2013 RENAULT KANGOO ECU

SIDE OPENING ELEMENT MECHANISMS
Front door lock
51
PRB5104
- the interior slide rail (A).
Disconnect the control linkage for locking the
door and opening it from the outside.
Remove the fittings securing the lock (B).
Disconnect the electric harness, depending on the
version.
REMOVING
After removing the trim (see section 72), remove:
12982R
12983R
- the anti-tamper shield (1) from the lock,
51-4

NON-SIDE OPENING ELEMENT MECHANISMS
Hinged rear roof flap cross member
Remove blanking cover and securing nut (A).
Release linkage (B) from its location.
Remove mounting fittings for cross member (C).
52
PRB5204
REMOVING
13247R
52-6

EXTERIOR PROTECTION
Protective panel at rear
55
REFITTING
Position clips on protective panel and secure clips
on assembly.
13255S
55-6

LOWER INTERIOR ACCESSORIES
Dashboard
- the ashtray and its bracket (two screws).
Disconnect connectors.
57
Remove fuse holder (five screws).
Unclip diagnostic socket.
12963R12965-1R
12965-1R1
Remove :
- fittings securing steering column (two nuts,
two bolts),Remove :
- heating control panel (two screws).
12963R1
57-4

LOWER INTERIOR ACCESSORIES
Dashboard
Unclip gear lever gaiter.
Remove the four mounting bolts.
Disconnect connectors.
57
Take out speaker grilles.
Remove fittings securing dashboard.
Pull dashboard gently.
Detach clips holding wiring harness.
Disconnect:
- connectors for headlight height adjustment
and hazard warning lights,
- remaining connectors (e.g. decoder).
Remove dashboard.
12964R
PRB5701
CONSOLE
57-5

UPPER INTERIOR ACCESSORIES
Upper storage compartment in cab
REMOVING
58
PRB5801
Remove fasteners securing storage compartment
(1) and sun visors.
Remove unit (A).
Take unit (B) off its bracket (C).
13249R1
58-1