indd 271/14/13 6:50 PM