2013 TOYOTA FR-S phone

6
6
Using BeSpoke's Voice
Recognition
Touch [] to activate function con-
trol using your voice.
Start talking after the beep stops.
The following voice commands are
available:
Playing Internet radio.
Getting Status Updates ( Twitter/
Facebook)
Sending direct messages
Searching for friends
Searching for POIs
Searching for routes
A Bluetooth connection is needed in
order to use voice control. Refer to
Connecting a Bluetooth Cell Phone
(page 55) for details on Bluetooth
connections.
If a Bluetooth audio device instead
of iPhone is connected, Voice
Recognition may not work properly.
If so, please connect the iPhone
only.
* Touch [] on your iPhone
and then use [Help] to check
the operating procedures for
each icon. (When iPhone is
disconnected.)
•
*
Fo r m
ore details, please visit our
website at
w w w.Scion.com/BeSpoke.
* Fu n

ctions and operation
procedures may dif fer depending
on the version of the application
being used.
NOTE
You cannot change to hands-
free phoning by touching
[HandsfreeMode], when the
source is BeSpoke.
Select another source to change
to hands-free phoning(Bluetooth
phone).
Refer to Settings You Can
Establish While Using the Phone
(page 59) for details on hands
free mode.

51
51
Formatting/not formatting personal
data recorded on the system
After touching [Delete Personal
Data], touch either [Delete] or [Do
Not Delete].
[Delete]Deletes personal data
that has been recorded in
the system as following:
- Th e s

ource type that
was last played back
- Th e l

ast volume setting
used
- Ea c

h setting value for
the radio source
- Th e p

reset content of
the radio source
- Ea c

h setting value for
the sound settings
- Ea c

h setting value for
the system settings
- Ea c

h setting value
for the contrast &
brightness
- Ea c

h setting value for
the Bluetooth settings
- Th e c

ontacts, speed
dials and call history for
hands-free phoning
[Do Not
Delete]Returns to the General
Settings menu without
deleting personal data
that has been recorded in
the system.
Setting Up Voice Guidance
(For Phone)
Touch on [Voice] on the Setup menu
to display the Voice Settings menu.
Next touch on the settings that fol-
low to establish them.
You can set this item, when the
microphone is connected.
Changing the voice output level
Touch one of the following.
[1] -[7] Establishes the voice output level of Voice
Guidance. The lower
the setting number,
the lower the voice
output level and the
higher the setting
number, the higher the
voice output level
Setting up/not setting up voice
guidance
After touching [Voice Recognition
Prompts], touch either [ON] or [OFF].
[ON] With this setting, Voice Guidance is activated.
[OFF] With this setting, Voice Guidance is not
activated.
Returning the Voice Guidance
v oi c

e output level to Level 
Touch [Default].
• Setting Up Bluetooth
Touch on [Bluetooth] on the Setup
menu to display the Bluetooth
Settings menu. Next touch on the
settings that follow to set them up.
Connecting/disconnecting
registered Bluetooth devices
Touch on [Registered Bluetooth
Device] to display a list of the
Bluetooth devices that have been
registered. Touch one of the follow-
ing.
[Add New] Registers the
Bluetooth device.
[Remove] Excludes the selected Bluetooth device from
the list.
[Detail] With this setting, information regarding
the selected Bluetooth
device is displayed.
•

5
5
Bluetooth Audio Player
Touch on [Connect Audio Player] to
display a list of the Bluetooth audio
players that have been registered.
Touch one of the following.
[Add New] Registers the Bluetooth device.
Establishing the detailed
Bluetooth settings
Touch on [Detailed Bluetooth
Settings] on the Bluetooth Settings
menu and then touch on the settings
that follow to set them up.
[Bluetooth
Power][ON] Turns the Bluetooth
power on.
[OFF] Turns the Bluetooth
power off.
[Passcode]This enables you to
change the Passcode for
connecting the
Bluetooth device and the
Passkey. After touching,
enter a four- digit number
and touch [OK].
[Display
Audio
Player
Status][ON]With this setting,
the current status
of the Bluetooth
Audio Player
connection is
displayed.
[OFF]With this setting,
there is no
display of the
current status
of the Bluetooth
Audio Player
connection.
Connection Method
[]
d [Bluetooth] d [Registered
Bluetooth device] d [Details] d [ ] d
Touch [Connection Method] and then touch
one of the following options:
[From Vehicle]: Start the connection
procedures using the system.
[From Audio Player]: Start the
connection procedures using the
Bluetooth audio device.
Connection procedures are normally
carried out automatically, but for
some Bluetooth audio devices, you
will need to change the connection.
For more information, see the
instruction manual for your Bluetooth
audio device.
Setting Up the System
Touch [System] on the Setup menu
to display the SYSTEM Settings
menu and then touch on the settings
that follow to set them up.
Utilizing/Not utilizing the sub-
woofer
Touch [Subwoofer Setting] and then
touch [ON] or [OFF].
[ON] With this setting, the subwoofer is activated.
[OFF] With this setting, the subwoofer is not
activated.
Setting Up the Vehicle Type
Touch [Type of Vehicle Setting] and
then touch one of the following.
[xB] Sets the vehicle type to xB
[xD] Sets the vehicle type to xD
[tC] Sets the vehicle type to tC
[iQ] Sets the vehicle type to iQ
[FR-S] Sets the vehicle type to FR-S
Setting Up Hands-Free Phoning
Touch [Phone] on the Setup menu to
display the menu for phone settings.
For information regarding [Phone],
refer to Setting Up the Phone (page
60).
•
•
•

55
55
Establishing the SSP (Scion
Sound Processing) Mode
SSP is a modified DSP (Digital Signal
Processing) system that provides a
customized sound for your vehicle.
Touch [SSP] on the Sound Settings
menu to display the SSP Settings
Menu. Touch [SSP Settings] and
touch one of the following to estab -
lish the SSP mode.
[SSP
Natural]Natural and smooth
sound that gives no
listening fatigue but
comfort.
[SSP Hear] A powerful, energetic, live sound.
[SSP Feel] Reproduces the sound on the stage that
musicians hear.
For more details, please visit the
SCION website at
http://www.scion.com/.
•Connecting a
Bluetooth Cell Phone
You can connect a Bluetooth
enabled cell phone to the system
and enjoy hands-free phoning.
You can also use your cell phone
for regular calls with the Bluetooth
connection.
WARNING
Before connecting the cell
phone, always stop your car in a
safe location.
NOTICE
A Bluetooth enabled cell
phone that supports the HFP
profile is required for the
operations explained here.
Make sure and verif y that the
battery is suf ficiently charged
before connecting the cell
phone.
Even when using a cell phone
that has been connected as a
Bluetooth audio player, you will
need to carry out the following
connection procedures for
hands-free phoning.
•
•
•

56
56
For the most part, you will be using
your Bluetooth cell phone to register
the cell phone to the system. For
more information, see the instruction
manual for your cell phone.
1. To

uch [
] d [Bluetooth] d
[Connect Phone] d [Add new].
Phone 01
Phone 02
You can connect up to five
Bluetooth enabled cell phones
and Bluetooth audio players to the
system. If five or more devices
have already been connected, you
will need to cancel some of these
connections. You can accomplish
this by touching on the device(s)
that you want to cancel.
2 . U s

ing your cell phone, search for
a Bluetooth enable device that can
be connected, and then select the
system. 3
. Fo
rward the passcode that
appears on the screen from your
cell phone.
If the p

asscode has been sent
properly, the cell phone will be
connected to the system.
Sending your pass key for registration
1. To

uch [] d [Bluetooth] d
[Connect Phone] d [Add New].
If a device has already been
connected, a screen will appear
seeking confirmation of whether
this connection is to be canceled
or not. Touch [YES].
2 . U s

ing the Bluetooth cell phone,
search for the Bluetooth enabled
device and then select this unit
([CAR MULTIMEDIA]).
3. Se

nd the Passkey that appears on
the screen from the Bluetooth cell
phone to the system.
If th e P

asskey has been sent
correctly, Bluetooth cell phone will
register it to the system and it will
be connected.
Registering via SSP (Secure
Simple Pairing)
1. To

uch [] d [Bluetooth] d
[Connect Phone] d [Add New].
If a device has already been
connected, a screen will appear
seeking confirmation of whether
this connection is to be canceled
or not. Touch [YES]. 2
. U s
ing the Bluetooth cell phone,
search for the Bluetooth enabled
device and then select this unit
([CAR MULTIMEDIA]).
• For some types of devices and
authentication methods, number
authentication or other means of
verification may be required.
• Blu

etooth 2.0 or higher is required.

57
57
Using Hands-Free
Phoning
Explanations regarding how to use
hands-free phoning appear below.
You will be able to maintain direct
control of your cell phone even
when using hands-free phoning.Making Calls
Touch [] to display the Phone
screen. You can make outgoing calls
using the PHONE screen.
* This is the same as pressing [(Off Hook)] on the steering switch.
When the phone and the micro -
phone are not connected, it is not
possible to make a call.
Dialing phone numbers
Make phone calls by touching on the
number keypads on the screen to
dial phone numbers.
Dial phone numbers by touching on
the number keypads and then touch-
ing [
] on the Phone screen.Touch [ ] to cancel the previous
number.
•

58
58
Making calls to selected Speed
Dial numbers
The Speed Dial function allows you
to quickly call up frequently dialed
phone numbers.
You can make calls by selecting num-
bers registered on Speed Dial. You
must first register the phone number
to Speed Dial. For more information,
see Registering telephone numbers
on Speed Dial on page 62.
1. To

uch [Speed Dial] on the Phone
screen.
2. To

uch on any Speed Dial number
that has been registered.
* Speed Dial consists of [Speed Dial1] -
[Speed Dial3], which are further
divided up into six numbers each.
Touch on [Speed Dial1] - [Speed
Dial3] to toggle between the tabs.
* Tou

ch [Options] to edit the Speed
Dial entries. For more information,
refer to Editing Speed Dial Entries on
page 62.
Making calls to numbers selected
from the call history
You can make calls by selecting
phone numbers from the call history.
1. To
uch [Call History] on the Phone
screen.
2. To

uch a phone number on Call
History, and then touch [
].
* Touch [Add Speed Dial] after touch-
ing on a number to register this
phone number to Speed Dial.
* Tou

ch [All] to display the history of
all calls.
* To u

ch [Missed] to display the history
of missed calls.
* To u

ch [Incoming] to display the histo -
ry of incoming calls; touch [Outgoing]
to display the history of outgoing
calls.
* To u

ch [Delete] to select phone num-
bers to delete from the Call History.
Touch [All Delete] to delete all phone
numbers.
Making calls to selected contacts
Contacts includes data such as
phone numbers and names that are
imported from the address book of
the cell phone to the system. To use
Contacts, you must first import the
cell phone data – which will function
as contact information – to the sys-
tem. (Refer to Editing Contacts on
page 61.)
1 . To

uch [Contacts] on the Phone
screen.
2. To

uch the desired person’s name
on the Contacts screen.
* Touch [ Transfer] to import the
Contacts. (Refer to page 61.)
* Tou
ch [Options] to edit Contacts and
Speed Dial numbers.
* To u

ch the group of letters on the
right to display the corresponding
names.
3. If more than one number has
been registered for this person,
touch one of the numbers and
then touch [
].

59
59
Taking Phone Calls
The following screen appears when
a call comes in.
[]Use to answer the
phone.
[
] Use to hang up
without answering the
phone.
[Volume] Use to adjust the ring volume. Touch [+] to
increase the volume;
touch [–] to decrease
the volume.
The Steering Switch (On Hook/
Off Hook) and Microphone
After connecting the hands-free
device, you can use the steering
switch for simple hands-free phoning
operations.
(Off Hook)When there are no
calls, press this button
to display the Phone
screen.
Press to answer
incoming phone calls.
When the phone is set
to Call Waiting and a
call comes in while you
are on the phone, use
this to toggle between
the calls.
(On Hook)
Press this button to
avoid incoming calls.
Press to hang up
during a call.
You don’t need to talk directly into
the microphone; your voice will
successfully reach the microphone
when you talk in a normal, sitting
position as you drive.
• Settings You Can Establish
While Using the Phone
When you are on the phone, the fol-
lowing screen appears.
[]When the phone
device is set up for
call waiting and a call
comes in on another
line, use this function
to swi
tch to this other
call.
[] Hangs up the phone.
*
Th i
s is the same as
pressing [On Hook]
on the steering
switch.
[Volume] Adjusts the call volume. Touch [+] to
increase the volume;
touch [–] to decrease
the volume.
•