2013 NISSAN X-TRAIL alarm


> (GLW    0RGHO 7$@
Alert
GUID-E486 29E9-A0E6-4 E9A-8778-A498C4B794D 4
This setting allowsthecustomer toset alarms.
Select ªAlertº usingthe
switch
*
1
and press
ENTER
*
1
.
Outside Temp. (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert foroutside temperature inthe vehicle information
display .
1. Use the
switch
*
1
to select ªOutside
T emp.º .
2. Press theENTER
*
1
to turn ON/OFF thealert.
Timer:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toset analert tonotify
the driver thatthesettime hasbeen reached.
1. Use the
switch
*
1
to select ªTimerº .
2. Press theENTER
*
1
.
3. To change thetimer amount, usethe
switch
*
1
and theENTER
*
1
to save theselected time
amount.
Navigation (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert fornavigation inthe vehicle information display.
1. Use the
switch
*
1
to select ªNavigationº .
2. Press theENTER
*
1
to turn ON/OFF thealert.
Phone (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert fornavigation inthe vehicle information display.
1. Use the
switch
*
1
to select ªPhoneº .
2. Press theENTER
*
1
to turn ON/OFF thealert. Mail
(ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert fornavigation inthe vehicle information display.
1. Use the
switch
*
1
to select ªMailº.
2. Press theENTER
*
1
to turn ON/OFF thealert.
T yre pressures (ifequipped)
GUID-957 EC358-747F-4 558-9FB7-87BF7FC0C450
The settings inthe ªTyre pressuresº menuareall
related tothe Tyre pressure monitoring systemTPMS
(See ªTirePressure Monitoring System(TPMS)º (P.6-
2) ,ªTire Pressure Monitoring System(TPMS)º (P.5-4)
and ªTire Pressure Monitoring System(TPMS)º (P.8-
36) .).
. Target Front
. Target Rear
. Tyre Pressure Unit
. Calibrate
T arget Front:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ªTarget Frontº tyrepressure isthe pressure
specified forthe front tyres onthe tyre placard (See,
ªTire Pressure Monitoring System(TPMS)º (P.5-4) and
ªTire placardº (P.9-9) .).
Use the
*
1
and theENTER
*
1
buttons to
select andchange thevalue forthe ªTarget Front/
T arget frontº tyrepressure.
T arget Rear:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ªTarget Rearº tyrepressure isthe pressure
specified forthe rear tyres onthe tyre placard (see,
ªTire Pressure Monitoring System(TPMS)º (P.5-4) and
ªTire placardº (P.9-9) .).
Use the
*
1
and theENTER
*
1
buttons to
select andchange thevalue forthe ªTarget Rearº tyre
pressure. T
yre Pressure Unit:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The unitfortyre pressure thatdisplays inthe vehicle
information displaycanbechanged to:
. kPa
. psi
. bar
. Kgf/cm2
Use the
*
1
and theENTER
*
1
buttons to
select andchange theunit.
If necessary ,refer tothe following tabletoconvert
between units.
Instrume ntsand controls
2-25
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-8
Pre-d riving checks andadjustments
controller fromthevehicle. Thismayprevent the
unauthorized useofthe remote controller tounlock
the vehicle. Forinformation regardingtheerasing
procedure, contactaNISSAN dealer.
For information regardingthereplacement ofabattery ,
see ªBatteryº (P.8-20) .
USING REMOTEKEYLESS ENTRYSYSTEM
GUID-7F 0F3356-B9 C6-45AC-82 87-8F7116B BEC60
JVP0278X
T ype A(without panicalarm)
*
1
Jackknife typekeyrelease button
*
2
L OCK button
*
3
UNL OCK button
*
4
Battery indicator light
JVP0308X
T ype B(with panic alarm)
*
1
Jackknife typekeyrelease button
*
2
L OCK button
*
3
UNL OCK button
*
4
P ANIC button
*
5
Battery indicator light
Locking doors
GUID-6E92 86B0-733D-456C-B91 3-B3ED645790BA
1. Remove theignition key.
2. Close alldoors.
3. Push theªLOCKº
button
*
2
on the remote
controller.
4. Alldoors willbelocked. Thedoor lockindicator
light
(located onthe instrument panel)will
illuminate for1minutes (ifequipped) .
5. Operate doorhandles toconfirm thatthedoors
have been securely locked.
CAUTION:
After locking thedoors usingtheremote con-
troller, besure thatthedoors havebeen securely
locked byoperating thedoor handles.
Unlocking doors
GUID-9E 7A3723-4E10 -44F6-B3CE-C31959B FBFBE
1. Push theªUNL OCKº
button
*
3
on the
remote controller.
2. Alldoors willbeunlocked.
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds or
1 minute afterpushing theªUNL OCKº
button
*
3
.
. Opening anydoors.
. Inserting thekey into theignition switch.
Selective doorunlock mode(ifequipped) (Type
A) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push theªUNL OCKº
button
*
3
on the
remote controller.
2. The driver's doorunlock.
3. Push theªUNL OCKº
button
*
3
on the
remote controller again.
4. Alldoors willbeunlocked.
Selective doorunlock mode(ifequipped) (Type
B) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When youfirst receive thevehicle, thedoor unlock
mode isset tounlock allthe doors withonepush ofthe
ªUNL OCKº
button
*
3
. The door unlock mode
can beswitched tothe selective doorunlock mode,
which unlocks thepassenger's doorsatthe second
push ofthe ªUNL OCKº
button
*
3
.
Selective doorunlock mode:
1. Push theªUNL OCKº
button
*
3
on the
remote controller.
2. The driver's doorunlock.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3. Push theªUNL OCKº
button
*
3
on the
remote controller again.
4. Alldoors willbeunlocked.
T o switch tothe selective doorunlock mode,perform
the following procedure.
Push theªLOCKº
*
2
and ªUNL OCKº
buttons
*
3
simultaneously formore than5seconds.
Perform thesame procedure todeactivate the
selective doorunlock mode.
Interior lighttimer (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The interior lighttimer activates andtheinterior lights
illuminate for15 seconds whenadoor isunlocked and
the interior lightswitch isin the ªDOORº position.
The interior lightscanbeturned offwithout waitingfor
15 seconds byperforming oneofthe following
operations.
. Turning theignition switchtothe ªONº position.
. Locking thedoors withtheremote controller.
. Switching theinterior lightswitch tothe ªOFFº
position.
Using panicalarm(ifequipped)
GUID-AE 80AD4C-8C 1B-4373-A61 8-7751551A5818
If you arenear yourvehicle andfeelthreatened, you
may activate thealarm tocall attention asfollows:
1. Push theªPANICº
button
*
4
on the remote
controller formore than0.5second.
2. The theft warning alarmwillstay onfor 25
seconds.
3. The panic alarmstops when:
. Ithas runfor25 seconds, or
. Any ofthe buttons onthe remote controller are
pushed. (Note:Panicbutton should bepushed for
more than0.5second.)
Battery indicator light
GUID-661 9AA05-216 E-46A7-A14 9-C4989F148C2E
The battery indicator light
*
4
(T ype A)or
*
5
(T ype B)
illuminates whenyoupush anybutton. Ifthe light does
not illuminate, thebattery isweak orneeds replace-
ment. Forinformation regardingreplacement ofa
battery ,see ªRemote controller batteryº(P.8-21) .
HAZARD INDICATOR OPERA TION
GUID-15B92 5D3-243B-42E9-9D0F-8 48B2E6C9D1D
When youlock orunlock thedoors, thehazard
indicator willflash asaconfirmation.
. ªLOCKº: Thehazard indicator flashesonce.
. ªUNL OCKº: Thehazard indicator flashestwice.
Hazard indicator mode(forSouth AfricaandEurope)
GUID-3F DB20C1-36 93-4948-A81 7-5CA991E3FB28
DOOR LOCK DOOR
UNLOCK
Remote keylessentrysystem HAZARD
-once HAZARD-twice
Hazard indicator mode(except forSouth AfricaandEurope)
GUID-8D3 A1428-9654 -46CD-875F-C1C543C3FC2C
DOOR LOCK DOOR
UNLOCK
Remote keylessentrysystem HAZARD
-twice HAZARD-none
Pre-drivi ngchecks andadjustment s
3-9
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-18
Pre-driving checksandadjustments
Locking doors
GUID-59 C48714-709 2-416E-964F-87ABE0DE37CD
1. Place theignition switchinthe ªOFFº position and
carry theIntelligent Key .
2. Close alldoors (including theback door).
3. Push theªLOCKº button
*
A
on the Intelligent
K ey .
4. Alldoors willbelocked. Thedoor lockindicator
light
(located onthe instrument panel)will
illuminate for1minutes (ifequipped) .
5. Operate thedoor handles toconfirm thatthe
doors havebeen securely locked.
CAUTION:
After locking thedoors usingtheIntelligent Key,
be sure thatthedoors havebeen securely
locked byoperating thedoor handles.
Unlocking doors
GUID-02 C4F53F-111 C-4240-90DA-B021C839 0A59
When youfirst receive thevehicle, thedoor unlock
mode isset tounlock allthe doors withonepush ofthe
ªUNL OCKº button
*
B
. The door unlock modecanbe
switched tothe selective doorunlock mode(if
equipped) .
T o change thedoor unlock modefromonetoanother,
see ªVehicle information displayº(P.2-20) .
All door unlock mode:
1. Push theªUNL OCKº button
*
B
on the Intelligent
K ey .
2. Alldoors (including theback door) willbe
unlocked.
Selective doorunlock mode(ifequipped):
1. Push theªUNL OCKº button
*
B
on the Intelligent
K ey . 2.
The driver's doorwillbeunlocked.
3. Push theªUNL OCKº button
*
B
on the Intelligent
K ey again.
4. Alldoors (including theback door) willbe
unlocked.
Automatic relock:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds or
1 minute afterpushing theªUNL OCKº button
*
B
on
the Intelligent Key while thedoors arelocked. Ifduring
this 30seconds or1minute timeperiod, the
ªUNL OCKº button
*
B
on the Intelligent Key is
pushed, alldoors willbelocked automatically after
another 30seconds or1minute.
. Opening anydoor orback door.
. Pushing theignition switch.
Opening orclosing backdoor(ifequipped)
GUID-7A97 DFB7-E05B -4600-BFF6 -A75E59407 982
Opening:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push thepower backdoor button
*
C
for
more than1second.
2. The back doorwillautomatically open.
The hazard indicator flashes4times andtheoutside
chime sounds.
Closing:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push thepower backdoorbutton
*
C
.
2. The back doorwillautomatically close.
The hazard indicator flashes4times andtheoutside
chime sounds.
If the button
*
C
is pushed whiletheback door
is being opened orclosed, theback doorwillreverse.
Using panicalarm(ifequipped)
GUID-493 7A23C-01 2A-422A-B E61-A0FEA 679E405
If you arenear yourvehicle andfeelthreatened, you
may activate thealarm tocall attention asfollows:
1. Push theªPANICº
button
*
D
on the
Intelligent Key for more than1second.
2. The theft warning alarmandheadlights (if
equipped) willstay onfor 25 seconds.
3. The panic alarmstops when:
.
It has runfor25 seconds, or
.
Any ofthe buttons onthe Intelligent Key are
pushed. (Note:Panicbutton should bepushed
for more than1second.)
HAZARD INDICATOR AND HORN OPERA-
TION
GUID-D81 C103B-F4 9C-4165-99 66-43D3288AC0B0
When youlock orunlock thedoors orthe back door
with therequest switchorthe remote keyless entry
function, thehazard indicator willflash andthehorn or
the outside chimewillsound asaconfirmation.
The following descriptions showhowthehazard
indicator andoutside chimewillactivate whenlocking
or unlocking thedoors orback door.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-20
Pre-driving checksandadjustments
GUID-17F A495C-3D75-4AC6- BDA1-CF035 C5BC711
Y our vehicle haseither orboth ofthe following security
systems:
. Theft warning
. NISSAN Anti-theft System(NATS)*
The security condition willbeshown bythe security
indicator light.
(* immobilizer)
THEFT WARNING SYSTEM (ifequipped)
GUID-76 C0FFDE-576D -4F0F-954F-F551549C6BCD
The theft warning systemprovides visualandaudio
alarm signals ifparts ofthe vehicle aredisturbed.
Security indicator light
GUID-4DC D2AF1-FA12-44F6 -BC69-8E08 33CCECA6
SIC2045
The security indicator light,located onthe meter panel,
operates whenever theignition switchisin the ªLOCKº
or ªOFFº position. Thisisnormal.
For models withultrasonic sensor
GUID-607 4FDDD-A03 E-4D79-AE83- 4F6D45B64020
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
2. Place theignition switchinthe ªOFFº position.
3. Carry theremote controller orthe Intelligent Key
with youand getoutofthe vehicle.
4. Make surethehood andtheback doorareclosed.
Close andlock alldoors withtheremote
controller, theIntelligent Key orthe request switch.
If a door orthe hood isopen, thebuzzer will
sound. Thebuzzer willstop when thedoor is
correctly closed.
5. Confirm thatthesecurity indicator lightcomes on.
The security indicator lightblinks rapidly for
approximately 20seconds andthen blinks slowly.
The system isnow activated. If,during this20-
second timeperiod, thedoor isunlocked bythe
remote controller, theIntelligent Key orthe request
switch, orthe ignition switchisplaced inthe ªONº
position, thesystem willnot activate.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors locked andtheignition switchoff.Place
the ignition switchinthe ªONº position toturn
the system off.
If the system malfunctions, theshort beep
sounds 5times whenthesystem isactivated.
Have thesystem checked byaNISSAN dealer.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The warning systemwillgive thefollowing alarm:
. The hazard indicator blinksandthealarm sounds
intermittently forapproximately 30seconds. (The
alarm willrepeat 8times.) .
The alarm automatically turnsoffafter approxi-
mately 30seconds. However, thealarm reacti-
vates ifthe vehicle istampered withagain.
The alarm isactivated when:
. operating thedoor orthe back doorwithout using
the remote controller, theIntelligent Key orthe
request switch.
. opening thehood (ifequipped) .
. thevolumetric sensingsystem(ultrasonic sensors)
is triggered (whenitis activated) .
. thepower supply isdisconnected.
How tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop byunlocking adoor withthe
request switch(ifequipped) orthe ªUNL OCKº
button onthe Intelligent Key .
. The alarm willstop ifthe ignition switchisplaced
in the ªONº position.
Cancel switchforultrasonic sensor:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVP0311X
The ultrasonic sensors
*
A
(volumetric sensing),
located onthe ceiling, detectmovement inthe
passenger's compartment. Whenthetheft warning
system isset tothe armed position, itwill automatically
SECURITY SY STEM
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
switch onthe ultrasonic sensor.
It is possible toexclude theultrasonic (forexample,
when leaving petsinside thecar ortransporting the
vehicle onaferry) .
T o exclude theultrasonic:
1. Close allthe windows.
2. Place theignition switchinthe ªOFFº position.
3. Push thecancel switch
*
B
located onthe ceiling.
The security indicator lightwillstart flashing
rapidly .
4. Close thedoors, hoodandback door. Lockthem
using theremote controller, theIntelligent Key or
the request switch.Thesecurity indicator lightwill
start flashing fasterandabuzzer willsound once.
The ultrasonic sensorisnow excluded fromthetheft
warning system.Allother functions ofthe system
remain activated untilthetheft warning systemis
disarmed again.
For models without ultrasonic sensor
GUID-F6 883F2C-1 8CE-4385-9B AC-D9C25E45F1E2
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe ªOFFº position.
3. Remove remotecontroller orthe Intelligent Key
from thevehicle.
4. Close alldoors, hoodandback door. Lockall
doors. Thedoors canbelocked withremote
controller orthe Intelligent Key ,door handle
request switch,powerdoorlockswitch or
mechanical key. 5.
Confirm thatthesecurity indicator lightcomes on.
The security indicator lightstays onfor about 30
seconds. Thevehicle security systemisnow pre-
armed. Afterabout 30seconds thevehicle
security systemautomatically shiftsintothearmed
phase. Thesecurity lightbegins toflash once
every approximately 3seconds. If,during this30
seconds pre-armtimeperiod, thedoor isun-
locked, orthe ignition switchisplaced inªONº ,
the system willnot alarm.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors, hood,andback doorlocked withthe
ignition switchinthe ªLOCKº position. When
placing theignition switchinthe ªONº position,
the system willbereleased.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The vehicle security systemwillgive thefollowing
alarm:
. The hazard indicator orheadlight blinksandthe
horn sounds intermittently .
. The alarm automatically turnsoffafter approxi-
mately 30or50 seconds. However, thealarm
reactivates ifthe vehicle istampered withagain.
The alarm isactivated by:
. Unlocking thedoor oropening theback door
without usingthebutton onthe remote controller
or the Intelligent Key ,the door handle request
switch orthe mechanical key.(Even ifthe door is
opened byreleasing thedoor inside lockknob, the
alarm willactivate.)
. Opening thehood. How
tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop onlybyunlocking adoor by
pushing theªUNL OCKº button onthe remote
controller orthe Intelligent Key .
. The alarm willnotstop ifthe ignition switchis
placed inthe ªONº position.
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-5E4 37D07-076 E-4181-8CCF -57AFFB80C485
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Pre-driving checksandadjustments
3-21
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
screen fromtheAround ViewMonitor screenwhen:
. The shift lever isin the ªDº (Drive) position (CVT
model) orthe shift lever isout ofthe ªRº (Reverse)
position (MTmodel) ,and thevehicle speed
increases aboveapproximately 10km/h (6MPH) .
. Adifferent screenisselected.
CAMERA AIDINGCORNER SENSOR
FUNCTION (ifequipped)
GUID-0AEEE3 77-4208-4A32-97B6-7 30A3A05647 0
When thecorner ofthe vehicle movesclosertothe
object whiletheAround ViewMonitor isdisplayed, an
indicator isdisplayed andatone issounded bythe
corner sensor function towarn thedriver.
The color ofthe corner sensor indicator andthe
pattern ofthe tone varyaccording tothe distance to
the object.
K eep thecorner sensors (located onthe front andrear
bumper fascia)freefrom snow,ice and large
accumulations ofdirt. Donot clean thesensors with
sharp objects. Ifthe sensors arecovered, theaccuracy
of the corner sensor function willbediminished.
The tone sound andthesensor indicator displaycan
be turn on/off, andthevolume ofthe tone sound and
the sensor detection rangecanbeadjusted. (See
ªDriver Assistanceº (P.2-21) .)
WARNING:
. The corner sensor function isnot designed
to prevent theobject.
. The colors ofthe corner sensor indicator and
the distance guidelinesinthe front/rear
view indicate different distances tothe
object.
. Inclement weathermayaffect thefunction of
the corner sensor system; thismay include reduced
performance orafalse activation.
. This function isdesigned asan aid tothe
driver indetecting largestationary objectsto
help avoid damaging thevehicle. Thesystem
will notdetect smallobjects belowthe
bumper, andmay notdetect objects that
are too close tothe bumper oron the
ground.
. Ifyour vehicle sustains damagetothe
bumper fascia,leaving itmisaligned orbent,
the sensing zonemaybealtered causing
inaccurate measurement ofobstacles or
false alarms.
CAUTION:
Keep theinterior ofthe vehicle asquiet as
possible tohear thetone clearly.
MOVING OBJECTDETECTION (MOD)
FUNCTION (ifequipped)
GUID-6CAFFD 96-0FA6-42CB-8 531-35613FD16A94
The Moving ObjectDetection (MOD)system can
inform thedriver ofmoving objects whendriving outof
garages, maneuvering intoparking lotsand inother
such instances.
The MOD system detects movingobjects byusing
image processing technologyonthe image shown on
the display .The rear view camera isequipped withthe
automatic washerfunction usingwindow washerfluid.
The MOD system operates inthe following conditions
when thecamera viewisdisplayed:
. When theshift lever isin the ªPº (Park) orªNº
(Neutral) position(CVTmodel) orthe shift lever is
out ofthe ªRº (Reverse) position(MTmodel) and
the vehicle isstopped, theMOD system detects
the moving objects inthe bird's-eye view.The MOD
system willnotoperate ifthe outside mirror
is moving inor out orifeither doorisopened.
. When theshift lever isin the ªDº (Drive) position
(CVT model) orthe shift lever isout ofthe ªRº
(Reverse) position(MTmodel) ,and thevehicle
speed isbelow approximately 8km/h (5MPH) ,
the MOD system detects movingobjects inthe
front view.
. When theshift lever isin the ªRº (Reverse)
position andthevehicle speedisbelow approxi-
mately 8km/h (5MPH) ,the MOD system detects
moving objects inthe rear view.The MOD system
will notoperate ifthe back doorisopen.
The MOD system doesnotdetect moving objects in
the front-side view.The MOD iconisnot displayed on
the screen wheninthis view .
WARNING:
. The MOD system isnot asubstitute for
proper vehicle operation anddoes notpre-
vent contact withtheobjects surrounding
the vehicle. Whenmaneuvering, alwaysuse
the outside mirrorandinside rearview mirror
and turn andlook tocheck thesurroundings
to make sureitis safe tomaneuver.
. The system isdeactivated atspeeds above
10 km/h (6MPH) .It is reactivated atlower
speeds.
. The system isnot designed toprevent
contact withallobjects.
. The MOD system isnot designed todetect
surrounding stationaryobjects.
When theMOD system detects amoving object
surrounding thevehicle, theyellow framewillbe
displayed onthe view where theobjects aredetected
Display screen,heaterandairconditioner ,and audio system
4-15
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-50
Starting anddriving
GUID-B933B 47B-826E-4EDF-9FFF-A 382A0D7D 08E
SSD0723
T ype A
JVS0437X
T ype B
The parking sensor(sonar) systemsounds atone to
inform thedriver ofobstacles nearthebumper.
When theªDisplayº keyisON, thesensor viewwill
automatically appearinthe vehicle information display.
WARNING:
. The parking sensor(sonar) systemisa
convenience butitis not asubstitute for
proper parking. Thedriver isalways respon-
sible forsafety during parking andother
manoeuvres. Alwayslookaround andcheck
that itis safe todo sobefore parking. .
Read andunderstand thelimitations ofthe
parking sensor(sonar) system ascontained
in this section. Thecolors ofthe corner
sensor indicator andthedistance guidelines
in the front (ifequipped)/rear viewindicate
different distances tothe object. Inclement
weather orultrasonic sourcessuchasan
automatic carwash, atruck's compressed-
air brakes orapneumatic drillmay affect the
function ofthe system; thismay include
reduced performance orafalse activation. .
This function isdesigned asan aid tothe
driver indetecting largestationary objectsto
help avoid damaging thevehicle. Thesystem
is not designed toprevent contactwithsmall
or moving objects. Alwaysmoveslowly.
. The system willnotdetect smallobjects
below thebumper, andmay notdetect
objects closetothe bumper oron the
ground.
. The system maynotdetect thefollowing
objects.
Ð Fluffy objects suchassnow, cloth,
cotton, glass-wool, etc.
Ð Thin objects suchasrope, wireand
chain, etc.
Ð Wedge-shaped objects
. Ifyour vehicle sustains damagetothe
bumper fascia,leaving itmisaligned orbent,
the sensing zonemaybealtered causing
inaccurate measurement ofobstacles or
false alarms.
CAUTION:
. Keep theinterior ofthe vehicle asquiet as
possible tohear thetone clearly.
. Keep thesensors (located onthe bumper
fascia) freefrom snow, iceand large accu-
mulations ofdirt. Donot clean thesensors
with sharp objects. Ifthe sensors are
covered, theaccuracy ofthe sensor function
will bediminished.
P ARKING SENSOR (sonar)SY STEM
(if equipped)
&RQGLWLRQ
([FHSWIRU&KLQD