2013 NISSAN X-TRAIL switch


> (GLW    0RGHO 7$@
5-32
Starting anddriving
and beincontrol ofthe vehicle atall times.
. The camera unitmay notfunction properly
under thefollowing conditions:
Ð When towing atrailer (forAustralia, New
Zealand andSouth Africa).
Ð When strong lightenters thecamera
unit. (Forexample, lightdirectly shines
on the rear ofthe vehicle atsunrise or
sunset.)
Ð When ambient brightness changessud-
denly. (Forexample, whenthevehicle
enters orexits atunnel orpasses under
a bridge.)
. Ifthe camera lensisexcessively dirty,the
automatic washermaynotbeable to
completely cleanthelens. Thiscould result
in the camera notdetecting vehiclesorlane
markers.
. Excessive noise(forexample, audiosystem
volume, openvehicle window) willinterfere
with thechime sound, anditmay notbe
heard.
BSW SYSTEM OPERA TION
GUID-B0752 A1A-BABA-4290-8BA3-3341D61D 39CF
JVS0410X
Blind SpotIndicator light
SSD1029
BSW indicator (inthe Vehicle information display)
The BSW system operates aboveapproximately 32
km/h (20MPH) .
When thecamera unitdetects vehicles inthe detection
zone, theBlind SpotIndicator lightlocated insidethe
outside mirrorswillilluminate. Ifthe turn signal isthen
activated, thesystem chimes (twice)andtheBlind
Spot Indicator lightflashes toalert thedriver.
The Blind SpotIndicator lightcontinues toflash until
the detected vehicle(s) leavethedetection zone.
Detection zone
GUID-279 0FC89-562 5-4979-A03D -DDB0DA0F 2FFF
SSD1026
The camera unitcan detect vehicles oneither sideof
your vehicle whenpartofanother vehicleiswithin the
detection zoneshown asillustrated.
This detection zonetypically startsfromtheoutside
mirror ofyour vehicle andextends approximately 3m
(10 ft)behind therear bumper, andapproximately 3m
(10 ft)sideways.
NO TE:
The Blind SpotIndicator lightwillilluminate for
a few seconds whentheignition switchisplaced
in the ªONº position.
The brightness ofthe Blind SpotIndicator lightsis
adjusted automatically dependingonthe brightness of
the ambient light.
A chime sounds ifthe camera unithasalready
detected vehicleswhenthedriver activates theturn
signal. Ifa vehicle comesintothedetection zoneafter
the driver activates theturn signal, thenonlytheBlind
Spot Indicator lightflashes andnochime sounds. (See
ªBSW driving situationsº (P.5-33) .)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
SSD1029
BSW indicator (inthe Vehicle information display)
The BSW system operates aboveapproximately 32
km/h (20MPH) .
The BSW lightisshown inthe vehicle information
display ifthe Blind SpotWarning system isactive. To
switch thesystem onoroff, see thedescription laterin
this section.
When thecamera unitdetects vehicles inthe detection
zone, theBlind SpotIndicator lightlocated insidethe
outside mirrorswillilluminate. Ifthe turn signal isthen
activated, thesystem chimes (twice)andtheBlind
Spot Indicator lightflashes toalert thedriver.
The Blind SpotIndicator lightcontinues toflash until
the detected vehicle(s) leavethedetection zone.
Detection zone
GUID-2E5 8C740-C1EB -4970-9F18-8 C62C2600F46
SSD1026
The camera unitcan detect vehicles oneither sideof
your vehicle whenpartofanother vehicleiswithin the
detection zoneshown asillustrated.
This detection zonetypically startsfromtheoutside
mirror ofyour vehicle andextends approximately 3m
(10 ft)behind therear bumper, andapproximately 3m
(10 ft)sideways.
The brightness ofthe Blind SpotIndicator lightsis
adjusted automatically dependingonthe brightness of
the ambient light.
A chime sounds ifthe camera unithasalready
detected vehicleswhenthedriver activates theturn
signal. Ifa vehicle comesintothedetection zoneafter
the driver activates theturn signal, thenonlytheBlind
Spot Indicator lightflashes andnochime sounds. (See
ªBSW driving situationsº (P.5-33) .)
T urning onoroff the BSW system
GUID-14F6 DA85-8579-4 2BD-89B5-D01358F25 13E
The BSW system isturned onoroff using thesettings
menu inthe vehicle information display.
S Y STEM ON:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The BSW indicator (white)inthe vehicle information
display willappear.
S Y STEM OFF:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The BSW indicator inthe vehicle information display
will turn off.
Perform thefollowing stepstoenable ordisable the
BSW system.
1. Use the
button untilªSettingsº displaysinthe
vehicle information display.Use the
to select
ªDriver Assistanceº .Then press theENTER
button.
2. Select ªDriving Aidsº,and press theENTER
button.
3. To set the BSW system toon oroff, use the
buttons tonavigate inthe menu andusethe
ENTER buttontoselect ªBlind Spotºandpress
the ENTER button.
WARNING:
. The camera unitmay notbeable todetect
when certain objects arepresent suchas:
Ð Pedestrians, bicycles,animals
Ð Some typesofsmall vehicles suchas
motorcycles andvery short length vehi-
cles
Ð Oncoming vehicles
Ð Avehicle approaching rapidlyfrombe-
hind. (SeeªBSW driving situationsº (P.5-
33) .)
Starting anddriving
5-37
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
ENTER buttontoselect ªLaneº andpress the
ENTER button.
TEMPORAR YDISABLED STATUS AT HIGH
TEMPERA TURE
GUID-67A7 ECBE-6ACC- 40A7-9D0F-1C44280C8D 44
If the vehicle isparked indirect sunlight underhigh
temperature conditions(overapproximately 408C
(1048F) andthen started, theLDW system maybe
deactivated automatically .The ªHigh cabintempera-
tureº warning message willappear inthe vehicle
information display.
When theinterior temperature isreduced, theLDW
system willresume operating automatically .
MUL TI-SENSING CAMERAUNITMAINTE-
NANCE
GUID-C19 E3F82-C5B C-4AC8-B5 4F-DD97FCD DFBCC
JVI0975X
The multi-sensing cameraunit
*
1
for the LDW system
is located onthe windshield infront ofthe inside
rearview mirror.To maintain theproper operation ofthe
LDW system andprevent asystem malfunction besure
to observe thefollowing:
. Always keepthewindshield clean.
. Donot attach asticker (including transparent
material) orinstall anaccessory nearthemulti-
sensing lanecamera unit. .
Donot place reflective materials, suchaswhite
paper oramirror, onthe instrument panel.The
reflection ofsunlight mayadversely affectthe
multi-sensing cameraunit'sdetection capability.
. Donot strike ordamage theareas around the
camera unit.Donot touch thecamera lensor
remove thescrew located onthe camera unit.If
the camera unitisdamaged duetoan accident,
contact aNISSAN dealer.
GUID-790 A193B-4EB1 -4E55-89F5-8BFBAFBA 326A
The speed limiterallows youtoset the desired vehicle
speed limit.While thespeed limiterisactivated, the
driver canperform normalbraking andacceleration,
but thevehicle willnot exceed thesetspeed.
WARNING:
. Always observe postedspeedlimits.Donot
set the speed overthem.
. Always confirm thesetting statusofthe
speed limiter onthe vehicle information
display.
When thespeed limiterison, the cruise control system
cannot beoperated.
SPEED LIMITER OPERATIONS
GUID-7D727D 12-89FC-4770-A277-89 9333D04B46
The speed limitercanbeset ataspeed between 30to
200 km/h (20to124 MPH)
.
JVS0427X
The speed limitersetswitches arelocated onthe
steering wheel.
1. CANCEL switch
2. RES/+ switch
3. SET/


> (GLW    0RGHO 7$@
5-42
Starting anddriving
5. Speed limiterMAINswitch
(When thisswitch ispushed, thespeed limiter
enters thestandby mode.Ifthe cruise control
system ison, the system willturn offand the
speed limiterenters thestandby
mode.)
JVS0284X
The speed limiteroperating conditionisshown onthe
vehicle information display.
1. Speed limiterindicator
2. Setspeed indicator
The speed unitcanbeconverted betweenªkm/hºand
ªMPHº .(See ªVehicle information displayº(P.2-20) .)
When thevehicle speedexceeds thesetspeed limit,
the setspeed indicator blinksandtheaccelerator
pedal operation willnotwork untilthevehicle speed
slows downtothe setspeed limit.
The speed limiter willnotautomatically reduce
the vehicle speedtothe setspeed limit.
T urning onspeed limiter
GUID-E3 6A4E9E-7B02 -40E6-850F-C E30FD8CA1A8
Push thespeed limiterMAINswitch. Thespeed limiter
and thesetspeed indicators illuminateonthe vehicle
information display.
Setting speedlimit
GUID-207 6BDD2-77 12-4CD9-9E7 B-EA71752B2BC2
1. Push theSET/


> (GLW    0RGHO 7$@
set speed isexceeded anddriver intervention isnot
detected.
T urning thespeed limiteroff
GUID-604082 45-BB35-4F90-884A-8 3477F15BB08
The speed limitersystem willbeturned offwhen oneof
the following operations isperformed:
. Push thespeed limiterMAINswitch. Thespeed
limiter indicator andthesetspeed indicator onthe
vehicle information displaywillbeturned off.
. Push thecruise control MAINswitch. Thespeed
limiter information onthe vehicle information will
be replaced withthecruise control information.
For details seeªCruise controlº (P.5-43) .
. When thevehicle isstopped andtheignition is
placed tothe offposition.
T urning offthe speed limiterwillerase thesetspeed
limit memory .
Speed limitermalfunction
GUID-56D 8A157-AB4B- 4429-9C83-5333E82C8D98
If the speed limitermalfunctions, thespeed limiteron
the vehicle information displaywillflash.
T urn thespeed limiterMAINswitch offand have the
system checked byaNISSAN dealer.
T32A130 827-FF5B4 88B-DD40- 465E-8AD4-B D88C01B8 0E9
JVS0180X
Models without speedlimiter
JVS0427X
Models withspeed limiter
1. CANCEL switch
2. ACCELERA TE/RESUME switch
3. COAST/SET switch
4. Cruise control MAINswitch
5. Speed limiterMAINswitch
WARNING:
. Always observe theposted speedlimitsand
do not setthe speed overthem.
. Donot use thecruise control whendriving
under thefollowing conditions. Doingso
could cause aloss ofvehicle control and result
inan accident.
Ð When itis not possible tokeep the
vehicle ataconstant speed
Ð When driving inheavy traffic
Ð When driving intraffic thatvaries speed
Ð When driving inwindy areas
Ð When driving onwinding orhilly roads
Ð When driving onslippery (rain,snow, ice,
etc .)roads
CAUTION:
On manual Transmission (MT)model, donot
shift tothe ªNº (Neutral) positionwithout
depressing theclutch pedalwhenthecruise
control isoperated. Shouldthisoccur, depress
the clutch pedalandturn thecruise control MAIN
switch offimmediately. Failuretodo somay
cause engine damage.
PRECAUTIONS ONCRUISE CONTROL
T32A1308 27-DF670F 83-9B80-4A99-B18B-0 4CB9B1ECB D9
. Ifthe cruise control system malfunctions, itwill
cancel automatically .The CRUISE indicator inthe
vehicle information displaywillthen blink towarn
the driver.
. Ifthe CRUISE indicator blinks,turnthecruise
control MAINswitch offand have thesystem
checked byaNISSAN dealer.
. The CRUISE indicator mayblink when thecruise
control MAINswitch isturned ONwhile pushing
the ACCELERA TE/RESUME, COAST/SETor
CANCEL switch.To properly setthe cruise control
system, perform thefollowing procedures.
Starting anddriving
5-43
CRUISE
CONTROL (ifequippe d)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-44
Starting anddriving
CRUISE CONTROL OPERATIONS
T32A1308 27-4BD70 071-615A-4B E0-8E01-02D3FB02318A
The cruise control allowsdriving atspeeds above40
km/h (25MPH) without keeping yourfootonthe
accelerator pedal.
For gasoline enginemodels, thecruise control will
automatically becanceled ifthe vehicle slowsdown
more thanapproximately 13km/h (8MPH) below the
set speed.
For diesel engine models, thecruise control will
automatically becanceled ifthe vehicle speedslows
to less than approximately 35km/h (22MPH) .
Moving theshift lever tothe ªNº (Neutral) positionwill
cancel andtheCRUISE indicator willoff.
T urning oncruise control
T32A1308 27-D9A26350-0978 -4C2D-81F7 -A433A8DD2D61
Push theMAIN switch. TheCRUISE indicator inthe
vehicle information displaywillappear.
Setting cruising speed
T32A1308 27-C830EB 0E-975B-4C 65-891B-9EDAAA4D8E3 E
1. Accelerate tothe desired speed.
2. Push theCOAST/SET switchandrelease it.
3. Take your footoffthe accelerator pedal.
The vehicle willmaintain thesetspeed.
Passing anothervehicle:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Depress theaccelerator pedaltoaccelerate. After
releasing theaccelerator pedal,thevehicle willreturn
to the previously setspeed.
The vehicle maynotmaintain thesetspeed when
going upordown steep hills.Insuch cases, drive
without thecruise control. Resetting
toslower speed:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Use anyone ofthe following methodstoreset toa
slower speed.
. Lightly tapthefoot brake pedal. When thevehicle
reaches thedesired speed,pushandrelease the
COAST/SET switch.
. Push andhold theCOAST/SET switch.Whenthe
vehicle reaches thedesired speed,release the
COAST/SET switch.
. Quickly pushandrelease theCOAST/SET switch.
This willreduce thevehicle speedbyabout 1km/h
or 1MPH.
Resetting tofaster speed:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Use anyone ofthe following methodstoreset toa
faster speed.
. Depress theaccelerator pedal.Whenthevehicle
reaches thedesired speed,pushandrelease the
COAST/SET switch.
. Push andhold theACCELERA TE/RESUME
switch. Whenthevehicle reaches thedesired
speed, release theACCELERA TE/RESUME
switch.
. Quickly pushandrelease theACCELERA TE/
RESUME switch.Thiswillincrease thevehicle
speed byabout 1km/h or1MPH.
Resuming atpreset speed:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push andrelease theACCELERA TE/RESUME switch.
The vehicle willresume thelast setcruising speed
when thevehicle speedisover 40km/h (25MPH) .
Cancelling cruisingspeed
T32A130 827-D50DF32 4-B09E-4323-8AC9-3 5C0187CD15 A
Use anyone ofthe following methodstocancel theset
speed.
. Push theCANCEL switch.
. Tap the foot brake pedal.
. Push thecruise control MAINswitch. TheCRUISE
indicator willturn off.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-46
Starting anddriving
Ð When driving onasteep downhill slope
or roads withsharp curves.
Ð When towing atrailer.
. Insome roadortraffic conditions, the
forward emergency brakingsystemmay
unexpectedly pushtheaccelerator pedalup
or apply partial braking. Whenacceleration
is necessary, continuetodepress theaccel-
erator pedaltooverride thesystem.
. Braking distances increaseonslippery sur-
faces.
. Excessive noisewillinterfere withthewarn-
ing chime sound, andthechime maynotbe
heard.
. The system isdesigned toautomatically
check thesensor's functionality, withincer-
tain limitations. Thesystem maynotdetect
some forms ofobstruction ofthe sensor
area ofthe front bumper suchasice, snow,
stickers, forexample. Inthese cases, the
system maynotbeable towarn thedriver
properly. Besure thatyoucheck, cleanand
clear thesensor areaofthe front bumper
regularly.
T urning theforward emergency brakingsys-
tem ON/OFF
GUID-91AA4 E9D-2919-400F-B632-6E 30412A721C
Perform thefollowing stepstoturn theforward
emergency brakingsystemONorOFF .
1. Using the
switches andtheENTER button
on the leftside ofthe steering wheel,selectthe
Settings menuinthe vehicle information display.
(See ªSettingsº (P.2-21) .)
2. Using the
switches andtheENTER button,
navigate tothe [Driver Assistance] menu,followed by
the [Driving Aids]menu.
3. Inthe [Driving Aids]menu, highlight the[Emer-
gency Brake] itemandusetheENTER buttonto
toggle between ON(enabled) orOFF (disabled) .
JVS0299X
When theforward emergency brakingsystemisturned
off, the forward emergency brakingsystemwarning
light (orange) willilluminate.
System temporarily unavailable
GUID-450 42812-084 F-4AD4-831 C-D92669CF 9587
Condition A:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When theradar sensor picksupinterference from
another radarsource, makingitimpossible todetect a
vehicle ahead,theforward emergency brakingsystem
is automatically turnedoff.The forward emergency
braking systemwarning light(orange) andthedriver
assist system forward indicator (orange)willilluminate.
Action totake:
When theabove conditions nolonger exist,the
forward emergency brakingsystemwillresume auto-
matically . Condition
B:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When thesensor areaofthe front bumper iscovered
with dirtorobstructed, makingitimpossible todetect a
vehicle ahead,theforward emergency brakingsystem
is automatically turnedoff.The forward emergency
braking systemwarning light(orange) willilluminate
and theªfront radarobstructionº warningmessage will
appear inthe vehicle information display.
Action totake:
If the warning light(orange) comeson,park thevehicle
in asafe location andturn theengine off.Check tosee
if the sensor areaofthe front bumper isblocked. Ifthe
sensor areaofthe front bumper isblocked, removethe
blocking material.Restarttheengine. Ifthe warning
light continues toilluminate, havetheforward emer-
gency braking systemchecked byaNISSAN dealer.
System malfunction
GUID-03AB 42D0-B4F4-4 D8F-9706-47A73CB97E06
If the forward emergency brakingsystemmalfunctions,
it will beturned offautomatically ,a chime willsound,
the forward emergency brakingsystemwarning light
(orange) willilluminate andthewarning message
[Malfunction] willappear inthe vehicle information
display .
Action totake:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
If the warning light(orange) comeson,park thevehicle
in asafe location, turntheengine offand restart the
engine. Ifthe warning lightcontinues toilluminate, have
the forward emergency brakingsystemchecked bya
NISSAN dealer.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
GUID-75 53A2A8-03 70-4910-AC8 8-82CE83F 86111
JVS0185X
The ECO mode system helpstoenhance thefuel
economy bycontrolling theengine andCVT operation
automatically toavoid rapidacceleration.
T o turn onthe ECO mode system, pushtheECO
switch. TheECO mode indicator appearsonthe
meter.
T o turn offthe ECO mode, pushtheECO switch again.
The ECO mode indicator willturn off.
. TheECO mode system cannotbeturned offwhile
the accelerator pedalisdepressed evenifthe
ECO switch ispushed toOFF .Release the
accelerator pedaltoturn offthe ECO mode
system.
. TheECO mode system willturn offautomatically if
a malfunction occursinthe system.
. Turn offthe ECO mode system whenacceleration
is required suchaswhen:
Ð driving withaheavy loadofpassengers or
cargo inthe vehicle
Ð driving onasteep uphillslope
ECO PEDAL GUIDEFUNCTION
GUID-DDE3 E3BA-F896-46E1-926E -74DCB96AEB 2E
JVS0201X
Use theECO Pedal Guide function forimproving fuel
economy .
When theECO Pedal Guide barisin the green range
*
1
, it indicates thatthevehicle isdriven withinrange
of economy drive.
If the ECO Pedal Guide barisout ofthe green range, it
indicates thattheaccelerator pedalisdepressed over
the range ofeconomy drive.
The ECO Pedal Guide barisnot displayed when:
. The cruise control system (ifequipped) isoperat-
ing.
. The vehicle speedisless than approximately 4
km/h (2MPH) .
. Theshift lever isin the ªPº (Park) ,ªNº (Neutral) or
ªRº (Reverse) position.
T o activate ordeactivate theECO Pedal Guide
function, seeªSettingsº (P.2-21) .
AMBIENT ECO
GUID-9809F FEA-AECE-41 2F-A92C-66A486882 392
JVS0200X
The ambient ECO
*
1
is displayed according tothe
accelerator pedaloperation, whiledriving thevehicle in
ECO mode.
The ambient ECOwillilluminate inthe directions of
*
2
as the driving pattern becomes moreECO friendly .
T o activate ordeactivate theambient ECO,see
ªSettingsº (P.2-21) .
The ambient ECOisnot displayed inthe following
conditions
. The vehicle speedisunder 10km/h (6MPH) .
. Theshift lever isin the ªPº (Park) ,ªNº (Neutral) or
ªRº (Reverse) position.
. The cruise control system (ifequipped) isoperat-
ing.
Starting anddriving
5-47
ECO
MODE SY STEM (ifequipped)
&RQGLWLRQ
([FHSWIRU&KLQD