Page 436 of 1336
1116-01
1. SPECIFICATION
Unit Description Specification
Cylinder headHeight 142.5 mm
Weight 15.6 kg
Flatness Below 0.05 mm
Spark plug offset 2.5 mm
Thickness of cylinder head gasket (when compressed)
0.7 mm
CamshaftAxial end playIntake 0.1~0.35 mm
Exhaust 0.1~0.35mm
Valve timingIntake valve open BTDC 35/-10
Intake valve close ABDC 14/62
Exhaust valve open BBDC 40/40
Exhaust valve close ATDC 12/12
Journal bearingDiameter 24mm
Width 17 mm
Oil clearance 0.037~0.074 mm
Intake/exhaust
valveLift of intake valve Max. 9.0 mm
Lift of exhaust valve Max. 8.0 mm
Length of intake valve 115.0mm
Length of exhaust valve 114.0mm
Connecting rod End play 0.5~1.5mm
Page 755 of 1336
8712-03
Smart key module
1. SPECIFICATIONS
Component Item Specifications
SKM unit
(Electric)Rated voltage 12.0 V
Operating voltage9.0 V to 16.0 V
(CAN: 6.0 V to 18.0 V)
Operation temperature
Max. operating humidity 95%
Dark current 5.5 mA
Voltage drop 1.0 V or less
SKM unit
(wireless)Receive frequency
Frequency bandwidth
Modulation typeFSK
(Frequency Shift Keying)
Receive distanceRF: 10 m or more (without obstacles)
LF: 1.2 m (without obstacles)
Smart key
Component Item Specifications
Smart key
(Electric)Operating voltage 2.7 V to 3.3 V
Operation temperature
Battery type CR2032
Smart key
(wireless)RF (Radio
Frequency)
(transmission)LF (Low Frequency)
(receiving)
Sending/receiving
frequency
Modulation typeFSK
(Frequency Shift Keying)
Page 1159 of 1336
4170-00
2) Tire Unit Indication
Aspect ratio (%)
= Nominal section height (H) / Nominal section
width (W)
X 100
3) Tire Inflation Pressure (32 psi)
Proper inflation pressure Excessive inflation pressure Low inflation pressure
The contact area between the
ground and tire faces the tread
layer completely. Thus the driving
force and the braking force are
optimized, and the tire is worn out
evenly resulting in increased life.The contact area between the
ground and tire is not enough,
so the tire is worn out unevenly
and the tire is vulnerability to
outside influence.The contact area between the
ground and tire is excessive, so
a lot of heat is generated and
the tire is worn out unevenly and
abnormally.
Tread widthTread widthTread width