2013 MITSUBISHI LANCER stop start

Watching DVDs 9-3
Visual
Return PlaybackA speci ed range determined on the disk beforehand
can be played.
1 Touch [Return] during playback
NOTE
possible.
Playback Marks
Playing
(Blinking when stopped for resume play)
Stopped
Paused
Fast forwarding
Rewinding
Slow motion playback
“MENU” DVD menu playing
Operations Menu
Touch the screen during DVD playback to
enable the operations menu screen.
eng_a407
Playback Using Search

1 Touch [Search] in the operations
menu screen

2 Touch [Title] or [Chapter]
eng_a409
3 Enter the number, and touch [Enter]
eng_a410
Playback is started from the speci ed title or chapter.
Playback Using Numerical InputsPlayback can be selected by entering the number of
the chapter or title.
1 Touch [No. Entry] in the operations
menu screen
2 Touch the number of the desired
chapter or title
eng_a411
3 Touch [Enter]
eng_a412
Playback is started from the speci ed title or chapter.
NOTE
\b \b
\f \

  \b \b
\f

Trip 10-6
NOTE

touch [Reset] to reset the average speed and
average fuel economy.
Driving Distance and Time
The distance to empty, distance driven
after refueling and driving time can be
viewed on the 2/3 Trip screen.
Distance to Empty
The displayed distance to empty is calculated from
the current remaining fuel and the recent average fuel
economy.
Distance Driven After RefuelingDisplays automatically the distance driven after
refueling.
It is reset when the vehicle is refueled.
NOTE2.6 gallons (10 litres), automatic reset will not be
performed. Press [Refuel] to reset.
Driving TimeMeasures the time from when the ignition switch is
turned “ON” to when it is turned “OFF”.
It is reset when the ignition switch is turned from “OFF”
to “ON”.
Lap Time
Time, distance, speed and mileage can be
measured.

1 Display the 3/3 Trip screen

2 Touch [Start]
eng_a210
Total Line
eng_a213The measurement starts. At this time, the speed and
mileage are being measured, so they are not displayed.
3 Touch [Lap]
eng_a214The current measurement results are displayed in “A”.
NOTE
Touch [Lap] again
and the measurement
results displayed in
“A” are moved to
“B”, and the current
measurement results
are displayed in “A”.
eng_a215
4 Touch [Stop]
eng_a216The measurements stop and the measurement results
are displayed in the total line.
NOTE
where they stopped.
turned “OFF” during measurement. If this happens,
the measurements restart when the ignition switch is
turned “ON”.
5 Touch [Reset]
\b \b
\f \


 \b \b
\f