2013 SUBARU FORESTER tire size

[x] Cancel search: tire size

Page 47 of 436

SUBARU FORESTER 2013 SH / 3.G Owners Manual 1-22Seat, seatbelt and SRS airbags
SUBARU dealer as soon as possible 
even if the seatbelt pretensioner did
not operate in that accident. &Precautions against vehicle modification
Always consult your

Page 84 of 436

SUBARU FORESTER 2013 SH / 3.G Owners Manual &Precautions against vehicle modification
WARNING
To avoid accidental activation of the 
system or rendering the system
inoperative, which may result in
serious injury, no modifications
should be made

Page 129 of 436

SUBARU FORESTER 2013 SH / 3.G Owners Manual 3-18Instruments and controls
&Low tire pressure 
warning light (U.S.-spec. models)
When the ignition switch is turned to the “ON ”position, the low tire pressure warn-
ing light will illuminate fo

Page 130 of 436

SUBARU FORESTER 2013 SH / 3.G Owners Manual pressure, a tire may have signifi- 
cant damage and a fast leak that
causes the tire to lose air rapidly.
If you have a flat tire, replace it
with a spare tire as soon aspossible.
. When a spare tire

Page 276 of 436

SUBARU FORESTER 2013 SH / 3.G Owners Manual 5. If the brake fluid level is not below the “MIN ”mark, the EBD system may be
malfunctioning. Drive carefully to the
nearest SUBARU dealer and have the
system inspected. 
6. If the brake fluid le

Page 292 of 436

SUBARU FORESTER 2013 SH / 3.G Owners Manual Driving tips for AWD models
WARNING
. Always maintain a safe driving
speed according to the road and 
weather conditions in order to
avoid having an accident on a
sharp turn, during sudden brak-
ing o

Page 298 of 436

SUBARU FORESTER 2013 SH / 3.G Owners Manual vehicle speed.
NOTE 
When the season requiring non-freez- 
ing type wiper blades is over, replace
them with standard wiper blades. & Corrosion protection
Refer to “Corrosion protection ”F 10-4.
&

Page 305 of 436

SUBARU FORESTER 2013 SH / 3.G Owners Manual 8-18Driving tips
watercraft. &When you do not tow a trailer
. Remove the ball mount from the hitch
receiver tube and insert the receiver cover 
onto the hitch receiver tube. . Place the dust cap over
Page:   1-8 9-16 17-24 next >