7-18
INSPECTION AND MAINTENANCE
53MH0-74E
Brakes
Brake Fluid
53M-09-028
Check the brake fluid level by looking at
the reservoir in the engine compartment.
Check that the fluid level is between the
“MAX” and “MIN” lines. If the brake fluid
level is near the “MIN” line, fill it up to the
“MAX” line with MARUTI GENUINE
BRAKE FLUID (MGBF).NOTE:
With disc brakes, the fluid level can be
expected to gradually fall as the brake
pads wear.
Brake Pedal
Check if the brake pedal stops at the regu-
lar height without “spongy” feeling when
you depress it. If not, have the brake sys-
tem inspected by your MARUTI SUZUKI
dealer. If you doubt the brake pedal for the
regular height, check it as follows:
EXAMPLE
WA R N I N G
Failure to follow the guidelines below
can result in personal injury or seri-
ous damage to the brake system.
• If the brake fluid in the reservoir
drops below a certain level, the
brake warning light on the instru-
ment panel will come on (the
engine must be running with the
parking brake fully disengaged).
Should the light come on, immedi-
ately ask your MARUTI SUZUKI
dealer to inspect the brake system.
• A rapid fluid loss indicates a leak in
the brake system which should be
inspected by your MARUTI SUZUKI
dealer immediately.
• Do not use any fluid other than
MARUTI GENUINE BRAKE FLUID
(MGBF) brake fluid. Do not use
reclaimed fluid or fluid that has
been stored in old or open contain-
ers. It is essential that foreign parti-
cles and other liquids are kept out
of the brake fluid reservoir.
CAUTION
Brake fluid can harm your eyes and
damage painted surfaces. Use cau-
tion when refilling the reservoir.
WA R N I N G
Brake fluid is harmful or fatal if swal-
lowed, and harmful if it comes in con-
tact with skin or eyes. If swallowed,
do not induce vomiting. Immediately
contact a poison control center or a
physician. If brake fluid gets in eyes,
flush eyes with water and seek medi-
cal attention. Wash thoroughly after
handling. Solution can be poisonous
to animals. Keep out of the reach of
children and animals.
11-1
SPECIFICATIONS
53MH0-74E
11
SPECIFICATIONS
NOTE:
Specifications are subject to change without notice.
ITEM: DimensionsUNIT: mm
ALTO 800 ALTO K10
Overall length 3430 3545
Overall widthWith Body Side Molding 1515 1515
Without Body Side Molding 1490 1490
Overall height 1475 1475
Wheelbase2360 2360
Track Front1295 1295
Rear1290 1290
Ground clearance 160 160
ITEM: Mass (weight)UNIT: kg
ALTO 800 ALTO K10
Curb mass (weight) 695-727 740-755
Gross vehicle mass (weight) rating 1185 1210
Permissible maximum Axle WeightFront 630 630
Rear 630 630
