MessageMeaningInternal Bluetooth module not work-
ing.A Bluetooth ®
error a)
.Please switch on the ignition to use
telephone functions.The phone function is not available be-
cause the ignition is off. Switch on the
ignition.Telephone is currently not available
\nbecause an update is active.The phone function is not available be-
cause Bluetooth ®
is being updated.Battery of the device … is almost run
down.Warning prior to switching off the mo-
bile phone due to a dead battery.a)
By removing the ignition key, the Bluetooth ®
function is reset to the initial settings after approxi-
mately 2 minutes. The function should be restored after carrying out this step.
Phonebox
Fig. 11
Phonebox
First read and observe the introductory information and safety warn- ings
on page 24.
At the bottom of the storage compartment in the front center console is an in-
duction plate connected to a GSM roof antenna roof - the Phonebox.
Function
When the mobile phone is inserted into the Phonebox, the phone signal increases in strength by about 20%. This reduces the level of phone battery discharge and
the electromagnetic radiation inside the vehicle.
Inserting the mobile phone into the Phonebox›Press on the edge of the lid A in the direction of the arrow, and open the stor-
age compartment.›
Place the mobile phone in the storage compartment
B
with its back on the in-
duction panel.
›
Press on the edge of the lid
A
in the opposite direction from the arrow, and
close the storage compartment » .
The Phonebox cannot be used as an alternative to connecting the mobile phone
with the device.
WARNINGFor safety reasons, the storage compartment must always be closed when
driving.
Note
■ Protective cases or cases around the mobile phone placed in the storage com-
partment may interfere with the phone signal strength.■
Metallic objects such as coins or keys under the mobile phone can affect the
phone signal strength.
Connecting the mobile telephone to the hands-free
system
Introduction
This chapter contains information on the following subjects:
Pairing process from the hands-free system
27
Pairing from the mobile phone
28
Fast connection to another paired mobile phone
28
Automatic connection
29
Disconnection
29
First and foremost, pay attention to the safety instructions » page 4 , Important
notes .
To connect a mobile phone with the hands-free system, the two devices must be paired.
26Communication
