2013 TOYOTA HILUX automatic transmission

164 2-1. Driving procedures
HILUX_OM_OM0K134E_(EE)
Turning the key from “ACC” to “LOCK”
Shift the shift lever to P (automatic transmission) or N (manual
transmission). (P. 166, 170)
If the engine does not start
The engine immobilizer system may not have been deactivated. (P. 102)
When the steering lock cannot be released
Key reminder function
A buzzer sounds if the driver’s door is opened while the engine switch is in
the “LOCK” or “ACC” position to remind you to remove the key.
STEP1
Push in the key and turn to the “LOCK”
position.STEP2
When starting the engine, the engine
switch may seem stuck in the “LOCK”
position. To free it, turn the key while turn-
ing the steering wheel slightly left and
right.

166
2-1. Driving procedures
HILUX_OM_OM0K134E_(EE)
Automatic transmission
: If equipped
Select a shift position appropriate for the driving conditions.
Shifting the shift lever
While the engine switch is in the “ON” position, move the
shift lever with the brake pedal depressed.
When shifting the shift lever between P and D, make sure that the
vehicle is completely stopped.

182 2-2. Instrument cluster
HILUX_OM_OM0K134E_(EE)
Indicators
The indicators inform the driver of the operating state of the
vehicle’s various systems.
Turn signal indicator
(P. 173)
(if equipped)
Slip indicator
(P. 222)
Headlight high beam
indicator (P. 191)
(if equipped)
VSC OFF indicator
(P. 222)
(optitron type
meters)
Tail light indicator
(P. 191)
(4WD models)
Four-wheel drive
indicator(P. 212)
(if equipped)
Front fog light indicator
(P. 195)
(if equipped)
Rear differential lock
indicator (P. 217)
Rear fog light indicator
(P. 196)
(automatic
transmission)
Shift position indicators
(P. 166)Engine preheating
indicator (P. 162)
(if equipped)
Cruise control indicator
(P. 202)
*1, 2
*1
*1

207
2-4. Using other driving systems
2
When driving
HILUX_OM_OM0K134E_(EE)
Rear view monitor system
: If equipped
The rear view monitor assists the driver by displaying an image of
the area behind the vehicle while reversing. The image is displayed
in reverse on the screen. This reversed image is a similar image to
the one on the inside rear view mirror.
The rear view image is dis-
played when the shift lever is
in the R position.
Vehicles with automatic
transmission
Vehicles with manual trans-
mission
If the shift lever is shifted out of
R, the screen returns to the
previous one.

214 2-4. Using other driving systems
HILUX_OM_OM0K134E_(EE)
A.D.D. (automatic disconnecting differential) (if equipped)
The A.D.D. can be engaged or disengaged by the shifting operations
described in the following shifting procedures.
Shifting between H2 and H4
Shifting from H2 to H4
Reduce your speed to less than 80 km/h (50 mph).
Move the front drive control lever.
Shifting from H4 to H2
Simply move the front drive control lever.
In both cases, you need not depress the clutch pedal. (manual transmission)
Shifting between H4 and L4 (automatic transmission)
Stop the vehicle.
Shift the shift lever to N.
Move the front drive control lever.
STEP1
STEP2
STEP1
STEP2
STEP3

215 2-4. Using other driving systems
2
When driving
HILUX_OM_OM0K134E_(EE)
Shifting between H4 and L4 (manual transmission)
Shifting from H4 to L4
Stop the vehicle or reduce your speed to less than 8 km/h
(5 mph).
With your foot off the accelerator pedal, depress the clutch
pedal.
Move the front drive control lever.
Shifting from L4 to H4
Depress the clutch pedal.
Move the front drive control lever.
Four-wheel drive usage frequency (vehicles with A.D.D.)
You should drive in four-wheel drive for at least 16 km (10 miles) each
month.
This will assure that the front drive components are lubricated.
Shifting between H2 and H4
If you have trouble shifting in cold weather, reduce your speed or stop the
vehicle and reshift.
If the four-wheel drive indicator does not go off when you shift from H4 to
H2, drive straight ahead while accelerating or decelerating, or drive in
reverse.
Shifting to L4 (vehicles with VSC)
VSC is automatically turned off.
STEP1
STEP2
STEP3
STEP1
STEP2

216 2-4. Using other driving systems
HILUX_OM_OM0K134E_(EE)
CAUTION
While driving
Never shift the front drive control lever from H2 to H4 if the wheels are slip-
ping. Stop the slipping or spinning before shifting.
For normal driving on dry and hard surface roads, use H2 position. Driving
on dry and hard surface roads in H4 or L4 position may cause drive com-
ponent oil leakage, seizure, or other problems resulting in an accident.
Further, it may cause tire wear and increased fuel consumption.
Avoid turning suddenly in H4 or L4 position. If you do turn suddenly, the
difference in turning speeds between the front and rear wheels may have
a similar effect to braking, thus making driving difficult.
Securely shift the front drive control lever to H4 or L4. Otherwise, the
transfer may disengage both the front and rear driveshafts from the power-
train and allow the vehicle to move regardless of the shift position. If this
happens, the vehicle may be free to roll even if the automatic transmission
is in P.

218 2-4. Using other driving systems
HILUX_OM_OM0K134E_(EE)
Using the rear differential lock system
Automatic transmission
4WD models only: Before using the rear differential lock sys-
tem, try shifting the front drive control lever into L4. If this is
not sufficient, use the rear differential lock system as well.
Be sure to stop the wheels.
Press the rear differential lock switch.
Gently depress the accelerator pedal.
After the rear differential is locked, the indicator will come on.
Unlock the rear differential as soon as the vehicle moves.
Manual transmission
4WD models only: Before using the rear differential lock sys-
tem, try shifting the front drive control lever into L4. If this is
not sufficient, use the rear differential lock system as well.
Be sure to stop the wheels.
Depress the clutch pedal.
Press the rear differential lock switch.
Slowly release the clutch pedal.
After the rear differential is locked, the indicator will come on.
Unlock the rear differential as soon as the vehicle moves.
STEP1
STEP2
STEP3
STEP4
STEP1
STEP2
STEP3
STEP4
STEP5