2013 Peugeot 208 light

[x] Cancel search: light

Page 202 of 332

Peugeot 208 2013  Owners Manual - RHD (UK, Australia) 200
Checks
Manual gearbox 
  The gearbox does not require anymaintenance (no oil change).
  Refer to the servicing and warrantybooklet for the details of the level checking interval for this component

Page 205 of 332

Peugeot 208 2013  Owners Manual - RHD (UK, Australia) 9
203
Technical data
   * 
  The kerb weight is equal to the unladen weight + driver (75 kg).  
   ** 
   
The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the to

Page 206 of 332

Peugeot 208 2013  Owners Manual - RHD (UK, Australia) 204
Technical data
Engine s 1.4 litre VTi  95 hp1.6 litre VTi  120 hp
Gearbox 
 
Manual(5-speed) 
 Manual  (5-speed)
Model codes: CC... CA... 
 8FP0 - 8FN0 
 
5FS0  
Body3-door  5-door   
 3-door

Page 207 of 332

Peugeot 208 2013  Owners Manual - RHD (UK, Australia) 9
205
Technical data
 *  The kerb weight is equal to the unladen weight + driver (75 kg).  
 **   
The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing veh

Page 210 of 332

Peugeot 208 2013  Owners Manual - RHD (UK, Australia) 208
Technical data
*   
 The kerb weight is equal to the unladen weight + driver (75 kg).  ** 
 
  The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing veh

Page 211 of 332

Peugeot 208 2013  Owners Manual - RHD (UK, Australia) 9
209
Technical data
   
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for each additional 1 000 metres o

Page 212 of 332

Peugeot 208 2013  Owners Manual - RHD (UK, Australia) 210
Technical data
each additional 1 000 metres of altitude.
The speed of a towing vehicle must not exceed 60 mph (10 0 km/h) (comply with the legislation in force in your country).
High ambient tempe

Page 238 of 332

Peugeot 208 2013  Owners Manual - RHD (UK, Australia) 05
MAP ORIENTATION
Select " Map 
".  
 
Select " Map heading 
".  
 
Select:
-
"Flat map view" to display the map in 2D,
-  
" Perspective map view" to display a perspective view. 
With " Flat ma
p vi