2013 RENAULT KANGOO coolant

17B-190V2 MR-376-X76-17B050$130.mif
PETROL INJECTION
Fault finding – Interpretation of parameters17B
V42 Injection
Program No.: 2A
Vdiag No.: 04, 05, 06,
14, 16, 18
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the computer memory.
Carry out a road test, then check with the diagnostic tool.
PR089VEHICLE SPEED
PA R A M E T E R
DEFINITIONGives the vehicle speed in km/h.
Conformity check: Engine stopped and ignition on, or engine running, and engine coolant temperature > 80°C.
Carry out a road test, observing the vehicle speed on the instrument panel and the information given by the
diagnostic tool.
If there is an inconsistency between the two values, run complete fault finding on the ABS computer (see 38C,
ABS).
V42_V04_PR089/V42_V05_PR089/V42_V06_PR089/V42_V14_PR089/V42_V16_PR089/V42_V18_PR089

17B-191V2 MR-376-X76-17B050$130.mif
PETROL INJECTION
Fault finding – Interpretation of parameters17B
V42 Injection
Program No.: 2A
Vdiag No.: 04, 05, 06,
14, 16, 18
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the computer memory.
Carry out a road test, then check with the diagnostic tool.
PR097MOTORISED THROTTLE VALVE LOWER STOP PROGRAMMED VALUE
PA R A M E T E R
DEFINITIONThis parameter indicates the programmed throttle valve upper stop value as a %.
Conformity check with engine stopped and ignition on, or engine running, and engine coolant temperature > 80°C
The value must be  9%.
In the event of a fault, apply the interpretation of ET051 Throttle stop programming.
V42_V04_PR097/V42_V05_PR097/V42_V06_PR097/V42_V14_PR097/V42_V16_PR097/V42_V18_PR097

17B-192V2 MR-376-X76-17B050$130.mif
PETROL INJECTION
Fault finding – Interpretation of parameters17B
V42 Injection
Program No.: 2A
Vdiag No.: 04, 05, 06,
14, 16, 18
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the computer memory.
Carry out a road test, then check with the diagnostic tool.
PR098UPSTREAM OXYGEN SENSOR VOLTAGE
PA R A M E T E R
DEFINITIONThis parameter indicates the upstream oxygen sensor voltage in millivolts.
Conformity check with the engine running and engine coolant temperature > 80°C
The upstream oxygen sensor voltage must be between:
20 mV < PR098 < 1395 mV.
In the event of a fault, apply interpretation of DF092 Upstream oxygen sensor circuit.
V42_V04_PR098/V42_V05_PR098/V42_V06_PR098/V42_V14_PR098/V42_V16_PR098/V42_V18_PR098

17B-193
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
V2 MR-376-X76-17B050$130.mif
PETROL INJECTION
Fault finding – Interpretation of parameters17B
V42 Injection
Program No.: 2A
Vdiag No.: 04, 05, 06,
14, 16, 18
PR099DOWNSTREAM OXYGEN SENSOR VOLTAGE
PA R A M E T E R
DEFINITIONThis parameter indicates the downstream oxygen sensor voltage in millivolts
Conformity check with the engine running and engine coolant temperature > 80°C
The downstream oxygen sensor voltage must be between:
0 mV < PR099 < 1000 mV.
In the event of a fault, apply interpretation of DF093 Downstream oxygen sensor circuit.
V42_V04_PR099/V42_V05_PR099/V42_V06_PR099/V42_V14_PR099/V42_V16_PR099/V42_V18_PR099

17B-194
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
V2 MR-376-X76-17B050$130.mif
PETROL INJECTION
Fault finding – Interpretation of parameters17B
V42 Injection
Program No.: 2A
Vdiag No.: 04, 05, 06,
14, 16, 18
*ocr = opening cyclic ratio
PR102CANISTER BLEED SOLENOID VALVE OCR*
PA R A M E T E R
DEFINITIONThis parameter indicates the canister bleed solenoid valve opening cyclic ratio in %.
Conformity check with engine stopped and ignition on, or engine running, and engine coolant temperature > 80°C
The value must be between 0% and 100%.
V42_V04_PR102/V42_V05_PR102/V42_V06_PR102/V42_V14_PR102/V42_V16_PR102/V42_V18_PR102

17B-195
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
V2 MR-376-X76-17B050$130.mif
PETROL INJECTION
Fault finding – Interpretation of parameters17B
V42 Injection
Program No.: 2A
Vdiag No.: 04, 05, 06,
14, 16, 18
PR118MEASURED THROTTLE POSITION GANG 1
PA R A M E T E R
DEFINITIONThis parameter indicates the motorised throttle valve 1 position setpoint as a %.
Conformity check with the engine running and engine coolant temperature > 80°C
With the engine idling, the value must be a 13%.
If there is a fault, use the interpretation of DF095 Throttle potentiometer circuit gang 1.
V42_V04_PR118/V42_V05_PR118/V42_V06_PR118/V42_V14_PR118/V42_V16_PR118/V42_V18_PR118

17B-196
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
V2 MR-376-X76-17B050$130.mif
PETROL INJECTION
Fault finding – Interpretation of parameters17B
V42 Injection
Program No.: 2A
Vdiag No.: 04, 05, 06,
14, 16, 18
PR119MEASURED THROTTLE POSITION GANG 2
PA R A M E T E R
DEFINITIONThis parameter indicates the motorised throttle valve 2 position setpoint as a %.
Conformity check with the engine running and engine coolant temperature > 80°C
With the engine idling, the value must be a 13%.
If there is a fault, use the interpretation of DF096 Throttle potentiometer circuit gang 2.
V42_V04_PR119/V42_V05_PR119/V42_V06_PR119/V42_V14_PR119/V42_V16_PR119/V42_V18_PR119

17B-197
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
V2 MR-376-X76-17B050$130.mif
PETROL INJECTION
Fault finding – Interpretation of parameters17B
V42 Injection
Program No.: 2A
Vdiag No.: 04, 05, 06,
14, 16, 18
PR138RICHNESS CORRECTION
PA R A M E T E R
DEFINITIONThis parameter indicates the richness correction as a %.
Conformity check with the engine running and engine coolant temperature > 80°C
This value changes according to the richness signals from the computer.
The richness correction value must be  50%.
V42_V04_PR138/V42_V05_PR138/V42_V06_PR138/V42_V14_PR138/V42_V16_PR138/V42_V18_PR138