37B-96
MR-372-J84-37B000$648.mif
V11
ELECTRONIC PARKING BRAKE
Fault finding – Interpretation of statuses
FPA
Vdiag No.: 0C, 04, 08,
0D, 11
37B
ET022
AUTOMATIC BRAKING CONFIGURATION
NOTESSpecial notes:
To understand the operation of assisted brake application, refer to System operation.
This status indicates the assisted braking configuration status.
This configuration can be checked on two screens.
●Configuration reading screen (repair mode): LC009 Vehicle configuration (NORMAL with braking, COLD
CLIMATE without assisted braking).
●Variables screen (fault finding mode, assisted brake application sub-function).
ET022 Automatic braking configuration.
When the assisted braking is ACTIVE, the status should be WITH.
When the assisted braking is not ACTIVE (for cold countries, for example), the status should be WITHOUT.
If the configuration does not match the customer's request, reconfigure the electronic parking brake computer by
activating configuration CF007 Vehicle configuration (repair mode, see Configuration and programming).
AFTER REPAIRRepeat the conformity check from the start.
FPA_V0C_ET022 / FPA_V04_ET022 / FPA_V08_ET022 / FPA_V0D_ET022 / FPA_V11_ET022
