36B-17V1 MR-376-X76-36B000$100.mif
POWER-ASSISTED STEERING PUMP ASSEMBLY
Fault finding – Conformity check36B
GEPDA
Vdiag No.: 04
Main screen
NOTESOnly perform this conformity check after a complete check with the diagnostic tool.
The values shown in this conformity check are given as a guide.
Test conditions: Engine idling.
FunctionParameter or status
Checked or actionDisplay
and notesFault finding
Computer
supplyPR108: Computer feed
voltage10 V < PR108 < 16 V.In the event of a fault, apply
the interpretation of parameter
PR108
Oil
temperaturePR016: Oil temperatureIndicates the oil
temperature in °C. The
sensor is integrated
into the pump
assembly.
PR016 < 100°C.The parameter value may
reach 130°C during parking
manoeuvres, but should drop
below 100°C after several
minutes.
Computer
temperaturePR008: Computer
temperatureDisplays the
temperature of the
electronics in °C.
The sensor is
integrated into the
computer of the pump
assembly.
PR008 < 60°C.Exceptionally, the parameter
value may reach 75°C when
the engine is put under great
strain and in a hot ambient
environment.
