2013 NISSAN MAXIMA engine

[x] Cancel search: engine

Page 365 of 444

NISSAN MAXIMA 2013 A35 / 7.G Owners Manual Your NISSAN has been designed to have mini-
mum maintenance requirements with long ser-
vice intervals to save you both time and money.
However, some day-to-day and regular mainte-
nance is essential

Page 367 of 444

NISSAN MAXIMA 2013 A35 / 7.G Owners Manual Seat beltsCheck that all parts of the seat belt
system (for example, buckles, anchors, adjusters
and retractors) operate properly and smoothly,
and are installed securely. Check the belt web-
bing for

Page 368 of 444

NISSAN MAXIMA 2013 A35 / 7.G Owners Manual where mud and dirt may have accumulated. See
the “Appearance and care” section of this
manual.
Windshield-washer fluid*Check that there is
adequate fluid in the reservoir. When performing any insp

Page 369 of 444

NISSAN MAXIMA 2013 A35 / 7.G Owners Manual CAUTION
●Do not work under the hood while the
engine is hot. Turn the engine off and
wait until it cools down.
● Avoid contact with used engine oil and
coolant. Improperly disposed engine
oil, eng

Page 370 of 444

NISSAN MAXIMA 2013 A35 / 7.G Owners Manual 1. Power steering fluid reservoir
2. Engine oil filler cap
3. Brake fluid reservoir
4. Air cleaner
5. Fuse block/ Fusible links
6. Battery
7. Fusible links
8. Engine oil dipstick
9. Radiator cap
10. D

Page 371 of 444

NISSAN MAXIMA 2013 A35 / 7.G Owners Manual WARNING
●Never remove the radiator or coolant
reservoir cap when the engine is hot.
Wait until the engine and radiator cool
down. Serious burns could be caused
by high pressure fluid escaping from
t

Page 372 of 444

NISSAN MAXIMA 2013 A35 / 7.G Owners Manual CHECKING ENGINE COOLANT
LEVEL
Check the coolant levelin the reservoir when
the engine is cold. If the coolant level is below
the MIN level
B, add coolant to the MAX level
A. If the reservoir is empt

Page 373 of 444

NISSAN MAXIMA 2013 A35 / 7.G Owners Manual CHECKING ENGINE OIL LEVEL
1. Park the vehicle on a level surface and applythe parking brake.
2. Start the engine and let it idle until it reaches operating temperature.
3. Turn off the engine. Wait mo