2013 TOYOTA FR-S display

7
7
Basic Operation
Your audio system works when the
ignition switch is in the “ACC” or
“ON” position.
If the Audio screen does not
display, press [POWER]. (Refer to
page 8.)
NOTICE
To avoid draining the battery,
do not leave the car audio on
longer than necessary when the
engine is not running.
Audio operations are carried out by
either of the operations explained
below. The touch keys on the Display
screen, touch buttons or the
POWER/MULTI KNOB (Refer to
page 8)
The Steering Switch (Refer to
page 9)
The Display screen touch keys,
touch buttons and POWER/MULTI
KNOB are used by way of example
when explaining operations in this
manual. •
•

8
8
The Operations of the Keys Near
the Display
1 Touch buttons
Your audio system is equipped with
the following buttons.
Use this button for
hands-free phoning and
voice operations. These
operations are not covered
in this manual, which
is dedicated to audio
operations.
If you touch this button
when the SETUP or
HANDS - FREE PHONING
screens are displayed, the
system will switch over
to the Source Operations
screen that is being
selected.
Use this button to create
a variety of audio settings.
(Refer to page 49.)
Use these buttons for
playback and signal
reception operations. The
exact operations depend
on the source. Refer to
the operations procedures
for the source.
•Touch this button to pause
playback and to mute the
sound. Touch it again to
resume playback and turn
the sound back on. The
exact operations depend
on the source. Refer to
the operations procedures
for the source.
Each time you touch this
button, the functions of
the MULTI KNOB and
POWER button change as
indicated below.
MULTI KNOB function:
volume adjustment 
AM/FM/SAT frequency
adjustment or cursor
operations of the list
screen.
POWER button function:
POWER on/off 
determination processing.
2 EJECTPress to eject the disc.
3 Disc insertion/ejection slotThis is where you insert and eject
discs.
4 DisplayInformation and images regarding
the source being played back are dis-
played here.
The key to be displayed varies
depending on the source that is
being selected.
5 POWERPress this when adjusting the vol-
ume and to turn the system power
OFF and ON. Also used as the selec-
tor button when CD tracks and other
information is displayed in list form.
6 MULTI KNOB
By touching on [], you can switch
between the functions below. When
in Tune/Scroll mode, the lights that
surround the MULTI KNOB blink on
and off.
VOLUME Turn the MULTI KNOB to
raise/lower the volume
levels.
Tune/
Scroll Turn the MULTI KNOB to
tune or scroll.
MULTI KNOB operation varies
depending on the audio source or
Menu. (Refer to page 14.)

1
1 
Common Operation
Although the keys displayed for
each source vary, the common
functions for each source are
indicated below.
Refer to Sound Quality Settings
(Setting Up the Sound Quality)
(page 53) to find out more about
establishing the sound quality.
Changing the Source
Touch [Source] to display the Source
Selection screen. Touch the desired
source.
FM – BeSpoke – USB or iPod – Pandora
– Disc (CD, MP3, or WMA) – Bluetooth audio
– SAT (XM Satellite Radio) – AM
•
BeSpoke

15
15
Refer to Listening to the RADIO (page
16) for details on using FM/HD Radio
broadcast / XM Satellite Radio.
Refer to Listening to the HD Radio
broadcast (page 20) for details on
using the unique features of the XM
Satellite Radio.
Refer to Listening to a CD (page 24) for
details on listening to CDs.
Refer to Listening to a MP3/ WMA
Disc and USB Portable Audio Player/
USB Memory (page 26) for details
on listening to MP3/ WMA discs, and
using USB portable audio players and
memory.
Refer to Listening to the iPod (page 33)
for details on listening to an iPod.
Refer to Listening to the Bluetooth
Audio (page 36) for details on listening
to Bluetooth audio.
Refer to Listening to Pandora
® internet
radio (page 40) for details on listening
to Pandora.
Refer to Using BeSpoke (page 4 4) for
details on using BeSpoke.
Adjusting the Volume
Turn the MULTI KNOB to the left
to turn the volume down and to the
right to turn the volume up.
When songs or stations change
without any change in the volume,
carry out the operations above after
touching
[].
• Setting up the audio
Touch on [] to display the SOUND
SET TINGS MENU. (Refer to page
53).
Delete the Audio Screen
If you press [POWER], the display will
disappear and the screen will change
to black. If you press it again, the
source screen that is being selected
will be displayed. If the display does
not disappear, press [POWER] after
touching on [
].
•
•

17
17
Changing the Frequency
Manually
Touch [] and then, after chang-
ing the MULTI KNOB to Tune/Scroll
mode, turn the MULTI KNOB to the
right to increase the frequency and
to the left to decrease the frequency.
• If the volume fluctuates, touch []
to change to the Tune/Scroll mode,
where you can change the frequency.
Searching for Frequencies That
Can Be Tuned In
Touch either [] or [] to search
in either ascending or descending
order for stations that can be tuned
in. When a station is detected, that
station will be tuned in.
If you press down on either of these
for 1.5 seconds or longer, even with
frequency loops, the SEEK function
continues to operate (Non-stop SEEK
function). If you release either during
operations of the Non-Stop SEEK
function, the SEEK function will take
over.
For FM, the PT Y select function is
activated when the PT Y genre is
established. However, when the
Non-Stop SEEK function is active,
the PT Y selection function is can-
celed.
•
• Listening to Preset Channels
Touch [Presets] to display the Preset
screen. Touch on any channel
from 1 to 6 on the Preset screen.
Frequencies recorded on the preset
channel will be tuned in.
Touch [>>] to switch the display to the
next preset page, and [<<] to switch
the display to the previous preset
page.
The pages change in the order of AM
d FM1
d FM2 d SAT1 d SAT2 d
SAT3 ( d Return to AM). (SAT is only
displayed when the SAT unit is con-
nected.)
Recording the current frequency
on the preset channel
Touch any channel from 1 to 6 on
the Preset screen, continuing to
touch the channel for 1.7 seconds or
longer.
NOTICE
You can store up to 6 stations
per band.
Temporarily Muting the Sound
Touch [] to temporarily mute the
sound. Touch [] to resume audio
output.
•
•
• Searching for Frequencies That
Can be Tuned In (Only for FM/
HD Radio / XM Satellite Radio)
Touch [SCAN] to search for frequen-
cies that can be tuned in. Audio
output will be produced in 5 -second
snippets for stations that have been
located. If you touch on [SCAN]
again during the time of the audio
output from the station you want to
listen to, that station will be tuned in.
When setting the PT Y genre, audio
from stations applicable to the PT Y
genre that has been set up is output
continuously in 5 -second snippets. If
you again touch [SCAN], the broad -
cast being output will continue to be
tuned in and you will be able to select
a PT Y genre. If you loop the search for
stations without touching [SCAN], a
beeping sound will be emitted and the
last radio station to be picked up will
be tuned in and then you will be able
to select a PT Y genre (Only for XM
Satellite Radio). Audio broadcasts cor-
responding to the current categories
are continuously output in 5 -second
snippets. If you touch [SCAN] again,
you will continue to receive the broad-
cast being output. If you loop the
detection of stations without touching
[SCAN], you will hear a beeping sound
and the last station to be received will
be tuned in.
•

18
18
Searching for, and listening to
broadcasts of preferred genres
(Only for FM/HD Radio)
Each time you touch [Options] d
[], the various PT Y
genres will flash on and off. If you
touch on the genre that you want to
listen to while the PT Y genres are
flashing on and off, the system will
search stations that can be tuned in
and which offer broadcasts corre -
sponding to the PT Y genres that you
are interested in.
Each time you touch [ [ T YPE>], the PT Y genre display chang-
es cyclically.
Searching for, and listening to
broadcasts of preferred genres
(Only for XM Satellite Radio)
Touch [Options] d [ [T YPE>] to search for stations that
can be tuned in and which offer
broadcasts corresponding to the cat-
egories that have been set up.
Setting Up the RBDS Message
Display (Only for FM)
Each time you touch [Options] d [FM
Info], the RBDS message display tog-
gles between ON and OFF.
•
•
•

1
1
(MPS)
(MPS)
(MPS)
(SPS)
(SPS)
Program Service Data: Contributes to the
superior user experience of HD Radio
Technology. Presents song name, artist,
station IDs, HD2/HD3 Channel Guide, and
other relevant data streams.
Adjacent to traditional main stations are extra
local FM channels. These HD2/HD3 Channels
provide new, original music as well as deep
cuts into traditional genre.
iTunes® Tagging provides you the opportunity
to discover a wide range of content and the
means to “tag” that content for later review
and purchase from the iTunes
® Store
Storing Song Information that
is Being Tuned In on HD Radio
Broadcast
If you touch [Tag] while the HD Radio
broadcast signal is being received,
the tag information of the song that
is being broadcast is stored.
Sometimes when songs are being
toggled and the like, tag information
cannot be accessed very effectively or
multiple tags are recorded.
Viewing HD Radio Broadcast
Text Information
Touch [Text] to display the Text Display
screen, where music, title, artist
name, album title and genre name are
displayed.
Touch [Additional Information] to dis-
play the Additional Information screen.
Touch [
] or [] to scroll the page.
Touch [
] to return to the HD Radio
Screen.
Setting up the HD Radio
Broadcast Reception Method
Touch on [HD Radio] to switch over
to analog mode and tune in analog
broadcasts. Touch [HD Radio] again
to switch over to digital mode and
tune in digital broadcasts.
Multicast Channel Support
When receiving the HD Radio
Broadcast signal and tuning in a
Multicast Channel-supported broad-
•
•
•
•cast in something other than analog,
the following actions will occur each
time you touch on [Multicast].
When receiving
MPS signal The next SPS is
tuned in.
When receiving
SPS signal The next SPS is
tuned in.
When receiving
last SPS MPS is tuned in.
NOTICE
When an analog station is
received, tuning down operation
is conducted within the analog
broadcasting. (
6d 2)
If a digital broadcast is not yet
received, tuning-up operation
tunes in the next analog station.
( 2 d 6)•
•

3
3
NOTICE
An additional Genuine Toyota
satellite receiver and antenna
must be purchased and installed
to listen to Satellite radio
broadcast in your vehicle.
NOTICE
An XM Satellite Radio sub-
scription is required to listen to
Satellite radio in your vehicle.
CAUTION
This XM tuner supports Audio
Services (Music and Talk) of
only XM Satellite Radio and
*Text Information linked to the
respective Audio Service.
*Text Information includes,
Station Name, (Artist) Name,
(Song) Title and Category
Name.
Sirius XM Satellite Radio
Inc. is solely responsible for
providing services over the air
to XM receivers.
•
•
CAUTION
This XM tuner is awarded
a Type Approval Certificate
from XM Satellite Radio Inc.
as a proof of compliance for
the services XM Satellite
Radio provides.
•
How to subscribe to
XM Satellite Radio

NOTICE
All fees and programming
are the responsibility of XM
Satellite Radio and are subject
to change.
Listeners can subscribe by visiting
the website at
w w w.siriusxm.com or by calling
Listener Care toll-free at
(86 6

)-635- 3  9.
Customers should have their
RADIO ID ready. Display the RADIO ID
Each XM tuner is identified with a
unique RADIO ID. You will need the
Radio ID when activating XM service
or when reporting a problem.
How to display RADIO IDIf you select CH 000, the ID
Code is displayed.
Select the Channel Number
zero (000) by turning the MULTI
KNOB or pressing it to the lef t
or right.
The RADIO ID is displayed as 8
alphanumeric characters.
Record your ID Code below
ID CODE ___ ___ ___ ___ ___ ___ ___ ___
NOTICE
If you select another Channel,
display of the ID Code is
canceled.
•