2013 NISSAN X-TRAIL sensor


> (GLW    0RGHO 7$@
2-32
Instrument sand controls
38. System faultwarning (ifequipped)
GUID-43C 11339-8D1 5-4211-B3C2-ACB485 99F434
This warning appears whentheLane Departure
W arning system isnot functioning properly.(See
ªLane Departure Warning (LDW) system (ifequipped
for Europe)º (P.5-39) .)
39. System faultwarning (ifequipped)
GUID-3B629 DD1-B4DF-4 353-8E61-E9312DBC4985
This warning appears whentheBlind SpotWarning
system isnot functioning properly.(See ªBlind Spot
W arning (BSW) system(ifequipped forEurope) º
(P .5-36) .)
40. Not available CleanRearCamera warning
(if equipped)
GUID-E57 C5D68-F44 0-4AEA-8ED 4-056CE64C7 1DA
This warning appears ifdirt, rainorsnow accumulates
on the rear camera andcannot beremoved bythe
automatic washerandblower. SeeªBlind Spot
W arning (BSW)/Lane DepartureWarning (LDW)
systemsº (P.5-31) .
41. Not available CleanRearCamera warning
(if equipped)
GUID-A081 A902-5C70-4E 43-B3D2-71F9A3651D6 9
This warning appears ifdirt, rainorsnow accumulates
on the rear camera andcannot beremoved bythe
automatic washerandblower. SeeªBlind Spot
W arning (BSW) system(ifequipped forEurope) º
(P .5-36) .
42. CVT System Faultwarning (forContinu-
ously Variable Transmission (CVT)models)
GUID-CD1 EE263-9177 -4863-B0D7-3235AB4C 2F77
This warning appears whenthereisamalfunction with
the CVT system. Ifthis warning comeson,have the
system checked byaNISSAN dealer.
43. Navigation indicator(ifequipped)
GUID-A0A CEBD4-5BC B-4F36-B594 -C27D3C61E41C
This indicator appearswhenacorner pointiscoming.
44. Stop/Start SystemorIdling StopSystem
indicator (ifequipped)
GUID-983E 95D3-0E17 -413D-8088 -8197FA3E767D
This indicator showstheStop/Start SystemorIdling
Stop System status.SeeªStop/Start SystemorIdling
Stop Systemº (P.5-18) .
45. System faultwarning (ifequipped)
GUID-444 4650A-081A- 4768-8521-583068E7E 6C0
This warning appears whentheDriver Attention Alert
system malfunctions.
For more details, seeªDriver Attention Alertº(P.2-36) .
46. System faultwarning (ifequipped)
GUID-38 9FB697-B26 8-42F7-AF08-1A20E8CA DE9C
This warning appears whentheTraffic SignRecogni-
tion system malfunctions.
For more details, seeªTraffic SignRecognitionº (P.2-
37) .
47. System faultwarning (ifequipped)
GUID-6BC 03A52-AC77 -4150-B41E-C37ED5C 2E7C1
This warning appears whentheforward emergency
braking systemmalfunctions.
For more details, seeªForward emergency braking
systemº (P.5-45) .
48. Not Available FrontRadar Obstruction
warning (ifequipped)
GUID-B9 18C838-18 FC-4E97-93 CB-4724CE4 7BDC3
If the sensor areaofthe front bumper iscovered with
dirt orobstructed, makingitimpossible todetect a
vehicle ahead,theforward emergency brakingsystem
is automatically turnedoff.The forward emergency
braking systemwarning light(orange) willilluminate
and the[Not Available FrontRadar Obstruction]
warning message willappear inthe vehicle information
display .If the [Not Available FrontRadar Obstruction]
warning message appears,parkthevehicle inasafe location
andturn theengine off.
Check tosee ifthe sensor areaofthe front bumper is
blocked. Ifthe sensor areaofthe front bumper is
blocked, removetheblocking material.Restartthe
engine. Ifthe warning lightcontinues toilluminate, have
the forward emergency brakingsystemchecked bya
NISSAN dealer.
49. Not available Highcabin temperature
warning (ifequipped)
GUID-DACEB 17F-898D-45A8-ABF0-07A3 42413B64
This warning appears ifthe interior temperature ofthe
vehicle hasreached suchahigh temperature thatthe
sensor forthe Traffic SignRecognition andLane
Departure warningsystems cannolonger function
reliably .Once theinterior temperature hasreached
normal levels,thewarning shoulddisappear.
If the warning continues todisplay ,have thesystem
checked byaNISSAN dealer.
50. Parking SensorSystem Faultwarning (if
equipped)
GUID-558 1C82C-9384 -4E26-9F4E-2540581 91995
This warning illuminates whenthereisaproblem with
the parking sensorsystem. Ifthis warning comeson,
have thesystem checked byaNISSAN dealer.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
OIL CONTROL SYSTEM (fordiesel engine
model)
GUID-F5 E35C98-7F 4D-4E23-96 65-7CEF2B F92803
JVI0988X
When theignition switchisin the ªONº position,
engine oilinformation isdisplayed.
Engine oilinformation informsthedistance tooil
change, oillevel indication andmalfunction ofoil level
sensor.
1. Distance tooil change
GUID-0C6CE 119-CD5D-44E4-907C-B2 8ACCB06747
The distance tooil change isdisplayed ifthe distance
to oil change isless than 1,500 km(930 miles) .
2. Oil replacement indicator
GUID-537 E1CBF-A948-4E30-B E63-AC30F4 7F8075
When thesetmileage approaches, theengine oil
replacement indicatorwillappear onthe display .After
the oilischanged, resetthedistance tooil change. The
oil replacement indicatorwillnot bereset automati-
cally .To reset thisindicator, seeªSettingsº (P.2-21) .
The distance tooil change intervalcannotbeadjusted
manually .The distance tooil change intervalisset
automatically .
CAUTION:
If the oilreplacement indicatorisdisplayed,
change theengine oilassoon aspossible.
Operating yourvehicle withdeteriorated oilcan
damage theengine.
3. Low level reminder
GUID-B0 ADD144-90CE-4C0F-B F0D-306D7D7AFEF0
If the low level indicator isdisplayed, theengine oil
level islow .If the low level reminder isdisplayed, check
the level using theengine oildipstick. (SeeªEngine oilº
(P .8-10) .)
CAUTION:
The oillevel should bechecked regularly using
the engine oildipstick. Operating withan
insufficient amountofoil can damage theengine
andsuch damage isnot covered bythe
warranty.
4. Oil level sensor warning
GUID-A 99E9E17-02 61-4EDD-8396-B6B68F FB9EAF
If the oilsensor warning isdisplayed, theengine oil
level sensor maybemalfunctioning. ContactaNISSAN
dealer immediately .
Instrume ntsand controls
2-33
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-40
Instrument sand controls
position
T32A1308 27-7DA4961D-ADB9-4 8C2-AF3E-CB8FF4FAA66E
The
position turnsonthe headlights inaddition to
the other lights.
AUT Oposition (ifequipped)
T32A1308 27-42005CFF -F09D-4D2E-B51A-E A900BA8AB9 5
When theignition switchisin the ªONº position and
the headlight switchisin the ªAUT Oºposition, the
headlights, frontclearance lights,instrument panel
lights, rearcombination lightsandother lights turnon
automatically dependingonthe brightness ofthe
surroundings.
The headlights willturn onautomatically attwilight orin
rainy weather (whenthewindshield wiperisoperated
continuously) .
When theignition switchisplaced inthe ªLOCKº or
ªOFFº position, thelights willturn offautomatically
.
JVI0510X
CAUTION:
Do not place anyobjects ontop ofthe sensor
*
A
. The sensor senses thebrightness leveland
controls theautolight function.Ifthe sensor is
covered, itreacts asifitis dark, andthe
headlights willilluminate.
Headlight beam
T32A130 827-9CEFEA 7E-F212-4D2D -A4BD-2DF 2318D931E
JVI0856X
T ype A
JVI0994X
T ype B
T o turn onthe high beam, pushthelever towards the
front position
*
1
.
T o turn offthe high beam, returnthelever tothe neutral
position
*
2
.
T o flash theheadlights, pullthelever towards the
rearmost position
*
3
. The headlights canbeflashed
even when theheadlights arenot on.
If equipped, whenthelever ispulled towards the
rearmost position
*
3
after theignition switchis
placed inthe ªOFFº orªLOCKº position, theheadlight
will turn onand stay onfor 30 seconds. Thelever can be
pulled 4times forupto2minutes.
High beam assist (ifequipped)
GUID-A9E4 4EB1-B8C0 -468F-A5B4 -1A9C35090997
The high beam assist system willoperate whenthe
vehicle isdriven atspeeds ofapproximately 40km/h
(25 MPH) andabove. Ifan oncoming vehicleorleading
vehicle appears infront ofyour vehicle whenthe
headlight highbeam ison, the headlight willbe
switched tothe low beam automatically .
Precautions onhigh beam assist:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
WARNING:
. The high beam assist system isaconve-
nience butitis not asubstitute forsafe
driving operation. Thedriver should remain
alert atall times, ensure safedriving prac-
tices andswitch thehigh beam andlow
beam manually whennecessary.
. The high beam orlow beam maynotswitch
automatically underthefollowing condi-
tions. Switch thehigh beam andlowbeam
manually.
Ð During badweather (rain,fog,snow,
wind, etc.).
Ð When alight source similar toahead-
light ortail light isin the vicinity ofthe
vehicle.
Ð When theheadlights ofthe oncoming
vehicle orthe leading vehicleareturned
off, when thecolor ofthe light is
affected duetoforeign materials on
the lights, orwhen thelight beam is
out ofposition.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Ð When thereisasudden, continuous
change inbrightness.
Ð When driving onaroad thatpasses over
rolling hills,oraroad thathaslevel
differences.
Ð When driving onaroad withmany
curves.
Ð When asign ormirror-like surfaceis
reflecting intenselighttowards thefront
of the vehicle.
Ð When thecontainer, etc.being towed by
a leading vehicleisreflecting intense
light.
Ð When aheadlight onyour vehicle is
damaged ordirty.
Ð When thevehicle isleaning atan angle
due toapunctured tire,being towed,
etc .
. The timing ofswitching thelow beam and
high beam maychange underthefollowing
situations.
Ð The brightness ofthe headlights ofthe
oncoming vehicleorleading vehicle.
Ð The movement anddirection ofthe
oncoming vehicleandtheleading vehi-
cle.
Ð When onlyonelight onthe oncoming
vehicle orthe leading vehicleisillumi-
nated.
Ð When theoncoming vehicleorthe lead-
ing vehicle isatwo-wheeled vehicle. Ð
Road conditions (incline,curve,theroad
surface, etc.).
Ð The number ofpassengers andthe
amount ofluggage.
High beam assist operations:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVI0974X
T ype A
JVI0996X
T ype B
T o activate thehigh beam assist system, turnthe
headlight switchtothe ªAUT Oºposition
*
1
and push
the lever forward
*
2
(high beam position) .The high
beam assist indicator lightinthe meter willilluminate
while theheadlights areturned on.
If the high beam assist indicator lightdoes not illuminate
inthe above condition, itmay indicate that
the system isnot functioning properly.Have thesystem
checked byaNISSAN dealer.
When thevehicle speedlowers toless than approxi-
mately 25km/h (16MPH) ,the headlight remainsthe
low beam.
T o turn offthe high beam assist system, turnthe
headlight switchtothe
position orselect thelow
beam position byplacing thelever inthe neutral
position.
Ambient imagesensor maintenance:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
JVI0975X
The ambient imagesensor
*
1
for the high beam
assist system islocated infront ofthe inside rearview
mirror. To keep theproper operation ofthe high beam
assist system andprevent asystem malfunction, be
sure toobserve thefollowing:
. Always keepthewindshield clean.
. Donot attach asticker (including transparent
material) orinstall anaccessory neartheambient
image sensor.
. Donot strike ordamage theareas around the
ambient imagesensor. Donot touch thesensor
lens thatislocated onthe ambient imagesensor.
If the ambient imagesensor isdamaged duetoan
Instrume ntsand controls
2-41
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-48
Instrument sand controls
stops inmid-operation.
T o replace thewiper arm,place thewiper arminthe
down position andthen push thelever
*
4
up once.
CAUTION:
. This function canbeoperated evenifthe
ignition switchisin the ªONº position.
However, toprevent anaccident ordamage
when pulling upthe wiper arm,besure to
observe thefollowing precautions.
Ð Make suretheshift lever isin the P
(Park) position (Continuously Variable
T ransmission models).
Ð Make suretheshift lever isin the N
(Neutral) position,withtheparking
brake fullyapplied (Manual Transmis-
sion models) .
Ð Never allowthepassengers tooperate
the windshield wiperswitch inadver-
tently.
. Donot operate thewindshield wiperwhile
the wiper armispulled up.The wiper arm
may bedamaged.
W asher operation
T32A1308 27-21697BA D-DFC6-4CE F-960C-0801925AAFF9
T o operate thewasher, pullthelever toward therear of
the vehicle
*
5
until thedesired amountofwasher fluid
is spread onthe windshield.
The headlight cleaner(ifequipped) willalso operate
with operation ofthe windshield washer.SeeªHead-
light cleanerº (P.2-44) . Wiper
dripwipe system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The wiper willalso operate onceabout 3seconds after
the washer andwiper areoperated. Thisoperation isto
wipe washer fluidthathasdripped onthe windshield.
T o activate ordeactivate thisfunction, seeªSettingsº
(P .2-21) .
RAIN-SENSING AUTOWIPER SYSTEM (if
equipped)
T32A130827- BB2BDD70-8BF2-41F6-9D29-E9D90 CC5CEE6
JVI0866X
T ype A
JVI0997X
T ype B
The rain-sensing autowiper system canautomatically
turn onthe wipers andadjust thewiper speed
depending onthe rainfall andthevehicle speedby
using therain sensor located onthe upper partofthe windshield.
T o set the rain-sensing autowiper system, pushthe
lever down tothe AUT Oposition
*
1
. The wiper will
sweep oncewhile theignition switchisin the ªONº
position.
The rainsensor sensitivity levelcanbeadjusted by
turning theknob toward thefront
*
2
(High) ortoward
the rear
*
3
(Low) .
. High ÐHigh sensitive operation
. Low ÐLow sensitive operation
T o turn therain-sensing autowiper system off,push up
the lever tothe ªOFFº position, orpull down thelever
to the other.
CAUTION:
. Donot touch therain sensor andaround it
when thewiper switch isin the AUTO
position andtheignition switchisin the
ªONº position. Thewipers mayoperate
unexpectedly andcause toan injury ora
wiper damage.
. When thewindshield glassiscoated with
water repellent, thespeed ofthe rain-sen-
sing auto wipers maybehigher eventhough
the amount ofthe rainfall issmall.
. Besure toturn offthe rain-sensing auto
wiper system whenyouuseacar wash.
. The rain-sensing autowipers maynotoper-
ate ifrain does nothitthe rain sensor evenif
it is raining.
. Using genuine wiperblades isrecom-
mended forproper operation ofthe rain-
sensing autowiper system. (SeeªWiper
bladesº (P.8-18) forwiper blade replace-
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
AUT ODOOR LOCK RELEASING ME-
CHANISM (ifequipped)
GUID-36A04 998-9598-400F-B45B- 06047938F4B7
All doors willbeunlocked automatically whenthe
following conditions:
. When theignition switchismoved fromªONº to
ªOFFº position (ModelwithInteligent Key system) .
. When thekey isremoved fromtheignition switch
(Model without Inteligent Key system) .
T o activate ordeactivate autodoor lock
releasing mechanism
GUID-89 452CDF-DF63 -4ACF-ADB8-70F2E88058DF
T o activate ordeactivate theauto door lockreleasing
mechanism, performthefollowing procedures.
1. Place theignition switchinthe ªONº position.
2. Within 20seconds, pushandhold thepower door
lock switch tothe ªUNL OCKº position for5
seconds.
3. Thehazard indicator lightwillflash asfollows ifthe
switching operationissuccessful:
. Twice -activated
. Once -deactivated
IMP ACT SENSING DOORLOCK RELEAS-
ING MECHANISM (ifequipped)
GUID-5CDB 8DB8-4681-4AD3-A0 7E-61787DFC 0BF0
All doors willbeunlocked automatically whenthe
impact sensors senseanimpact whiletheignition
switch isin the ªONº position.
CHILD SAFETY REARDOOR LOCK
T32A130 827-E55E27 C5-78A5-4FE2-BD03-FB77D52CECA 4
JVP0279X
The child safety reardoor locks helpprevent reardoors
from being opened accidentally ,especially whensmall
children areinthe vehicle.
When thelevers areinthe lock position
*
1
, the child
safety reardoor locks engage andtherear doors can
only beopened bythe outside doorhandles.
T o disengage, movethelevers tothe unlock position
*
2
.
GUID-DDCAA B14-63C3-4708-8092 -786E6F2E53FA
The remote keyless entrysystem canoperate alldoor
locks (including theback door) using theremote
controller. Theremote controller canoperate ata
distance ofapproximately 1m (3.3 ft)away fromthe
vehicle. Theoperating distancedepends uponthe
conditions aroundthevehicle.
As many as4remote controllers canbeused withone
vehicle. Forinformation aboutthepurchase anduseof
additional remotecontrollers, contactaNISSAN deal-
er.
The remote controller willnotfunction underthe
following conditions:
. When thedistance between theremote controller
and vehicle ismore thanapproximately 1m (3.3
ft) .
. When theremote controller batteryisdischarged.
. When thekey isin the ignition switch.
CAUTION:
. When locking thedoors usingtheremote
controller, besure nottoleave thekey inthe
vehicle.
. Donot allow theremote controller, which
contains electrical components, tocome
into contact withwater orsalt water. This
could affect thesystem function.
. Donot drop theremote controller.
. Donot strike theremote controller sharply
against another object.
. Donot place theremote controller foran
extended periodinan area where tempera-
tures exceed 608C(1408F) .
If aremote controller islost orstolen, NISSAN
recommends erasingtheIDcode ofthat remote
Pre-drivi ngchecks andadjustment s
3-7
REMO
TEKEYLESS ENTRYSY STEM
(if equipped)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-20
Pre-driving checksandadjustments
GUID-17F A495C-3D75-4AC6- BDA1-CF035 C5BC711
Y our vehicle haseither orboth ofthe following security
systems:
. Theft warning
. NISSAN Anti-theft System(NATS)*
The security condition willbeshown bythe security
indicator light.
(* immobilizer)
THEFT WARNING SYSTEM (ifequipped)
GUID-76 C0FFDE-576D -4F0F-954F-F551549C6BCD
The theft warning systemprovides visualandaudio
alarm signals ifparts ofthe vehicle aredisturbed.
Security indicator light
GUID-4DC D2AF1-FA12-44F6 -BC69-8E08 33CCECA6
SIC2045
The security indicator light,located onthe meter panel,
operates whenever theignition switchisin the ªLOCKº
or ªOFFº position. Thisisnormal.
For models withultrasonic sensor
GUID-607 4FDDD-A03 E-4D79-AE83- 4F6D45B64020
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
2. Place theignition switchinthe ªOFFº position.
3. Carry theremote controller orthe Intelligent Key
with youand getoutofthe vehicle.
4. Make surethehood andtheback doorareclosed.
Close andlock alldoors withtheremote
controller, theIntelligent Key orthe request switch.
If a door orthe hood isopen, thebuzzer will
sound. Thebuzzer willstop when thedoor is
correctly closed.
5. Confirm thatthesecurity indicator lightcomes on.
The security indicator lightblinks rapidly for
approximately 20seconds andthen blinks slowly.
The system isnow activated. If,during this20-
second timeperiod, thedoor isunlocked bythe
remote controller, theIntelligent Key orthe request
switch, orthe ignition switchisplaced inthe ªONº
position, thesystem willnot activate.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors locked andtheignition switchoff.Place
the ignition switchinthe ªONº position toturn
the system off.
If the system malfunctions, theshort beep
sounds 5times whenthesystem isactivated.
Have thesystem checked byaNISSAN dealer.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The warning systemwillgive thefollowing alarm:
. The hazard indicator blinksandthealarm sounds
intermittently forapproximately 30seconds. (The
alarm willrepeat 8times.) .
The alarm automatically turnsoffafter approxi-
mately 30seconds. However, thealarm reacti-
vates ifthe vehicle istampered withagain.
The alarm isactivated when:
. operating thedoor orthe back doorwithout using
the remote controller, theIntelligent Key orthe
request switch.
. opening thehood (ifequipped) .
. thevolumetric sensingsystem(ultrasonic sensors)
is triggered (whenitis activated) .
. thepower supply isdisconnected.
How tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop byunlocking adoor withthe
request switch(ifequipped) orthe ªUNL OCKº
button onthe Intelligent Key .
. The alarm willstop ifthe ignition switchisplaced
in the ªONº position.
Cancel switchforultrasonic sensor:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVP0311X
The ultrasonic sensors
*
A
(volumetric sensing),
located onthe ceiling, detectmovement inthe
passenger's compartment. Whenthetheft warning
system isset tothe armed position, itwill automatically
SECURITY SY STEM
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
switch onthe ultrasonic sensor.
It is possible toexclude theultrasonic (forexample,
when leaving petsinside thecar ortransporting the
vehicle onaferry) .
T o exclude theultrasonic:
1. Close allthe windows.
2. Place theignition switchinthe ªOFFº position.
3. Push thecancel switch
*
B
located onthe ceiling.
The security indicator lightwillstart flashing
rapidly .
4. Close thedoors, hoodandback door. Lockthem
using theremote controller, theIntelligent Key or
the request switch.Thesecurity indicator lightwill
start flashing fasterandabuzzer willsound once.
The ultrasonic sensorisnow excluded fromthetheft
warning system.Allother functions ofthe system
remain activated untilthetheft warning systemis
disarmed again.
For models without ultrasonic sensor
GUID-F6 883F2C-1 8CE-4385-9B AC-D9C25E45F1E2
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe ªOFFº position.
3. Remove remotecontroller orthe Intelligent Key
from thevehicle.
4. Close alldoors, hoodandback door. Lockall
doors. Thedoors canbelocked withremote
controller orthe Intelligent Key ,door handle
request switch,powerdoorlockswitch or
mechanical key. 5.
Confirm thatthesecurity indicator lightcomes on.
The security indicator lightstays onfor about 30
seconds. Thevehicle security systemisnow pre-
armed. Afterabout 30seconds thevehicle
security systemautomatically shiftsintothearmed
phase. Thesecurity lightbegins toflash once
every approximately 3seconds. If,during this30
seconds pre-armtimeperiod, thedoor isun-
locked, orthe ignition switchisplaced inªONº ,
the system willnot alarm.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors, hood,andback doorlocked withthe
ignition switchinthe ªLOCKº position. When
placing theignition switchinthe ªONº position,
the system willbereleased.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The vehicle security systemwillgive thefollowing
alarm:
. The hazard indicator orheadlight blinksandthe
horn sounds intermittently .
. The alarm automatically turnsoffafter approxi-
mately 30or50 seconds. However, thealarm
reactivates ifthe vehicle istampered withagain.
The alarm isactivated by:
. Unlocking thedoor oropening theback door
without usingthebutton onthe remote controller
or the Intelligent Key ,the door handle request
switch orthe mechanical key.(Even ifthe door is
opened byreleasing thedoor inside lockknob, the
alarm willactivate.)
. Opening thehood. How
tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop onlybyunlocking adoor by
pushing theªUNL OCKº button onthe remote
controller orthe Intelligent Key .
. The alarm willnotstop ifthe ignition switchis
placed inthe ªONº position.
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-5E4 37D07-076 E-4181-8CCF -57AFFB80C485
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Pre-driving checksandadjustments
3-21
&RQGLWLRQ
([FHSWIRU&KLQD