2013 Peugeot 208 glove box

8
Familiarisation
10. Side adjustable air vents.
11.Front side window demisting/defrosting
vent.
12 .Instrument panel.
13. Windscreen demisting/defrosting vent. 14 .
Sunshine sensor.
15. Glove box / Passenger's airbagdeactivation.
16.Passenger's airbag.
17. Multifunction screen / Audio system.
18. Central adjustable air vents.

Instruments and controls
1.
Cruise control / speed limiter controls. 2.
Steering mounted controls for the touch screen.
3.
Wiper / screenwash / trip computer stalk. 4.
Lighting and direction indicator stalk5.
Bonnet release lever.
6.Steering wheel adjustment control.
7. Driver's airbag.
Horn. 8.Headlamp height adjustment. 9. Switch panel.
19.
Central locking and hazard warning buttons. 20.
Heating / air conditioning controls.
21.12 V accessory socket.
USB por t / auxiliary socket.
Additional USB por t.22. Open storage.
Cup holder. 23. Gear lever. 24.
Central armrest with storage. 25.Parking brake.

16
Familiarisation
Monitoring
Illumination of the lamp indicates the status of
the corresponding function. A. Activation of the Park Assist system.or
Deactivation of rear parking sensors.
Switch panel
103, 1071
.Open the glove box.2. Inser t the key.3.
Select position: "ON"
(activation), with front passenger or "forwards facing" child seat,"OFF"(deactivation), with "rear facing"child seat. 4.Remove the key keeping the switch in the
new position.


Front passenger's airbag
134
129
B.Deactivation of the DSC/ASR system.
9
4
C.Deactivation of the Stop & Start system.
52
D. Volumetric alarm monitoring off.
146
E.
Electric child lock on.

Passenger safety
A.Front seat belts not fastened or unfastened
warning lamp.
B.Airbag fault warning lamp.

Front seat belts and
passenger's front airbag
27
C.Front passenger's airbag deactivation
warning lamp.
32

1
27
Instruments and controls
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.This is may be accompanied by an audible signal and a message in the screen.
Warning / indicator lampStateCauseAction / Observations
Passenger's airbag system fixed. The control, located in the glove box,is set to the OFF
position.
The passenger's front airbag is deactivated.
In this case you can install a "rear
facing" child seat.
Set the control to the ON position to activate the passenger's front airbag.
In this case, do not fit a child seat in the rear-facing position.


Dynamic stability control(
DSC/ASR )

fix
ed. The button, located at the bottom
right of the dashboard, is pressed. Itsindicator lamp is on.
The DSC/ASR is deactivated.
DSC: dynamic stability control.
ASR: anti-slip regulation, or traction control. Press the button to activate the D
SC/ASR. Its indicator
lamp goes off.
The DSC/ASR system is activated automatically when
the vehicle is started.
If it has been deactivated, the system is reactivated
automatically from approximately 30 mph (50 km/h).

72
Comfort

















Interior fi ttings
Glove box(see details on the following page) 2.Large storage compar tment (withoutaudio system)3.12 V accessory socket(120 W)
Observe the maximum power rating toavoid damaging your accessory.4.USB port/ Auxiliar y socket(see details on following pages)5.Open storage compar tments
6.Cup holder
7.Central armrest8.Door pockets

73
3
Comfort





12 V accessory
socket

)
To connect a 12 V accessory (maximum
power: 120 Watts), lift the cover and connect a suitable adaptor.











Glove box


Its lid has locations for a pair of glasses... )To open the glove box, raise the handle.
It houses the front passenger's airbagdeactivation switch A.
If the vehicle is fitted with air conditioning, it provides access to the ventilation nozzle B , distributing the same conditioned air as the
vents in the passenger compartment.
It
gives access to the fusebox (see "Changing
a fuse").

133
6
Safety
Airbags


System designed to maximise the safety of the
occupants (with the exception of the rear centrepassenger) in the event of violent collisions.
The airbags supplement the action of the force-
limiting seat belts (with the exception of the centre rear passenger).
If a collision occurs, the electronic detectors
record and analyse the front and side impacts sustained in the impact detection zones:


- in the case of a serious impact, the airbagsare deployed instantly and contribute
towards better protection of the occupants
of the vehicle
(with the exception of the rear centre passenger); immediately after the
impact, the airbags deflate rapidly so that
they do not hinder visibility or the exit ofthe occupants,

- in the case of a minor or rear impact
or in cer tain roll-over conditions, the
airbags will not be deployed; the seat belt
alone contributes towards ensuring your protection in these situations.
The airbags do not operate whenthe ignition is switched off.
This equipment will only deploy once.
If a second impact occurs (during thesame or a subsequent accident), the airbag will not be deployed again.
Deployment of the airbag(s) is accompanied by a slight emission of smoke and a noise, due to theactivation of the pyrotechnic cartridgeincorporated in the system.This smoke is not harmful, but sensitiveindividuals may experience slight irritation.
The noise of the detonation may resultin a slight loss of hearing for a shorttime.
Impact detection zones
A.
Front impact zone.B.
Side impact zone.
Front airbags


Deployment

The airbags are deployed, except the passenger's front airbag if it has been deactivated, in the eventof a serious front impact to all or part of the front impact zone A
, in the longitudinal centreline of the
vehicle on a horizontal plane and directed from thefront to the rear of the vehicle.
The front airbag inflates between the thorax and
head of the front occupant of the vehicle and the
steering wheel, driver's side, and the dashboard,
passenger's side to cushion their forward
movement.
System which protects the driver and front
passenger in the event of a serious front impact
in order to limit the risk of injury to the head and
thorax.
The driver's airbag is fitted in the centre of the steering wheel; the front passenger's airbag isfitted in the dashboard above the glove box.

153
7
Practical information














Changing a wheel

The tools are installed in the boot under the floor.
To gain access to them: )open the boot, )lift the floor and remove it. )remove the carrier box containing the tools.


Access to the tools
List of tools *
3."Bolt cover" tool.
For removing the bolt protectors
(covers)on alloy wheels.4.Socket for the security bolts (located in theglove box).
For adapting the wheelbrace to the special
"security" bolts.
5.Towing eye.
See "Towing the vehicle".

Procedure for chan
ging a faulty wheel for the spare wheel using the tools provided with the vehicle.
All o
f these tools are specific to your
vehicle and can vary according to the level
of equipment. Do not use them for other purposes. 1.Wheelbrace. For removing the wheel trim and removing
t
he wheel bolts.2. Jack with integral handle.
For raising the vehicle.

*
Depending on country of sale.

168
Practical information




















Changing a fuse
The extraction tweezer is fitted to the back of
the fusebox cover located inside the glove box. )Open the glove box lid,)unclip the fusebox cover by pulling at the
top right,
)disengage the cover completely and turn it over,
Access to the tools
) remove the carrier on which the tweezer isfitted.