2013 MERCEDES-BENZ SLK-Class buttons

Service products
Brake fluid ..................................... 351
Coolant (engine) ............................ 351
Engine oil ....................................... 350
Fuel ................................................ 348
Important safety notes ..................348
Washer fluid .................................. .352
Settings
Factory (on-board computer) .........203
On-board computer .......................203
Setting the air distribution ...............127
Setting the airflow ............................127
SETUP (on-board computer) .............208
Side impact air bag .............................43
Side marker lamp Changing bulbs (rear) ....................114
Side marker lamp (display
message) ............................................ 224
Side windows Cleaning ......................................... 284
Convenience closing feature ............83
Important safety information ...........82
Opening/closing (all) .......................82
Opening/closing (front) ...................82
Overview .......................................... 82
Problem (malfunction) .....................85
Resetting ......................................... 84
SmartKey
Changing the battery .......................73
Changing the programming .............72
Checking the battery .......................73
Convenience opening feature ..........83
Display message ............................ 240
Door central locking/unlocking .......71
Important safety notes ....................70
Loss ................................................. 75
Mechanical key ................................ 72
Opening/closing the roof ................87
Overview .......................................... 70
Positions (ignition lock) .................135
Problem (malfunction) .....................75
Starting the engine ........................137
Snow chains ...................................... 311
Sockets Center console .............................. 261
General notes ................................ 261
Under the armrest .........................261Spare wheel
Stowing .......................................... 340
Specialist workshop ............................ 23
Special seat bel tretractor .................. 58
Speed ,controlling
see Cruise control
Speedometer
Activating/deactivating the
additional speedometer .................204
Digita l............................................ 197
In the Instrument cluster .................29
Segments ...................................... 193
Selecting the unit of measurement 203
see Instrument cluster
SPORT handling mode
Activating/deactivating (AMG
vehicles) .......................................... 63
Warning lamp ................................. 247
SRS (Supplemental Restraint
System)
Display message ............................ 219
Introduction ..................................... 39
Warning lamp ................................. 249
Warning lamp (function) ................... 39
Standing lamps
Display message ............................ 224
Switching on/off ........................... 108
Starting (engine) ................................ 137
Steering (display message) ..............239
Steering wheel Adjusting (electrically). ....................99
Adjusting (manually )........................ 98
Button overview ............................... 31
Buttons (on-board computer) ......... 194
Cleaning ......................................... 286
Important safety notes ....................98
Paddle shifters ............................... 148
Storing settings (memory function) 103
Steering wheel paddle shifters ........148
Stopwatch (RACETIMER) ................... 208
Stowage areas ................................... 256
Stowage compartments Armrest (under) ............................. 257
Center console .............................. 257
Cuph olders ................................... 259
Door ............................................... 257
Eyeglasses compartment ...............257 Index
15

Overhea
dcontrol panel Function Page
0003
0012
Switches the left-
hand reading lamp on/off 111
0004
0003
Switches the interior
lighting on/off 112
0024
000C
Operates MAGIC SKY
CONTROL 91
0023
0012
Switches the right-
hand reading lamp on/off 111
0021
0019
Switches the
automatic interio rlighting
control on/off 112
0022
Eyeglasses compartment
257 Function Page
0015
0008
MB Info call button
(mbrace system) 268
0016
Rear-view mirror 100
0017
Buttons for the garage door
opener 264
0018
0006
Roadside Assistance
call button (mbrace
system) 267
0019
0007
SOS button (mbrace
system) 26634
Overhead control panelAt a glance

X
To unloc kthe vehicle: touch the inner
surface of the door handle.
X To loc kthe vehicle: touch sensor
surface 0003.
X Convenience closing feature: touch
recessed sensor surface 0004for an
extended period (Y page 83).
Further information on the convenience
closing feature (Y page 83).
If you pull on the handl eofthe trunk lid, only
the trunk of the vehicle is unlocked. Changing the settings of the locking
system
You can change the settings of the locking
system. This means only the driver's door, the
lockable stowage compartments in the
vehicle interior and the fuel filler flap are
unlocked when the vehicle is unlocked. This
is useful if you frequently travel on your own.
X To change the setting: press and hold
down the 0010and000F buttons
simultaneously for approximately six
seconds until the battery check lamp
flashes twice (Y page 73).
i If the setting of the locking system is
changed within the signal range of the
vehicle, pressing the 000For0010 button:
R locks or
R unlocks the vehicle The SmartKey now functions as follows:
X
To unlock the driver's door: press the
0010 button once.
X To unlock centrally: press the0010
button twice.
X To lock centrally: press the000Fbutton.
The KEYLESS-GO function is changed as
follows:
X To unlock the driver's door: touch the
inner surface of the door handle on the
driver's door.
X To unlock centrally: touch the inner
surface of the front-passenger door handle.
X To lock centrally: touch the outer sensor
surface on one of the door handles.
X To restore the factory settings: press
and hold down the 0010and000F buttons
simultaneously for approximately six
seconds until the battery check lamp
flashes twice (Y page 73). Mechanical key
General notes If the vehicle can no longer be locked or
unlocked with the SmartKey, use the
mechanical key.
If you use the mechanical key to unlock and
open the driver's door or the trunk lid, the
anti-theft alarm system will be triggered
(Y
page 67).
There are several ways to turn off the alarm:
X To turn the alarm off with the
SmartKey: press the0010or000F button
on the SmartKey.
or
X Insert the SmartKey into the ignition lock.
or
X To deactivate the alarm with KEYLESS-
GO: press the Start/Stop button in the
ignition lock. The SmartKey must be in the
vehicle. 72
SmartKeyOpening/closing

X
Press mechanical key 0004into the opening
in the key in the direction of the arrow until
battery compartment cover 0003opens.
When doing so, do not hold battery
compartment cover 0003shut.
X Remove battery compartment cover 0003.X
Repeatedly tap the SmartKey against your
palm until battery 0024falls out.
X Inser tthe new battery with the positive
terminal facing upwards. Use a lint-free
cloth to do so.
X Make sure that the surface of the battery is
free from lint, grease and all other forms of
contamination.
X Insert the front tabs of battery
compartment cover 0003into the housing
and then press to close it.
X Insert mechanical key 0004into the
SmartKey.
X Check the function of all SmartKey buttons
on the vehicle. 74
SmartKeyOpening/closing

Automatic locking feature
0003
Disarming
0004 Arming
X To disarm: press and hold button 0003for
about five seconds until a tone sounds.
X To arm: press and hold button 0004for about
five seconds until a tone sounds.
i If you press one of th etwo buttons and
do not hear a tone, the relevant setting has
already been selected.
The vehicle is locked automatically when the
ignitio nis switched on and the wheels are
turning.
You could therefore lock yourselfo ut if:
R the vehicle is being pushed.
R the vehicle is being towed.
R the vehicle is on a roller dynamometer.
You can also switch the automatic locking
function on and off using the on-board
computer (Y page 206). Unlocking the driver's door
(mechanical key)
If the vehicle can no longer be unlocked with
the SmartKey, use the mechanical key.
If you use the mechanical key to unlock and
open the driver's door, the anti-thef talarm
system will be triggered ( Ypage 67). X
Take the mechanical key out of the
SmartKey (Y page 72).
X Insert the mechanical key into the lock of
the driver's door as far as it will go. X
Turn the mechanical key counter-clockwise
to position 0006.
The door is unlocked.
X Turn the mechanical key back and remove
it.
X Insert the mechanical key into the
SmartKey. Locking the vehicle (mechanical key)
If the vehicle can no longer be locked with the
SmartKey, use the mechanical key.
X Open the driver's door.
X Close the front-passenger door and the
trunk lid.
X Press the locking button (Y page 77).
X Check whether the locking knob on the
front-passenger door is still visible. If
necessary, press the locking knob down by
hand (Y page 77).
X Close the driver's door.
X Take the mechanical key out of the
SmartKey (Y page 72).
X Insert the mechanical key into the lock of
the driver's door as far as it will go. 78
DoorsOpening/closing

Install or remove the wind screen only when
the vehicle is stationary. G
WARNING
If the wind screen is not correctly engaged, it
may break free and thus obstruct traffic
behind you or lead to an accident.
Each time before driving with the roof down,
check that the wind screen is properly
engaged.
! Install or remove the wind screen only
when the roof is open. You could otherwise
damage the wind screen or the vehicle
interior.
The wind screen offers protection from the
wind when driving with the roof down.
The wind screen can be installed or removed
from the driver's side or passenger side.
Perform operations involving the wind screen
preferably on the side facing away from
traffic, after you have stopped the vehicle,
paying attention to road and traffic
conditions.
Installing and removing the winds creenPreparing for installation
Preparing for installation from the lef
tside of the
vehicle (example)
0003 Wind screen
0004 Locked latch
0024 Unlocked latch
X The following conditions must be fulfilled
for installation: R
unlocking buttons Rand Lpoint in the
direction of travel.
R latch 0024facing you is unlocked.
R latch 0004facing away from you is locked.
X To unlock the latch: press unlocking
button Ror Lon the locked latch.
X To lock th elatch: push the unlocked latch
upwards by hand until it engages.
Installing Installatio
nfrom the left side of the vehicle
(example)
X Stop the vehicle, paying attention to road
and traffic conditions.
X Take the wind screen out of the trunk.
X Prepare for installing (Y page 89).
X Hold wind screen 0003at an angle and slide
it with locked latch 0004in the direction of
arrow 0023into the bracket of the opposite
roll bar.
X Press wind screen 0003on the side of the
vehicle facing you downwards in the
directio nofarrow0021until it engages.
Make sure that studs 0022and latch 0024fit
into the respective brackets.
X Check whethe rwind screen 0003is fully
inserted into all four brackets and is sitting
securely.
X If this is not the case, remove wind
screen 0003again and repeat the steps
above. Roof
89Opening/closing Z

X
Push release lever 0003down completely in
the direction of the arrow.
The steering column is unlocked.
X Adjust the steering wheel to the desired
position.
X Push release lever 0003up completely.
The steering column is locked.
X Check if the steering column is locked.
When doing so, try to push the steering
wheel up or down or try to move it in the
fore-and-aft direction. Adjusting the steering wheel
electrically
0003
To adjust the steering wheel height
0004 To adjust the steering wheel position
(fore-and-aft adjustment)
i Further related subjects:
R EASY-ENTRY/EXIT feature
(Y page 99)
R Storing settings (Y page 103) EASY-ENTRY/EXIT feature
Important safety notes G
WARNING
Make sure that nobody can become trapped
when you activate the EASY-ENTRY/EXIT
feature. If there is a risk of someone becoming
trapped, stop the adjustmen
tprocedure. To
haltt he procedure:
R press the steering column adjustment
button.
R press one of the memory function position
buttons.
The steering column stops moving
immediately.
Do not keep the memory function position
button pressed as this will start the memory
function and set the steering wheel and seat
in motion.
Do not leave children unattended in the
vehicle. They could open the driver's door and
thereby unintentionally activate the EASY-
ENTRY/EXIT feature and become trapped. G
WARNING
Let the system complete the adjustment
procedure before setting the vehicle in
motion. All steering wheel adjustment must
be completed before setting the vehicle in
motion. Driving off with the steering wheel
still adjusting could cause the driver to lose
control of the vehicle.
The EASY-ENTRY/EXIT feature makes getting
in and out of your vehicle easier.
You can activate and deactivate the EASY-
ENTRY/EXIT feature in the on-board
computer (Y page 206).
Position of the steering wheel when the
EASY-ENTRY/EXIT featurei s active The steering wheel swings upwards when
you:
R
remove the SmartKey from the ignition lock
R open the driver's door and KEYLESS-GO is
in position 1
R open the driver's door and the SmartKey is
in position 0or 1in the ignition lock Steering wheel
99Seats, steering wheel and mirrors Z

The exterior mirror on the front-passenger
side moves back to its original position:
R
as soon as you exceed a speed of 9mph
(15 km/h)
R if you press button 0003for the exterior
mirror on the driver's side Memory function
Storing settings
G
WARNING
Only use the memory function on the driver's
side when the vehicle is stationary. You could
otherwise be distracted from the traffic
conditions by the seat moving of its own
accord, and as a result cause an accident. X
Adjust the seat electrically (Y page 96).
X On the driver's side, adjust the steering
wheel (Y page 99) and the exterior mirrors
(Y page 100).
X Press memory button Mand one of the
storage position buttons 1,2or 3within
three seconds.
The settings are stored in the selected
preset position .Atone sounds when the
settings have been completed. Calling up
astore dsetting
X Press and hold the relevant storage
position button 1,2or 3until the seat, steering wheel and exterio
rmirrors are in
the stored position.
i The setting procedure is interrupted as
soon as you release the storage position
button. Memory function
103Seats, steering wheel and mirrors Z