2013 SSANGYONG TURISMO ICM

09-78790-01
Installation of PAS sensor
- Rear obstacle detection sensor : 3 off
- Activated for reverse driving only
PAS sensor
PAS unit
Control PAS sensor and send its
status to ICM box (buzzer)
LH/RH sensor CTR sensor LH sensor CTR sensor RH sensor

09-8
3. Operation process
1) How to operate
The PAS sensors are activated when the transmission gear is in the "R" (reverse) position. -
2) Sensing distance and range
3) Alarm section and interval (from PAS buzzer in ICM box)
0 ~ 30 cm (third sound produced within area to be ignored)
*
LH sensor Central sensorRH sensor

09-114891-01
(2) Interior Components
ESP Indicator
Sensor Cluster
ESP OFF Switch
Steering Wheel Angle
SensorWarning buzzer
(ESP, PAS buzzer)
Located in ICM box
ESP warning and indicator lamp
ESP OFF indicator lamp
ABS warning lamp
Parking brake operating indicator (EBD warning lamp:
both parking brake operating indicator and ABS warning
lamp come on at the same time) 1.
2.
3.
4.
ESP buzzer

03-297410-01
Driver & Front
Passenger
Seat Warmer Switches
3) To Activate Driver & Front Passenger Seat Warmer
Operating condition ▶
Turn the ignition key to the "ON" position and start the engine.
If the cranking signal is inputted, the seat warmer stops working during cranking.
Operation description ▶
When pressing the seat warmer switch for the driver and/or front passenger seat with IGN ON, the
seat warmer operates. Press the switch again to stop the seat warmer.
Operation procedures ▶
When pressing the seat warmer switch for the driver and/or front passenger seat, the seat warmer
relay in the ICM box is activated to supply power to the seat warmer.
ICM Box Driver & Front
Passenger
Seat Warmer Activated
The driver and front passenger seat warmers have separate circuits, allowing them to function
independently.