Page 274 of 626

Features and controls
3-187
3
Information screen display list
N00557900066
When there is information to be announced, such as light reminder, the tone sounds and the screen switches to the displays shown
below. Refer to the appropriate page and take the necessary measures.
When the cause of the warning display is eliminated, the warning display goes out automatically.
Refer to “Warning display list (With ignition switch in the “OFF” position)” on page 3-188.
Refer to “Warning display list (With ignition switch in the “ON” position)” on page 3-191.
Refer to “Other interrupt displays (With ignition switch in the “ON” position)” on page 3-196.NOTEIn the following cases, a warning may be displayed on the information screen and the buzzer may sound for a few seconds, at
times.
This is caused by the system picking up interference such as strong electromagnetic waves or noise, and is not a functional
problem.
• An extremely strong electromagnetic wave is received from a source such as an illegal radio set, a spark from a wire, or a
radar station.
• Abnormal voltage or a static electricity discharge is generated by the operation of your vehicle’s electronics (including after-
market parts).
If the warning display has occurred a number of times, take your vehicle to an authorized Mitsubishi Motors dealer or a repair
facility of your choice and have the system checked.
BK0150900US.book  187 ページ  2012年5月7日 月曜日 午後12時9分 
         
        
        
     
        
        Page 275 of 626
3-188 Features and controls
3
Warning display list (With ignition switch in the “OFF” position)
N00558000194
Screen
Cause
Do this (Reference)
You have forgotten to remove the key 
from the ignition switch.Remove the key.
Refer to “Key reminder system” on 
page 3-55.
You have forgotten to turn off the 
lights.Refer to “Light auto-cutout function (head-
lights and other lights)” on page 3-206.
The theft-alarm system is operating. Refer to “Theft-alarm system” on page 3-63.
Immobilizer is registered. Refer to “Customer key programming 
(Except for vehicles sold in Canada)” on 
page 3-7.
Refer to “Customer F.A.S.T.-key program-
ming (Except for vehicles sold in Canada)” 
on page 3-42.
BK0150900US.book  188 ページ  2012年5月7日 月曜日 午後12時9分 
         
        
        
     
        
        Page 278 of 626
Features and controls
3-191
3
Warning display list (With ignition switch in the “ON” position)
N00558100212
Screen
Cause
Do this (Reference)
There is a fault in the F.A.S.T.-key. Refer to “F.A.S.T.-key” on page 3-17.
BK0150900US.book  191 ページ  2012年5月7日 月曜日 午後12時9分 
         
        
        
     
        
        Page 279 of 626

3-192 Features and controls
3
Immobilizer is registered. Refer to “Customer key programming 
(Except for vehicles sold in Canada)” on 
page 3-7.
Refer to “Customer F.A.S.T.-key program-
ming (Except for vehicles sold in Canada)” 
on page 3-42.
The brake fluid level is low.
There is a fault in the brake system.Park the vehicle in a safe place and 
inspect it.
If the light still illuminates after the 
inspection, contact an authorized 
Mitsubishi Motors dealer or a repair 
facility of your choice for assistance.
Refer to “Brake warning display” on 
page 3-201.
There is a fault in the Anti-lock brak-
ing system.Avoid sudden braking and high-speed 
driving, park the vehicle in a safe 
place, and take corrective measures. 
Refer to “Anti-lock braking system 
warning light / display” on page 3-127.
The tire pressure in one of the tires 
(except spare tire) is low.Refer to “Tire pressure monitoring system 
warning light / display” on page 3-146.
There is a fault in the Tire pressure 
monitoring system.Refer to “Tire pressure monitoring system 
warning light / display” on page 3-146.
Screen
Cause
Do this (Reference)
BK0150900US.book  192 ページ  2012年5月7日 月曜日 午後12時9分 
         
        
        
     
        
        Page 280 of 626
Features and controls
3-193
3
One of the doors or the trunk lid is not 
completely closed.
The open door is displayed.Close the door or trunk lid.
Refer to “Door ajar warning display 
screen (With ignition switch in the 
“ON” position)” on page 3-174.
The engine hood is open.Close the engine hood.
Refer to “Engine hood” on page 7-4.
The engine is overheated.Park the vehicle in a safe place and 
take corrective measures.
Refer to “Engine overheating” on page 
6-6.
The Twin Clutch SST fluid tempera-
ture is increased.Park the vehicle in a safe place and 
take corrective measures.
Refer to “Twin Clutch SST” on page 3-
96.
The seat belt is not fastened when the 
ignition switch is in the “ON” position.Wear your seat belt properly. Refer to 
“Driver’s seat belt reminder/warning 
light and display” on page 2-16.
Screen
Cause
Do this (Reference)
BK0150900US.book  193 ページ  2012年5月7日 月曜日 午後12時9分 
         
        
        
     
        
        Page 281 of 626

3-194 Features and controls
3
There is a fault in the fuel system.Contact an authorized Mitsubishi 
Motors dealer or a repair facility of 
your choice to have the system 
checked.
The vehicle is being driven with the 
parking brake still applied.Release the parking brake. Refer to 
“Brake warning display” on page 3-
201.
There is a fault in the engine oil circu-
lation system.Park your vehicle in a safe place as 
soon as possible and contact an autho-
rized Mitsubishi Motors dealer or a 
repair facility of your choice to have 
the system checked.
Refer to “Oil pressure warning” on 
page 3-203.
There is a fault in the charging system.Park your vehicle in a safe place as 
soon as possible and contact an autho-
rized Mitsubishi Motors dealer or a 
repair facility of your choice for assis-
tance.
Refer to “Charging system warning 
display” on page 3-200.
There is a fault in the SRS airbag or the 
pre-tensioner system.Contact an authorized Mitsubishi 
Motors dealer or a repair facility of 
your choice to have the system 
checked.
Refer to “SRS warning light/display” 
on page 2-42.
Screen
Cause
Do this (Reference)
BK0150900US.book  194 ページ  2012年5月7日 月曜日 午後12時9分 
         
        
        
     
        
        Page 282 of 626

Features and controls
3-195
3
There is a fault in the Active stability 
control (ASC).Contact an authorized Mitsubishi 
Motors dealer or a repair facility of 
your choice to have the system 
checked.
Refer to “Active stability control 
(ASC)” on page 3-130.
There is a fault in the S-AWC (Super-
All Wheel Control).Contact an authorized Mitsubishi 
Motors dealer or a repair facility of 
your choice to have the system 
checked.
Refer to “S-AWC (Super-All Wheel 
Control)” on page 3-120.
A safety device in the Twin Clutch SST 
has been activated due to a possible 
malfunction in the Twin Clutch SST or 
in the engine electronic control mod-
ule.Contact an authorized Mitsubishi 
Motors dealer or a repair facility of 
your choice to have the system 
checked.
Refer to “Twin Clutch SST” on page 3-
96.
The fuel is running low.Refuel as soon as possible. Refer to 
“Fuel remaining warning display” on 
page 3-170.
The outside temperature is 37°F (3°C) 
or less.Be careful driving on frozen ground.
The ground may be frozen even when 
this warning is not displayed, so drive 
carefully.
Screen
Cause
Do this (Reference)
BK0150900US.book  195 ページ  2012年5月7日 月曜日 午後12時9分 
         
        
        
     
        
        Page 285 of 626

3-198 Features and controls
3Indicators
N00519900127
Turn signal indicators/Hazard warning lights
N00520000216
The arrows will flash in time with the corresponding exterior
turn signals when the turn signal lever is used.
Both arrows will flash when the hazard warning flasher switch
is pressed.NOTEIf the indicator flashes faster than usual or if the indicator
stays on without flashing, check for a malfunctioning turn
signal light bulb or turn signal connection.High beam indicator
N00520100086
A blue light comes on when the headlights are on high beam.Front fog light indicator
N00520200191
This indicator comes on while the front fog lights are on.Position indicator
N00551300026
This indicator light illuminates while the position lights are on.
Warning lights
N00520300147
Brake warning light
N00520400483
This light comes on when the ignition switch is turned to the
“ON” position (engine off).
When the engine is started, the light should go off a few sec-
onds later. A warning is also displayed in the multi-information
display.
The warning light also illuminates after starting the engine
under the following conditions.
When the parking brake is still applied.
When the brake fluid level is low.
When the brake system circuit is not working properly.
Before driving, be sure that the parking brake is fully released
and brake warning light is off.NOTEUnder conditions such as sporty driving, the brake fluid in
the tank may move and the warning light may come on
temporarily.
If the warning light goes out after a while, there is not a
problem with the brake system and the vehicle can be
driven normally.
BK0150900US.book  198 ページ  2012年5月7日 月曜日 午後12時9分