2013 Seat Leon SC ECO mode

34Audio mode
Playing audio from an RSE system using an additional external audio
source
● Lower the base volume on the radio-navigation system ⇒ page 8.
● Connect the external player to the AUX-RSE connector in the vehicle and
start playback on the external player in accordance with the instructions giv-
en in the RSE handbook.
● In Media mode, press the SETUP
unit button to open the
Media setup
menu. Tick the checkbox Activate AUX2 input so that the AUX2 source is
shown in the Media selection menu 1)
⇒  Fig. 29.
● In the MEDIA main menu, press the MEDIA
unit button to open the
Media
selection menu.
● Press the AUX2 ⇒ Fig. 30 function button to start playback of the exter-
nal audio source connected to the RSE over the vehicle speakers.
The output volume of the connected external audio source should be adjus-
ted to the volume of the other audio sources ⇒ page 39 ( AUX2 volume in
the Media settings menu ⇒ Fig. 29).
Things to note about the AUX2 additional external audio source
● If another audio source (CD, SD, etc.) is selected during playback, the
external player connected to the RSE continues playing.
● When playback on the external audio source has finished or if the exter-
nal player is disconnected from the AUX-RSE connector, the radio and navi-
gation system remains in the AUX2 menu.
● The AUX2 symbol remains visible and on (highlighted in red), and there-
fore accessible, as long as the “ Activate AUX2 input ” check box in the
(Media setup menu ) is ticked. The option should be deactivated when play-
back has finished. Recommendations for use
●
If your vehicle is not fitted with an RSE system or a MEDIA-IN or MDI mul-
timedia interface, we recommend that the Activate AUX2 input is always left
unticked. Otherwise, the AUX2 source (if your vehicle does not have MDI) or
the “MDI” source may be shown in the Media selection menu as “active”
(accessible), even if there is no audio source connected to them.
● If your vehicle is fitted with a MEDIA-IN or MDI multimedia interface, the
AUX2 additional external source is not available. Use the check box Activate
AUX2 input as described in the section MEDIA-IN or MDI multimedia inter-
face. 
1)
This option can also be activated using the function button in the pop-up window which
appears when you try to go to the MEDIA main menu when there is no Media source con-
nected or activated.

39
Audio mode
The scan function can also be started and stopped by briefly pressing the
setting knob ⇒ Fig. 1 10
.
Available playback modes
Function button: EffectScan: Each track of the current folder or current Media source will be
played for 10 seconds. The scan function starts at the next track.
Mix: The tracks of the current audio CD will be played in random order.Mix folder: The tracks of the current folder will be played in random order.Mix all: The tracks of the current data medium will be played in random or-
der.
Repeat track: Repeats the currently playing title.Repeat CD: At the end of the current audio CD, its tracks will be played
again.
Repeat folder: At the end of the current folder, its tracks will be played
again.
The random play and repeat functions remain active for the corresponding
Media source until they are closed for that source.
Media setup menu (SETUP)
In Media mode, press the SETUP unit button to open the
Media setup menu.
The selection options depend on the type of unit and equipment.
Function button: EffectTraffic programme (TP): To activate or deactivate the TP function ⇒ page 19. Scan/Mix/Repeat incl. : Subfolders are included in the selected playback
mode ⇒  page 38.
This setting must be defined before the playback mode is activated.
AUX input level: Adjust the input volume for an external audio source in the
AUX-IN multimedia socket ⇒ Fig. 1 9 to the output volume
of the other
audio sources ⇒ page 32.
Function button: EffectBluetooth settings: Press to enter the BT settings menu to view the list of de-
vices connected, search for devices, etc.
BT-Audio volume: Adjust the input volume for a Bluetooth audio source to
the playback volume of the other audio sources.
 Activating the AUX2 input: Press to activate the AUX2 audio input. If your ve-
hicle does not have an RSE system, or a MEDIA-IN or MDI multimedia inter-
face, this checkbox should always be left unmarked ⇒ page 33.
 MDI volume: Adjust the input volume for an iPod®
or iPhone ®
or other de-
vice connected to the MEDIA-IN multimedia interface to the playback vol-
ume of the other audio sources ⇒ page 40.
 AUX2 volume: Adjust the input volume for the AUX2 ⇒  table on page 39
external audio source to the playback volume of the other audio sources
⇒ page 32.
Adjusting playback volume
If you need to increase the output volume of an external audio source, first
lower the base volume on the radio-navigation system ⇒ page 9.
If the sound from the external audio source is too quiet, increase the output
volume on the external audio source if possible. If it is too low, increase the
input volume .
If the sound from the connected external audio source is too loud or distor-
ted, lower the output volume on the external audio source if possible. If it is
still too loud, lower the input volume.
WARNING
If the volume is too high, you could damage your hearing. Even if the vol-
ume is too loud for a short period only.
CAUTION
The vehicle loudspeakers may be damaged if the volume is too high or the
sound is distorted. 

74Telephone control (Phone)
Telephone control (Phone)
Introduction
Introduction
The telephone functions described below may be controlled using the radio
and navigation system, and by voice control, provided that there is a mobile
phone switched on and with the BT function on. In addition, the mobile
must be connected and paired via Bluetooth to the radio and navigation
system.
For the connection between the mobile phone and the radio and navigation
system, the mobile phone must have Bluetooth®
and it must be activated.
If no mobile phone is connected to the radio and navigation system, tele-
phone control from the navigator and voice control will not be available.
● Pair and connect the mobile phone to the radio and navigation system
⇒ page 77.
When the mobile phone has been paired with the navigation system, the
phone can be controlled via the navigation system and the multifunction
controls on the steering wheel using the vehicle instrument panel. Func-
tions available include making calls in hands-free mode, access to the mo-
bile phone book, access to the list of calls received, missed and recently di-
alled, and control of these functions using the voice recognition system.
The hands-free device means that the telephone can be used inside the ve-
hicle; the driver will not have to remove their hands from the steering wheel
nor will be distracted from traffic.
Please observe instructions concerning the use of mobile phones in vehi-
cles without an external aerial ⇒ page 76.
WARNING
Telephone calls and the use of the mobile phone pre-installation while
driving may distract the driver from the road and result in accident.
● Always stay alert and drive responsibly.
● Select volume settings that allow you to easily hear signals from out-
side the vehicle at all times, e.g. emergency service sirens.
● Your call may be cut off or you may be unable to make calls if you are
in an area with no mobile phone network coverage, an area where the
network is very weak or, in some cases, in a tunnel, garage or underpass.
This also means that no emergency calls can be made.
WARNING
If the mobile phone is not securely fastened in position, it could be sent
flying around the vehicle in the event of sharp braking, sudden manoeu-
vres or accident, causing injury.
● While the vehicle is in motion, always secure the mobile phone prop-
erly outside the airbag deployment zone.
WARNING
Mobile phones may affect the operation of pacemakers. Always maintain
a suitable distance between the phone and the pacemaker.
● Maintain a gap of roughly 20 centimetres between the aerials of the
mobile phone and the pacemaker, as mobile phones may affect the func-
tioning of pacemakers. 

76Telephone control (Phone)
New models of mobile phone are continually being launched on the market.
These are developed by different manufacturers, use different operating
systems and operate in different ways. Therefore, some mobile phones are
unable to correctly perform the functions described, or are totally incompati-
ble with the radio and navigation system.
Depending on the model of phone, some functions may not be available or
may require the phone configuration to be changed. Familiarise yourself
with your mobile phone and with the radio and navigation unit. Please read
the mobile phone manual carefully to determine the available options.
To help you when choosing a mobile phone, SEAT offers the results of the
compatibility tests on different mobile phones. Visit the SEAT web page or
ask your dealership for further information.
Even when a mobile phone is shown as compatible in the SEAT lists, it may
not work correctly when paired with the radio and navigation system, due to
the SW version of the mobile phone. In this case, we recommend you up-
date the telephone software. Mobile phone manufacturers usually make up-
dates available on Internet for their customers in order to improve the work-
ing of the phone. 
Using a mobile phone in the vehicle
Mobile telephones transmit and receive radio waves, both when in use and
when on stand-by. Scientific studies state that radio waves exceeding cer-
tain values may be harmful to the human body. International committees
and authorities have established limits and directives in order to ensure
electromagnetic radiation from mobile phones remains within certain limits
that do not endanger human health. Nevertheless, there is no conclusive
scientific evidence that wireless telephones are totally safe.
Therefore, some experts recommend that use of mobile phone be kept to a
minimum until the results of current research are published. If a mobile phone is used inside the vehicle without first connecting it to the
vehicle telephone exterior aerial, electromagnetic radiation may be greater
than if the mobile phone had been connected to a built-in or exterior aerial.
If the vehicle has a suitable hands-free device, it complies with legislation
in many countries where the use of mobile phones within the vehicle is only
permitted using a hands-free device.
The factory-mounted hands-free system has been designed for use with
conventional mobile phones and mobile phones with Bluetooth technology.
Mobile phones must be mounted on a suitable support. This support must
be securely inserted into the base plate. This ensures that the mobile phone
is securely attached to the dash panel, it is always within reach of the driver
and is connected to the vehicle exterior aerial.
Connecting the mobile phone to a built-in or exterior aerial, helps to reduce
the levels of electromagnetic radiation affecting the human body. The quali-
ty of the connection is also improved.
If the mobile phone is used inside the vehicle without the hands-free sys-
tem, the phone will not be securely attached to the instrument panel, nor
will it be connected to the vehicle exterior aerial. In addition, the mobile
phone will not charge through the support. On-going calls may also be in-
terrupted and the quality of the connection affected.
Only use your mobile phone inside the vehicle if it is connected to a hands-
free system with an exterior aerial.
WARNING
A loose or incorrectly attached phone could be thrown around the vehicle
interior in the event of sudden braking, sharp movements or accident and
cause injury to passengers.
● While the vehicle is in motion, always secure the mobile phone prop-
erly outside the airbag deployment zone. 

101
Settings (SETUP)
Function button: EffectView of keyboard ABC: The keyboard in input windows has an alphabetic layout. QWERTY: The keyboard in input windows has the usual computer layout.Screen: Change display settings. Brightness: press to select the screen brightness setting. Day/Night: changes the map view.
Automatic: the map view changes when the dipped beams are switch-
ed on.
Day: the map view remains in daytime mode (bright). Night: the map view remains in night-time mode (dark).
Acoustic feedback signal: Switch the confirmation tone for pressing a func-
tion button on or off.
Factory settings: restore the unit to its original factory settings.Air conditioning announcements
3 s, 5 s, 10 s Changes to the air conditioning are displayed on the
screen for approximately 3, 5 or 10 seconds.
Off: Changes to the air conditioning settings are not displayed on the
screen.
Clock Display: Switch time display on or off ⇒ page 9.Status of the SD card: Display whether the memory card contains navigation
data.
Remove the SD card: In some units the memory card inserted in the unit must
be prepared before extracting it.
Note
The system of units used in the navigation menu (metric or imperial) is set
on the instrument panel. 

Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Mobile phoneCompatibility . . . . . . . . . . . . . . . . . . . . . . . . 75
Exterior aerial . . . . . . . . . . . . . . . . . . . . . . . . 76
Multi-function steering wheel . . . . . . . . . . . 82, 83
Multifunction steering wheel . . . . . . . . . . . . . . . . 8
MUTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
N
Navigation announcements . . . . . . . . . . . . . . . 63 Adjusting the volume . . . . . . . . . . . . . . . . . . 99
Navigation data . . . . . . . . . . . . . . . . . . . . . . . . . 45 Copy to navigation data base . . . . . . . . . . . 46
Navigation from the SD card . . . . . . . . . . . . . . . 47
Navigation recommendations . . . . . . . . . . . . . . 64
NAV (navigation) . . . . . . . . . . . . . . . . . . . . . . . . 45 Address entry . . . . . . . . . . . . . . . . . . . . . . . . 51
Age of navigation data . . . . . . . . . . . . . . . . . 46
Avoiding traffic with TMC . . . . . . . . . . . . . . . 69
Car park search . . . . . . . . . . . . . . . . . . . . . . . 54
Changing the address . . . . . . . . . . . . . . . . . 52
Changing the destination . . . . . . . . . . . . . . 52
Congestion ahead . . . . . . . . . . . . . . . . . . . . 70
Copy navigation data . . . . . . . . . . . . . . . . . . 46
Defining route criteria . . . . . . . . . . . . . . . . . 62
Defining route options . . . . . . . . . . . . . . . . . 62
Deleting destinations . . . . . . . . . . . . . . . . . . 58
Deleting the navigation history . . . . . . . . . . 72
Demo mode . . . . . . . . . . . . . . . . . . . . . . . . . 71
Destination address . . . . . . . . . . . . . . . . . . . 51
Destination address window . . . . . . . . . . . . 52 Destination entry overview . . . . . . . . . . . . . 48
Destination from destination memory . . . . 53
Destination memory . . . . . . . . . . . . . . . . . . . 57
Destination window . . . . . . . . . . . . . . . . . . . 52
Displaying the map . . . . . . . . . . . . . . . . . . . 48
Dynamic route guidance . . . . . . . . . . . . . . . 69
Economical route . . . . . . . . . . . . . . . . . . . . . 62
Editing destinations . . . . . . . . . . . . . . . . . . . 58
Editing last destinations . . . . . . . . . . . . . . . 57
Editing the home address . . . . . . . . . . . . . . 60
Enter destination . . . . . . . . . . . . . . . . . . . . . 51
Entering a detour . . . . . . . . . . . . . . . . . . . . . 66
Entering an exclusion . . . . . . . . . . . . . . . . . . 70
Excluding types of route . . . . . . . . . . . . . . . 63
Fast route . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Flagged destination . . . . . . . . . . . . . . . . . . . 59
Home address . . . . . . . . . . . . . . . . . . . . . . . 53
Incompletely digitised areas . . . . . . . . . . . . 45
Information window . . . . . . . . . . . . . . . . . . . 59
Input window . . . . . . . . . . . . . . . . . . . . . . . . 49
Last destinations . . . . . . . . . . . . . . . . . . . . . 53
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Navigation area . . . . . . . . . . . . . . . . . . . . . . 46
Navigation data . . . . . . . . . . . . . . . . . . . . . . 45
On-screen keyboard . . . . . . . . . . . . . . . . . . . 49
Petrol station search . . . . . . . . . . . . . . . . . . 54
Point of interest . . . . . . . . . . . . . . . . . . . . . . 55
Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Postcode entry . . . . . . . . . . . . . . . . . . . . . . . 51
Removing an exclusion . . . . . . . . . . . . . . . . 70
Route guidance . . . . . . . . . . . . . . . . . . . . . . 62
Select destination . . . . . . . . . . . . . . . . . . . . 51
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Short route . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Storing destinations . . . . . . . . . . . . . . . . . . 58
TMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
TRAFFIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Traffic incidents . . . . . . . . . . . . . . . . . . . . . . 69
Traffic reports (TMC) . . . . . . . . . . . . . . . . . . . 70
NAV (Navigation) Excluding sections . . . . . . . . . . . . . . . . . . . . 68
Navigation announcements . . . . . . . . . . . . 63
Navigation recommendations . . . . . . . . . . . 64
Re-opening sections . . . . . . . . . . . . . . . . . . 68
Route guidance map . . . . . . . . . . . . . . . . . . 64
Route list . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
O
On-screen keyboard . . . . . . . . . . . . . . . . . . . . . . 49
Operating instructions Adjusting volume . . . . . . . . . . . . . . . . . . . . . . 9
Operation Browsing lists . . . . . . . . . . . . . . . . . . . . . . . . 11
Checkboxes . . . . . . . . . . . . . . . . . . . . . . . . . 10
Factory settings . . . . . . . . . . . . . . . . . . . . . 100
Function buttons . . . . . . . . . . . . . . . . . . . . . 10
Input window . . . . . . . . . . . . . . . . . . . . . . . . 49
Selecting menu items . . . . . . . . . . . . . . . . . 11
Setting knob . . . . . . . . . . . . . . . . . . . . . . . . . 11
Switching on and off . . . . . . . . . . . . . . . . . . . 8
Text input . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . 10
Unit buttons . . . . . . . . . . . . . . . . . . . . . . . . . 10
Via voice control . . . . . . . . . . . . . . . . . . . . . . 94
Original settings . . . . . . . . . . . . . . . . . . . . . . . . 100
106 Index