2013 Seat Exeo ST engine

[x] Cancel search: engine

Page 284 of 327

Seat Exeo ST 2013  Owners manual 282If and when
● Main headlight lamps:  Xenon ⇒ 
 lights.
● Sources of the  DRL (daylight) light unit and  position.
WARNING
● Take particular care when working on components in the engine c

Page 297 of 327

Seat Exeo ST 2013  Owners manual 295
If and when
– Unscrew the screws to remove the bulb  ⇒ Fig. 241.
– Remove the bulb, moving it in the direction of the arrow and
outwards  ⇒ Fig. 242.
– Installation involves all of t

Page 298 of 327

Seat Exeo ST 2013  Owners manual 296If and when
Jump leads
Jump leads must comply with standard  DIN 72553 (see cable manufactur-
er's instructions). The wire cross section must be at least 25  mm 2
 for petrol
engines and at lea

Page 299 of 327

Seat Exeo ST 2013  Owners manual 297
If and when
– Connect one end of the  red jump lead to the positive  +
 termi-
nal of the vehicle with the flat battery  A ⇒ Fig. 246.
– Connect the other end of the  red jump lead to the

Page 301 of 327

Seat Exeo ST 2013  Owners manual 299
If and when
Towing and tow-starting
Tow-starting
The use of jump leads is preferable to tow-starting.
We recommend that you do  not tow-start your vehicle. Jump-start-
ing is preferable  ⇒ pag

Page 302 of 327

Seat Exeo ST 2013  Owners manual 300If and when
Do not pull too hard with the towing vehicle and take care to avoid jerking
the tow rope. When towing on an unpaved road, there is always a risk of
overloading and damaging the anchorag

Page 304 of 327

Seat Exeo ST 2013  Owners manual 302Description of specifications
Technical Specifications
Description of specifications
Important information
Important
The information in the vehicle documentation always takes
precedence over the in

Page 305 of 327

Seat Exeo ST 2013  Owners manual 303
Description of specifications
Vehicle identification data
The most important information is given on the identifica-
tion plate and the vehicle data sticker.
Fig. 248  Vehicle data
sticker (luggag