2013 TOYOTA iQ EV ECO mode

6
OVERVIEW
Keyless entry
Locking operationUnlocking operation
NOTE: If a door is not opened within
60 seconds of unlocking, all doors will
relock for safety.
PushPush ONCE: Driver door

TWICE: ALL doors
Panic button
Push and hold
Charging inlet
UnlockUnlock
Open
Open
Smart Key system
Start function
NOTE: Shift position must be in Park and brake pedal depressed.
Without depressing the brake pedal, pressing the “POWER” switch will change the
operation mode in succession from:
* Driver door unlocking function can be programmed to unlock driver door only, or all doors. Grasping passenger door handle or pushing the unlock button o\
n the back
door opener will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
Power (without starting EV System)
ACCESSORY
ON
OFF
Back door lock/unlock
Locking operation
Carry remote to lock
Carry remote
to lock/unlock
Push
Remote climate control
While charging with an external power source, the heater/air conditioning can be
operated before getting in the vehicle.
Push and hold
Normal charging inlet Quick charging inlet
(if equipped)
2013Scion-iQ-EV.indd 61/14/13 6:48 PM

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
7
Unlocking operation
NOTE: If a door is not opened within
60 seconds of unlocking, all doors will
relock for safety.
Unlock
Open
Smart Key system
Start function
NOTE: Shift position must be in Park and brake pedal depressed.
Push
Depress brake
pedal
Carrying
Without depressing the brake pedal, pressing the “POWER” switch will change the
operation mode in succession from:
* Driver door unlocking function can be programmed to unlock driver door only, or all doors. Grasping passenger door handle or pushing the unlock button o\
n the back
door opener will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
Power (without starting EV System)
Accessories such as the radio will operate.
Power ON; the EV System is not engaged.
All systems OFF.
ACCESSORY
ON
OFF
Back door lock/unlock
Locking operationUnlocking operation*
Carry remote to lock Carry remote to unlock
Grasp
Lock
Unlock
Carry remote
to lock/unlock
Green indicator ON
Touch
While charging with an external power source, the heater/air conditioning can be
operated before getting in the vehicle.
Quick charging inlet
(if equipped)
2013Scion-iQ-EV.indd 71/14/13 6:48 PM

12
Step 3 Press the recharge inlet door opener switch to open the recharge inlet

door.
Step 4 Open the charging inlet cap by releasing the clip.
Step 5 Remove the charging connector cap. Affix the cap to the cable.
Push to
open
ELECTRIC VEHICLE SYSTEM
The recharge inlet door will not open
when the “READY” indicator is on or
the power switch is in ON mode.
Step 6 Insert the charging connector into the charging inlet.
Guide
Step 7 Confirm that the charging indicator is illuminated. (When the charging
timer function is in use, the light will turn off several seconds after
illuminating.)
2013Scion-iQ-EV.indd 121/14/13 6:48 PM

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
13
Step 3 Press the recharge inlet door opener switch to open the recharge inlet
door.
Step 4 Open the charging inlet cap by releasing the clip.
Step 5 Remove the charging connector cap. Affix the cap to the cable.
The recharge inlet door will not open
when the “READY” indicator is on or
the power switch is in ON mode.
Step 6 Insert the charging connector into the charging inlet.
Guide
- Do not press the latch release
button when inserting the
connector.
- Align the guides and push connector in straight and firmly
until it clicks.
Step 7 Confirm that the charging indicator is illuminated. (When the charging
timer function is in use, the light will turn off several seconds after
illuminating.)
- Charging will not start if the charging indicator does not
illuminate when the charging
connector is inserted.
- The amount of time until charging is completed can be checked on
the Multi-Information Display by
turning the power switch to ON
mode.
- The charging indicator will turn off when charging is completed.
2013Scion-iQ-EV.indd 131/14/13 6:49 PM

14
ELECTRIC VEHICLE SYSTEM
Use of the charging timer can suppress deterioration of the hybrid battery
(traction battery) and off-peak electricity can be used effectively.
Setting the charging timer
Step 1 Stop the vehicle and press the charging timer switch.
Step 2 Press and hold the charging timer switch.
Step 3 Press the charging timer switch to select the setting mode.
Charging timer
The Multi-Information Display will
switch to the charging timer display.
The timing display will change from
solid to flashing.Start time setting mode
Finish time setting mode
The mode will switch with each
press of the charging timer switch.Step 5 Press and hold the charging timer switch.
Step 4 Adjust the set time using the time adjustment button.
Step 6 Turn the POWER switch off.
The charging timer indicator will start flashing.
Step 7 Connect the charging cable to the vehicle.
Check that the charging indicator has come on. It will turn off after several
seconds. If the indicator does not come on, re-insert the charging connector. If it
still does not come on, check the power source status using the power indicator on
the CCID (Charging Circuit Interrupting Device).
2013Scion-iQ-EV.indd 141/14/13 6:49 PM

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
15
Use of the charging timer can suppress deterioration of the hybrid battery
(traction battery) and off-peak electricity can be used effectively.
Setting the charging timer
Step 1 Stop the vehicle and press the charging timer switch.
Step 2 Press and hold the charging timer switch.
Step 3 Press the charging timer switch to select the setting mode.
Step 5 Press and hold the charging timer switch.
Step 4 Adjust the set time using the time adjustment button.
Push knob to adjust hours/minutes
Turn knob to switch between
hours/minutes
Once set, the time display will
change from flashing to solid.
Step 6 Turn the POWER switch off.
The charging timer indicator will start flashing.
Step 7 Connect the charging cable to the vehicle.
Check that the charging indicator has come on. It will turn off after several
seconds. If the indicator does not come on, re-insert the charging connector. If it
still does not come on, check the power source status using the power indicator on
the CCID (Charging Circuit Interrupting Device).
2013Scion-iQ-EV.indd 151/14/13 6:49 PM

20
* The power switch must be in the “ON” mode and the brake pedal depressed to
shift from Park.
Downshifting increases power going uphill, or provides regenerative braking
downhill. For best power economy during normal driving conditions, always drive
with the shift lever in the “D” position.
FEATURES/OPERATIONS
Transmission
Parking brake
ELECTRIC VEHICLE SYSTEM
In the unlikely event that the electrical leakage detection function is not
operating properly, contact your Toyota or Scion dealer as soon as possible.
Check that it is operating properly by following the procedure below.
Step 1 Insert the charging cable into the outlet of the external power source.
Step 2 Press the test button on the CCID (Charging Circuit Interrupting Device).
If the error warning indicator
illuminates when the test button
is pressed, the function is
operating correctly.
Step 3 Press the reset button on the CCID (Charging Circuit Interrupting Device).
Check that the error warning indicator turns off. Charging cannot be carried out
while the error warning indicator is illuminated.
Charging can be continued by following the normal procedure. Store the charging
cable when not in use.
See the Owner’s Manual for important precautionary information.
Inspecting electrical leakage
detection function
2013Scion-iQ-EV.indd 201/14/13 6:49 PM

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
21
* The power switch must be in the “ON” mode and the brake pedal depressed to
shift from Park.
Downshifting increases power going uphill, or provides regenerative braking
downhill. For best power economy during normal driving conditions, always drive
with the shift lever in the “D” position.
FEATURES/OPERATIONS
Transmission
Parking brake
Pull(2) Push
(1) Pull slightly
(3) Lower
Park*
Reverse
Neutral
Drive
P
R
N
D
N
SRegenerative brake
Maximum
regenerative brakeB
Release
Set
In the unlikely event that the electrical leakage detection function is not
operating properly, contact your Toyota or Scion dealer as soon as possible.
Check that it is operating properly by following the procedure below.
Step 1 Insert the charging cable into the outlet of the external power source.
Step 2 Press the test button on the CCID (Charging Circuit Interrupting Device).
Step 3 Press the reset button on the CCID (Charging Circuit Interrupting Device).
Check that the error warning indicator turns off. Charging cannot be carried out
while the error warning indicator is illuminated.
Charging can be continued by following the normal procedure. Store the charging
cable when not in use.
See the Owner’s Manual for important precautionary information.
2013Scion-iQ-EV.indd 211/14/13 6:49 PM