2013 Seat Leon SC manual radio set

47
Navigation
No navigation functions are available during the copying process. The copy-
ing process lasts approximately 2 hours.
Do not remove the memory card while the navigation data is being copied.
This could damage the memory card!
If the unit is switched off during the copying process, the process stops and
will start automatically when the unit is switched back on.
Starting the copying process manually
If the copying process does not start automatically after the memory card
containing valid navigation data has been inserted, the updating process
can be started manually.
● Press the NAV
unit button.
● Press the SETUP unit button.
● Activate Navigation data base by turning and pressing the setting knob
⇒ Fig. 1 10 ⇒ 
Fig. 43.
● Press the Display navigation database info function button to view the area of
navigation and the version of the navigation data stored.
● Press the Install Nav data from SD
function button to start copying the infor-
mation.
CAUTION
Do not remove the memory card while the navigation data is being copied.
This could damage the memory card! 
Navigation from the SD card
If certain navigation data is to be used only temporarily, for example a
change of geographical zone, we recommend you use the option to navi-
gate with the SD card, rather than using the internal data stored in the navi-
gator. To switch on navigation from the SD card, insert the card in the radio and
navigation unit. Please note that any active route guidance will be cancelled
when the SD card is inserted. If the memory card inserted contains valid
navigation data, a new window will open and will ask whether you wish to
download the data from the SD card to the system, or whether you prefer to
use the SD card directly.
Press the function button
Use SD
to start the process. Next, the navigation
data stored on the SD card is verified. During this process, do NOT remove
the SD card. This could damage the card.
When the verification procedure has ended, the SD card symbol  is dis-
played in the upper left-hand corner of the navigator screen. It is now possi-
ble to use the data from the SD card to calculate navigation routes.
To stop using the data from the SD card, the card must be removed correctly
from the radio and navigation unit. Do not remove the card immediately,
this could result in damage. To remove the SD card correctly, proceed as fol-
lows:
Press the SETUP
key on the radio and navigation system.
Press the function button Navigation database
Press the function button Remove SD card.
Wait until the system indicates that the SD card can be removed and
then remove it. 
–
–
–
–

48Navigation
Navigation main menu
Fig. 44 Navigation main
menu with destination
entry options.
Fig. 45 Vehicle position
in the map view.
The navigation functions are only enabled when navigation data for the cur-
rent area are available in the radio and navigation system.
The Navigation main menu allows you to select a new destination, call up a
previously used or stored destination and search for points of interest. Opening the Navigation main menu
●
Press the NAV
unit button to open the last menu opened in the naviga-
tion function.
● If the Navigation main menu is not displayed, press the NAV
unit button
again. This will open the main menu from any navigation submenu.
● Press the 
unit button to switch back through the sequence of menus
to the Navigation main menu and cancel entry of destination data step by
step ⇒  page 51.
Switching between the map view and the Navigation main menu
● In the Navigation main menu, press the NAV
unit button to switch to the
map view ⇒ Fig. 45.
● Press the NAV
unit button again to switch back to the
Navigation main
menu ⇒ Fig. 44.
Selecting destination entry in the Navigation main menu
● Open the Navigation main menu ⇒ Fig. 44.
● Turn the setting knob ⇒ Fig. 1 10
to select a symbol for destination en-
try. The type of destination entry currently marked is displayed in the centre
of the screen (in Fig. 44: Address).
● Press the setting knob to select the displayed destination entry method.
● Alternatively: Press a destination entry symbol on the screen.
When a function button has been pressed, the corresponding window will
open to allow you to enter the destination ⇒ page 51.
Destination entry methods
Function button: Effect Address: Open input windows for selection of a destination address. Dest. memory: Open a list of manually stored destinations. Last destinations : Open a list of automatically stored last destinations. Petrol station: Open a list of the nearest petrol stations.P Car park: Open a list of the nearest car parks. 

71
Navigation
The unit only processes and displays TMC traffic reports affecting the area
within a radius of roughly 100 km from the current vehicle position.
TMC traffic reports are required for dynamic route guidance and are dis-
played on the map ⇒ page 69.
Display TMC traffic reports
● Press the TRAFFIC
unit button to display the list of the current TMC traffic
reports ⇒ Fig. 73.
● Press one of the TMC traffic reports on the screen to open the detailed
view ⇒ Fig. 74.
● Alternatively: select the TMC report by turning setting button ⇒ Fig. 1 10
and press to open a detailed view
⇒ Fig. 74.
● In the detailed view, you can browse through the TMC traffic reports us-
ing the function buttons Previous
and Next.
Display TMC traffic news stations
● Open the list of the current TMC traffic reports.
● Press the 
⇒ Fig. 1
7 unit button to open the information window. The
current TMC traffic news station is displayed.
● Press the 
unit button again to close the information window.
Note
By using the Congestion ahead ⇒ Fig. 73 function button it is possible to enter
a manual exclusion from the vehicle position ⇒ page 69.
Note
The radio-navigation system can only process and store TMC traffic reports
if the unit has access to navigation data for the area you are currently travel-
ling through.
Note
The quality of the dynamic route guidance depends on the information con-
tained in the TMC traffic reports. The radio stations are responsible for the
content of the news broadcast. 
Route guidance in demo mode
If demo mode is activated in the Navigation setup menu ⇒ page 72, an ad-
ditional pop-up window opens when you start route guidance.
● Pressing the Demo
function button starts a “virtual route guidance” to
the destination you have entered.
● If you press the Normal
function button, a “real route guidance” starts.
The sequence of events and the operations in virtual route guidance are
similar to those in real route guidance.
Virtual route guidance is repeated when you reach the fictitious destination
and always starts again from the starting point if it is interrupted.
If the starting point for demo mode has been defined manually in the Navi-
gation setup menu, virtual route guidance will start from this position.
If the vehicle is moved and the unit can determine its current location by
GPS, any manually entered starting point will be overwritten with the current
vehicle location ⇒ page 72.
When real route guidance is started following virtual route guidance in
demo mode, the unit first has to reorient itself. This may take some time,
depending on the number of satellites the unit can currently receive. Mov-
ing the vehicle may speed up the reorientation process. 

81
Telephone control (Phone)
To display the above, the mobile phone should accept the hands-free pro-
file 1.5.
Function buttons in the PHONE main menu
ADial number.
BPhone book
CMissed calls
DDialled numbers
EReceived calls
FVoice mailbox number a)
Accepting or making a call

or
Activating telephone voice control
a) The number of the voice mailbox should be entered manually in the telephone setup menu
⇒ page 81. 
Setup menu Telephone (SETUP)
The functions activated with the Bluetooth settings button are required for the
connection of a mobile phone or an external Bluetooth device ⇒ page 77.
Function button: EffectEnter voice mailbox: enter the voice mailbox number.Load address book: the telephone book entries in the radio and navigation
system will be updated from the mobile phone and SIM card. The proce-
dure may last several minutes.
Factory settings: Restore factory settings in telephone menu and delete user
profiles and numbers stored.

SD card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Searching for a point of interest . . . . . . . . . . . . 55
Setting knob (operation) . . . . . . . . . . . . . . . . . . 11
Settings SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Settings (SETUP)Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Factory settings . . . . . . . . . . . . . . . . . . . . . 100
Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Volume distribution . . . . . . . . . . . . . . . . . . . 99
SETUP DAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
See: "Settings (SETUP)" . . . . . . . . . . . . . . . . 99
TRAFFIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Soft keys See: Function buttons . . . . . . . . . . . . . . . . . 10
Sound distribution (balance/fader) . . . . . . . . . 99
Sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Sound (treble/mid-range/bass) . . . . . . . . . . . . 99
Special features Anti-theft coding . . . . . . . . . . . . . . . . . . . . . . 8
AUX mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Display information . . . . . . . . . . . . . . . . . . . . 9
Speed-dependent volume adjustment (GALA) . 99
Station buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Station search . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Switch-off delay (timeout) . . . . . . . . . . . . . . . . . . 8
Switch-on volume . . . . . . . . . . . . . . . . . . . . . . . . 99 Switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Symbols used in this manual . . . . . . . . . . . . . . 10
System of units
Metric or imperial . . . . . . . . . . . . . . . . . . . . 101
T Telephone menu . . . . . . . . . . . . . . . . . . . . . . . . . 84 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Telephone users Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Things to note Radio coding . . . . . . . . . . . . . . . . . . . . . . . . . . 8
volume reduction . . . . . . . . . . . . . . . . . . . . . . 8
Timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
TMC Dynamic route guidance . . . . . . . . . . . . . . . 69
TMC traffic reports . . . . . . . . . . . . . . . . . . . . 70
Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
TP (Traffic Programme) . . . . . . . . . . . . . . . . . 19, 20 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Traffic announcement (INFO) . . . . . . . . . . . . 21
Track repeat function . . . . . . . . . . . . . . . . . . . . . 38
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
TRAFFIC TMC traffic reports . . . . . . . . . . . . . . . . . . . . 70
Traffic announcement (INFO) . . . . . . . . . . . . . . . 21
Traffic congestion (TMC) . . . . . . . . . . . . . . . . . . 69
Traffic news See "TP (Traffic Programme)" . . . . . . . . . . . 19
See: "TP (Traffic Programme)" . . . . . . . . . . . 20 Treble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
U Unit buttons (hard keys) . . . . . . . . . . . . . . . . . . 10 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Unit overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
User entries, deleting See: Deleting . . . . . . . . . . . . . . . . . . . . . . . 100
V
VBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Voice control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Basic functions . . . . . . . . . . . . . . . . . . . . . . . 95
Commands . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Correct use . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Dialogue . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Voice control commands . . . . . . . . . . . . . . . . . . 96
Voice mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Volume Navigation announcements . . . . . . . . . . . . 99
Parking distance warning system volumereduction . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Playback volume (AUX and MDI) . . . . . . . . . 39
See: Adjusting the base volume . . . . . . . . . . 9
Speed-dependent vol- ume adjustment (GALA) . . . . . . . . . . . . . . 99
Switch-on volume . . . . . . . . . . . . . . . . . . . . . 99
Traffic announcements . . . . . . . . . . . . . . . . 99
Volume distribution (balance/fader) . . . . . . . . 99
108 Index