38C-38V1 MR-376-X76-38C000$140.mif
ANTI-LOCK BRAKING SYSTEM
Fault finding – Command summary table38C
ABS BOSCH 8.1
Vdiag No.: 18
Tool
commandDiagnostic tool title Comments
SC001Check target teethThis command tests the condition of the teeth on each wheel.
Select the command SC001 and follow the instructions.
The test result should be equal to 48 or 44 teeth depending on
the version.
SC006Bleed the hydraulic unit and
brake circuits.This command must be used only in the event of abnormal
lengthening of brake pedal travel during a road test with ABS
regulation (the vehicle must have already been bled using the
conventional procedure).
Select command SC006 and follow the instructions given by the
diagnostic tool.
38C-43
AFTER REPAIRClear the computer memory using command RZ001 Fault memory.
Carry out a road test followed by another check with the diagnostic tool.
V1 MR-376-X76-38C000$150.mif
ANTI-LOCK BRAKING SYSTEM
Fault finding – Interpretation of commands38C
ABS BOSCH 8.1
Vdiag No.: 18
SC006BLEEDING THE HYDRAULIC UNIT AND BRAKE CIRCUITS
NOTESConditions of use of the command:
Ignition on, engine stopped and vehicle speed zero.
Before running the command, check that the battery is properly charged (see 80A,
Battery, Battery: Customer complaints).
This command must be used only in the event of abnormal lengthening of brake pedal travel during a road test with
ABS regulation (the vehicle must have already been bled using the conventional procedure).
Select command SC006 and follow the instructions given by the diagnostic tool.
ABS8.1X76_V18_SC006
