2013 Peugeot 208 ESP

WELCOME
Warning:
this symbol marks warnings which it is essential to observe for your own safety, for the safety of others or toavoid any risk of damaging your vehicle.
Information:
this symbol draws your attention to additional information for better use of your vehicle.


Protection of
the environment:

this symbol accompanies advicerelating to protection of the environment.
Page reference:
this symbol invites you to refer to the
pages which provide details of the function.
Thank
you for choosing a 208.


This handbook has been desi
gned to enable you
to make the most of your vehicle in all situations.
Therefore, on the first few pages, you will find a summary followed by a quick reference guide
intended to make it easier for you to becomefamiliar with your vehicle.
All of the details specific to your vehicle, comfort,safety, practical information, are then presented
in this handbook, to increase your appreciation of
the vehicle and to help you make the most of it.

Your vehicle is fitted with onl
y some of the equipment described in this document,depending on its trim level, version and thespecification for the country in which it was sold.

.
.
Contents
Direction indicators 125Hazard warning lamps 125Emergency or assistance call 126Horn 126ESP system 127Front seat belts 130Airbags 133Child seats 137ISOFIX child seats 143Child lock 146
Safety
Te m p o r a ry puncture repair kit 147Changing a wheel 153Snow chains 160Changing a bulb 161Changing a fuse 168Battery 174Electrical energy economy mode 177Changing a wiper blade 178To w i ng the vehicle 179To w i ng a trailer 181Fitting roof bars 183Advice on care and maintenance 184Accessories 185
Practical information
Bonnet 188Petrol engines 189Diesel engines 190Fuel tank 191Misfuel prevention (Diesel) 193Running out of fuel (Diesel) 195Checking levels 196Checks 199
Checks
Petrol engines 201Petrol weights 203Diesel engines 206Diesel weights 208Dimensions 211Identifi cation markings 212
Technical data
Emergency or assistance 213Touch screen 215Audio system / Bluetooth 275Audio system 301
Audio equipment and telematics
Visual search
Alphabetical index

4
Familiarisation
Stop & Start
This system puts the engine temporarily into standby during stops in the traffic (red lights, traffic jams, etc...). The engine restar ts automatically as soon as you want to move off. Per fectly suited to
urban use, the Stop & Start system reduces fuel consumption, exhaust emissions and thlevel when stationary.
93

Park Assist

This active parking assistance system detects
a parking space and then controls the steeringto park the vehicle.
102
Exterior
Cornering lighting
At low speed this system provides additional
lighting in corners, at junctions, when parking..., making use of the corresponding front foglamp.
11
8

16
Familiarisation
Monitoring
Illumination of the lamp indicates the status of
the corresponding function. A. Activation of the Park Assist system.or
Deactivation of rear parking sensors.
Switch panel
103, 1071
.Open the glove box.2. Inser t the key.3.
Select position: "ON"
(activation), with front passenger or "forwards facing" child seat,"OFF"(deactivation), with "rear facing"child seat. 4.Remove the key keeping the switch in the
new position.


Front passenger's airbag
134
129
B.Deactivation of the DSC/ASR system.
9
4
C.Deactivation of the Stop & Start system.
52
D. Volumetric alarm monitoring off.
146
E.
Electric child lock on.

Passenger safety
A.Front seat belts not fastened or unfastened
warning lamp.
B.Airbag fault warning lamp.

Front seat belts and
passenger's front airbag
27
C.Front passenger's airbag deactivation
warning lamp.
32

24
Instruments and controls
Operation indicator lamps
If one of the following indicator lamps comes on in the instrument panel and/or instrument panel screen, this confirms that the corresponding system has come into operation.

Warning / indicator lampStateCauseAction / Observations



Left-hand direction indicatorflashing with buzzer. The lighting stalk is pushed down.



Right-handdirection indicatorrflashing with buzzer. The lighting stalk is pushed up.
Sidelampsfixed.The lighting stalk is in the
"Sidelamps" position.
Dipped beamheadlampsfixed.The lighting stalk is in the "Dipped
beam headlamps" position.
Main beam headlampsfixed.The lighting stalk is pulled towards
you. Pull the stalk to return to dipped beam headlamps.
Front foglampsfixed.The front foglamps are switched on. Turn the ring on the stalk rear wards twice to switch off
the front foglamps.
Rear foglampfixed.The rear foglamp is switched on. Turn the ring on the stalk rear wards to switch off the
rear foglamp.

For more information on the lighting controls, refer to the corresponding section.

1
27
Instruments and controls
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.This is may be accompanied by an audible signal and a message in the screen.
Warning / indicator lampStateCauseAction / Observations
Passenger's airbag system fixed. The control, located in the glove box,is set to the OFF
position.
The passenger's front airbag is deactivated.
In this case you can install a "rear
facing" child seat.
Set the control to the ON position to activate the passenger's front airbag.
In this case, do not fit a child seat in the rear-facing position.


Dynamic stability control(
DSC/ASR )

fix
ed. The button, located at the bottom
right of the dashboard, is pressed. Itsindicator lamp is on.
The DSC/ASR is deactivated.
DSC: dynamic stability control.
ASR: anti-slip regulation, or traction control. Press the button to activate the D
SC/ASR. Its indicator
lamp goes off.
The DSC/ASR system is activated automatically when
the vehicle is started.
If it has been deactivated, the system is reactivated
automatically from approximately 30 mph (50 km/h).

28
Instruments and controls
Warning lamps
When the engine is running or the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires action on
the par t of the driver.
Any fault resulting in the illumination of a warning lamp must be investigated further by reading the associated message in the screen.
If you encounter any problems, contact a PEUGEOT dealer or a qualified workshop.
Warning / indicator lampStateCauseAction / Observations
STOPfixed, associated with another warning lamp. It is associated with the engine
oil pressure or the engine coolant temperature. Stop as soon as it is safe to do so.
Park, switch off the ignition and call a PEUGEOT
dealer or qualified workshop.
Servicefixed, associated with another warning lamp. Major faults have occurred. Refer to the section on this warning lamp and youmust then contact a PEUGEOT dealer or qualified
workshop.
fix
ed associated with a message (if a displayscreen is fitted). F
aults have occurred for which there
is no specific warning lamp. Identify the fault by reading the message shown in the screen (if a display screen is fitted) and refer to the corresponding section:
- engine oil level alert,
- risk o
f blockage of the par ticle emissions filter (Diesel).
- Diesel fuel additive level (Diesel with particle
emissions filter),
You must contact a PEUGEOT dealer or a qualified
workshop.

53
2
Access








Electric windows
1.Left hand front electric window.2.Right hand front electric window.3.Right hand rear electric window.4.Left hand rear electric window.5.Deactivating the rear electric window
switches.
Manual operation
To open or close the window, press or pull the
switch gently. The window stops as soon as theswitch is released.
Automatic one-touch
operation
(depending on version)
To open or close the window, press or pullthe switch fully: the window opens or closes completely when the switch is released.Pressing the switch again stops the movementof the window.
The electric window switches remain
operational for approximately one minute after
the key has been removed. Once this time has elapsed, the electric
windows will not operate. To reactivate them,
switch the ignition on again.

Safety anti-pinch
(depending on version)
When the window rises and meets an obstacle,it stops and immediately partially lowers again.
In the event of unwanted opening of the window
when closing automatically, press the switch
until the window opens completel
y, then pull
the switch immediately until the window closes.Continue to hold the switch for approximatelyone second after the window has closed.
The safety anti-pinch function is not activeduring this operation.


Deactivating the rear
window controls
For the safety of your children,press switch 5to prevent operation
of the windows of the rear doors,irrespective of their position.
With the warnin
g lamp on, the rear switches
are deactivated. With the warning lamp off,
the switches are active.