2013 MITSUBISHI LANCER SPORTBACK fuse

[x] Cancel search: fuse

Page 628 of 706

MITSUBISHI LANCER SPORTBACK 2013 8.G Owners Manual Vehicle care and maintenance
7-47
7
1. Open the fuse lid and pull to remove it. 2. For  vehicles  equipped  with  the  bottom  cover,  use  the
puller to loosen the 2 clips (A) and push down the botto

Page 629 of 706

MITSUBISHI LANCER SPORTBACK 2013 8.G Owners Manual 7-48 Vehicle care and maintenance
7
NOTEWhen finished, be sure to return the puller to the fuse
block in the engine compartment.3. To put back the fuse lid, line up the fuse lid hook (B) with
the cla

Page 630 of 706

MITSUBISHI LANCER SPORTBACK 2013 8.G Owners Manual Vehicle care and maintenance
7-49
7
Engine compartmentIn the engine compartment, the fuse block is located as shown
in the illustration. 
1. Push the lock lever.
2. Remove the fuse block cover.
Fuse l

Page 631 of 706

MITSUBISHI LANCER SPORTBACK 2013 8.G Owners Manual 7-50 Vehicle care and maintenance
7
Passenger compartment fuse location tablePassenger compartment fuse location
Sub fuse block Main fuse block
No.
Symbol
Electrical system
Capacity
1 Heater 30 A*
2St

Page 632 of 706

MITSUBISHI LANCER SPORTBACK 2013 8.G Owners Manual Vehicle care and maintenance
7-51
7
*- Fusible link
Some fuses may not be installed on your vehicle, depend-
ing on the vehicle model or specifications.
The table above shows the main equipment corr

Page 634 of 706

MITSUBISHI LANCER SPORTBACK 2013 8.G Owners Manual Vehicle care and maintenance
7-53
7
Some fuses may not be installed on your vehicle, depend-
ing on the vehicle model or specifications.
The table above shows the main equipment corresponding
to eac

Page 635 of 706

MITSUBISHI LANCER SPORTBACK 2013 8.G Owners Manual 7-54 Vehicle care and maintenance
7
Fuse replacement 
N00954900085
1. Before replacing a fuse, always turn off the electrical item
connected to the fuse and turn the ignition switch to the
“LOCK”

Page 636 of 706

MITSUBISHI LANCER SPORTBACK 2013 8.G Owners Manual Vehicle care and maintenance
7-55
7
4. Use the fuse location diagrams and the matching tables, to
check the fuse that is related to the problem. If the fuse is
not blown, something else must be causin
Page:   < prev 1-8 9-16 17-24 next >