10
!
i
155
PRACTICAL INFORMATION
PEUGEOT will not accept responsi-
bility for the cost incurred in repairing
your vehicle or for rectifying malfunc-
tions resulting from the installation
of accessories not supplied and not
recommended by PEUGEOT and
not installed in accordance with its
instructions, in particular when the
combined consumption of all of the
additional equipment connected ex-
ceeds 10 milliamperes. Installing electrical accessories
Your vehicle's electrical system is
designed to operate with standard
or optional equipment.
Before installing other electrical
equipment or accessories on your
vehicle, contact a PEUGEOT deal-
er or a qualifi ed workshop.
CHANGING A FUSE
Access to the tools
The extraction tweezer is fi tted to the
back of the dashboard fusebox cover.
To gain access to it:
open the glove box lid,
push the opening guide to the left past the fi rst notch,
open the glove box lid fully,
turn the screw a quarter of a turn to the left,
unclip the fusebox cover by pulling the top right,
disengage the fusebox cover com- pletely and turn it over,
extract the support, on the back of which is fi tted the tweezer.
Changing a fuse
Before changing a fuse, it is necessary
that:
the cause of the failure be identifi ed and rectifi ed,
all electrical consumers be switched off,
the vehicle be immobilised and the ignition switched off,
the failed fuse be identifi ed using the allocation tables and drawings
in the following pages. Good
Failed
Tweezer
To change a fuse, you must:
use the special tweezer to extract the fuse from its housing and check
the condition of its fi lament,
always replace the failed fuse with a fuse of the same rating (same co-
lour); a different rating may cause
malfunctions (risk of fi re).
If the fault occurs again soon after re-
placing the fuse, have the electrical sys-
tem checked by a PEUGEOT dealer or
a qualifi ed workshop.
