2013 MERCEDES-BENZ S-CLASS SEDAN tire pressure

[x] Cancel search: tire pressure

Page 494 of 536

MERCEDES-BENZ S-CLASS SEDAN 2013  Owners Manual (100 km) as they only reach their full
performance after this distance.
R Do not use tires that are excessively worn
as the tire traction on wet road surfaces
decreases significantly when the tread
de

Page 495 of 536

MERCEDES-BENZ S-CLASS SEDAN 2013  Owners Manual impairs cornering ability and reduces driving
stability. 
Adapt your driving style accordingly.
Have the spare wheel replaced by a normal
wheel with an M+S tire at the nearest
Mercedes-Benz Center. Sn

Page 496 of 536

MERCEDES-BENZ S-CLASS SEDAN 2013  Owners Manual Option 1) Tire and Loading Information 
placard
 
on the B-pillar on the driver's side of
the vehicle ( Y page 500).
The Tire and Loading Information placard
contains the recommended tire pressure

Page 497 of 536

MERCEDES-BENZ S-CLASS SEDAN 2013  Owners Manual If the tire pressures have been set to the
lower values for lighter loads and/or lower
road speeds, the pressures should be reset
to the higher values:
R
if you want to drive with an increased load
an

Page 498 of 536

MERCEDES-BENZ S-CLASS SEDAN 2013  Owners Manual Observe the recommended tire pressures for
cold tires
R
on 
the Tire and Loading Information placard
on the B-pillar on the driver's side,
R in the tire pressure table on the inside of
the fuel fi

Page 499 of 536

MERCEDES-BENZ S-CLASS SEDAN 2013  Owners Manual Checking the tire pressures
Important safety notes G
WARNING
Follow recommended tire inflation pressures.
Do not underinflate tires. Underinflated tires
wear excessively and/or unevenly, adversely
aff

Page 500 of 536

MERCEDES-BENZ S-CLASS SEDAN 2013  Owners Manual As an added safety feature, your vehicle has
been 
equipped with a tire pressure monitoring
system (TPMS) that illuminates a low tire
pressure telltale when one or more of your
tires are significantly

Page 501 of 536

MERCEDES-BENZ S-CLASS SEDAN 2013  Owners Manual 1. This device may not cause harmful
interference, and
2. 
this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification t