78Cockpit
Steering column controls*
General information
The column incorporates multifunctional modules from which to control au-
dio and telephone functions on the vehicle.
There are two versions of the multifunction module:
● Audio version, to control the available audio functions from the steering
wheel.
● Audio version+ Telephone version, to control the available audio func-
tions and the telephone system from the steering wheel.
Both versions can be used to control the Audio system (Radio, Audio CD,
MP3 CD, iPod 1)
/USB 1)
/PND 1)
).
The PND (portable navigation device) reproduces audio files through a mi-
cro SD card and Bluetooth audio-streaming, and tracks may be changed
through the control on the steering column.
1)
If fitted in the vehicle.
80Cockpit
Audio + Telephone Control
Fig. 42 Audio + Tele-
phone Control
Button
Short pressLong press
RadioAudio CD / MP3
CDAUX-INPND (Micro SD /
Bluetooth Audio)RadioAudio CD / MP3 CDAUX-INPND (Micro SD /
Bluetooth Audio)
AVolume upContinue volume upBVolume downContinue volume down
CVoice recognition activation Press to speak a)No functionNo function
D Station search.
Higher frequencyNext trackNo functionNext station or
song depending on sourceStation search.
Higher frequencyNext trackNo functionNext station or
song depending on source
D Station search.
Lower frequencyPrevious trackNo functionPrevious station
or song depend- ing on sourceStation search.
Lower frequencyPrevious trackNo functionPrevious station
or song depend- ing on source
EAccept call/hang up⇒ table on
page 81Reject call⇒ table on page 81
FCyclical source changeCyclical source changea) Function only available if the vehicle has a telephone unit (other than PND)
81
Cockpit
Functions for button E
1)
If there is an incoming
callPress once
: accept call
During a call.Press once: it ends the call
Without an incoming
call
Press once: the PND goes into telephone mode (if
not already in this mode).
Press twice : opens the call history of the tele-
phone connected to the PND.
Press three times : the first number in the call his-
tory is called.
If no telephone is con-
nectedPress once : The PND will display the following
message: “No telephone is connected, please con-
nect a telephone ”.
1)
If a telephone is already connected via Bluetooth to the PND
Safety FirstOperating instructionsPractical TipsTechnical Specifications
