87B-2V1 MR-376-X76-87B000$010.mif
87B
UCH
VDiag No.: 0F
1. SCOPE OF THIS DOCUMENT
This document presents the fault finding method applicable to all computers with the following specifications:
2. PREREQUISITES FOR FAULT FINDING
Documentation type
Fault finding procedures (this document):
– Assisted fault finding (integrated into the diagnostic tool), Dialogys.
Wiring Diagrams:
– Visu-Schéma.
Type of diagnostic tools
–CLIP
Special tooling required
If the information obtained by the diagnostic tool requires the electrical continuity to be checked, connect
bornier Elé. 1622 or universal bornier Elé. 1681.
3. SAFETY INSTRUCTIONS
The safety instructions must be followed at all times when working on components in order to avoid damage or
injury:
– check the battery voltage to avoid incorrect operation of computer functions,
– use the proper tools.
*VLL — Very Long LifeVehicle(s): KANGOO VLL*Computer name: UCH
Function concerned: PASSENGER
COMPARTMENT CONNECTION UNITVdiag No.: 0F
Special tooling required:
Diagnostic tool
Multimeter
Elé. 1622Bornier
Elé. 1681Universal bornier
WARNING:
– All checks performed using bornier Elé. 1622 or Elé. 1681 must be performed with the battery disconnected.
– The bornier is only designed to be used with a multimeter. Never power the test points with 12 V.
UCH_V0F_PRELI
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding – Introduction
